TP-Link TL-WR845N Wireless N Router Installation Guide
Access Point Mode
Range Extender Mode
WISP Mode
In this mode, the router transforms your existing wired network to a
wireless one.
In this mode, the router boosts the existing wireless coverage in your home.
In this mode, the router connects to the ISP network wirelessly in areas
without wired service.
1. Configure
A. Place the router next to your host router and power it on.
Internet
Ethernet4
B. Connect a computer to the router via an Ethernet cable or wirelessly by
using the SSID (network name) and Wireless Password printed on the
label at the bottom of the router.
INTERNET
Ethernet
Wired Router
Router
Devices
Create a password to log in.
Public Wi-Fi
Router
Devices
A. Power on the router.
D. Click Next to start the Quick Setup. Select Range Extender and follow
the step-by-step instructions to set up the internet connection.
A. Power on the router.
B. Connect the router's INTERNET port to your wired router’s Ethernet
port via an Ethernet cable as shown above.
B. Connect a computer to the router via an Ethernet cable or wirelessly by
using the SSID (network name) and Wireless Password printed on the
label at the bottom of the router.
2. Relocate
C. Connect a computer to the router via an Ethernet cable or wirelessly by
using the SSID (network name) and Wireless Password printed on the
label at the bottom of the router.
Place the router about halfway between your host router and the Wi-Fi
“dead” zone. The location you choose must be within the range of your
existing host network.
Create a password to log in.
Create a password to log in.
D. Click Next to start the Quick Setup. Select WISP and follow the
step-by-step instructions to set up the internet connection.
E. Click Next to start the Quick Setup. Select Access Point and follow the
step-by-step instructions to set up the internet connection.
Host Network
Extended Network
Host Router
Router
Devices
LED Indicators
FAQ (Frequently Asked Questions)
Q1. What can I do if the login window does not appear?
Q4. What can I do if I forgot my web management password?
LED
Description
Reboot your router and try again.
If the computer is set to a static IP address, change its settings to obtain an IP
address and DNS server address automatically.
Use another web browser and try again.
Disable and then enable the network adapter being used.
Refer to FAQ > Q3 to reset the router, and then create a password to log in.
Solid on:
Q5. What can I do if I forgot my wireless network password?
Router Mode: The INTERNET port is connected, but internet is unavailable.
Access Point Mode: The INTERNET port is not connected.
Orange Range Extender Mode: The router is not connected to the host network.
WISP Mode: Internet is unavailable.
The factory default wireless password is printed on the label of the router.
Connect a computer directly to the router using an Ethernet cable. Log in to the
router’s web management page, and go to Wireless > Wireless Security to obtain
or reset your wireless password.
Blinking:
Safety Information
The INTERNET port is not connected while in Router Mode.
Q2. What can I do if I cannot access the internet when in Router mode?
Internet LED
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Reboot your modem and router, then try again.
Solid on:
Router/WISP Mode: Internet is available.
Access Point Mode: The INTERNET port is connected.
Range Extender Mode: The router is connected to the host network.
Check if the internet is working normally by connecting a computer directly to the
modem using an Ethernet cable. If it is not, contact your Internet Service Provider.
Green
Log in to the web management page of the router, and go to the Status page to
check whether the WAN IP address is valid or not. If it is, please run the Quick Setup
again; otherwise, recheck the hardware connection.
For cable modem users, log in to the web management page of the router. Go to
Network > MAC Clone, select Clone MAC Address and click Save. Then reboot
both the modem and the router.
Do not use the device where wireless devices are not allowed.
Adapter shall be installed near the equipment and shall be easily accessible.
Blinking:
The system is starting up or firmware is being upgraded*.
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of the Radio Equipment Regulations 2017.
LAN LED Green Solid on: At least one LAN port is connected.
Solid on:
Wireless function is enabled.
Blinking:
Q3. How do I restore the router to its factory default settings?
Green
Wi-Fi LED
With the router powered on, press and hold the RESET button on the back panel of
the router for more than 2 seconds until all LEDs turn off. The router will reboot.
WPS connection is in progress. This may take up to 2 minutes.
For technical support, replacement services, user guides, and other
scan the QR code.
Log in to the web management page of the router. Go to System Tools > Factory
Defaults, and click Restore. The router will restore and reboot automatically.
* To avoid device damage, do not disconnect or power off your router during the upgrade.
| General | Details |
|---|---|
| Name | TP-Link TL-WR845N Wireless N Router Installation Guide |
| Make | TP-Link |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.21 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding TP-Link TL-WR845N Wireless N Router Installation Guide, please ask here and describe the problem in detail.
TP-Link VR300 Archer Modem Router User Guide
TP-Link T150500-2-DT WiFi Router Instruction Manual
TP-Link Archer AX55 Wi-Fi 6 Router Installation Guide
TP-Link Omada ER8411 VPN Router Instructions
TP-Link Configure VDSL Router User Guide
TP-Link Archer BE805 BE19000 Tri-Band Wi-Fi 7 Router User Manual
TP-Link VR600 Wireless DSL Modem Router Installation Guide
TP-Link AX58 Dual Band Gigabit Wi-Fi 6 Router Installation Guide
TP-Link AC750 Wireless Dual Band Router Owner’s Manual
TP-Link AX6000 8-Stream Wi-Fi 6 Router Installation Guide
TP-Link Omada ER605 Gigabit VPN Router User Guide
Cudy AC1200 WiFi Mesh Router User Guide
UBIQUITI NETWORKS ER-12 10 Port Gigabit Router User Guide
ZYXEL NR7302,NR7303 5G NR Outdoor Router Instruction Manual
TP-Link AX53 Smart Internet Router User Guide
TP-Link AX3000 Wi-Fi 6 Air Router Installation Guide
Tenda 4G06V1.0 4G LTE and VoLTE Router User Guide
Juniper NETWORKS SSR120 Smart Router User Guide
NIRAD Networks N200-I-SDWAN-EDGE EDGE Router Installation Guide
ASUS ZenWiFi BD4 Be3600 Dual Band Wi-Fi Router User Guide