altice UBN2309 XGS-PON Labs Delivers Router Instruction Manual

1

2

3

4

UBN2309 Safety Manual  

INSTALLATION INSTRUCTIONS  

•

1. Plug one end of a fiber optic cable into the green  

PON (passive optical network) port on the rear  

panel of the device. The connector will “click” into  

place when properly installed. Plug the other end  

into the optical wall outlet. WARNING: Do not look  

directly into the optical cable end or directly into  

the PON port as eye injury may occur.  

2

RJ-11  

Analog Phone  

2. For telephone service, connect one end of another  

RJ-11 phone cable (not included) to one of the grey  

PHONE ports. Connect the other end of the cable  

to the RJ-11 port of an analog telephone. Note that  

voice service must be provisioned by your service  

provider.  

3

RJ-45  

Computer  

3. Connect an Ethernet cable (not supplied) to one of  

the yellow LAN (Ethernet) ports on the back panel  

of the modem and connect the other end to the  

Ethernet port of a PC. Use a Category 5e or  

Category 6 Ethernet cable. A PC should be  

connected initially for device installation and  

configuration.  

ON/OFF  

5

4

Power Outlet  

4. Connect the power adapter (supplied) to the  

POWER port. Connect the other end to a power  

outlet.  

1

FIBER  

5. Turn the modem on by pressing the ON/OFF  

button the rear panel.  

Optical Outlet  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	altice UBN2309 XGS-PON Labs Delivers Router Instruction Manual
Make	altice
Language	English
Filetype	PDF (Download)
File size	0.89 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• altice

Questions and Answers (0)

If you have any questions regarding altice UBN2309 XGS-PON Labs Delivers Router Instruction Manual, please ask here and describe the problem in detail.