Amped Wireless R10000 High Power Wireless N 600mW Router User Guide

1

2

?

Need Help? Give us a call.  

Phone: 888-573-8820  

Email: techsupport@ampedwireless.com  

Web: www.ampedwireless.com/support  

SETUP GUIDE  

— R E A D F I R S T —  

R10000  

High Power Wireless-N 600mW Smart Router  

Disconnect and Power Off your Existing Router (If you have one)  

1

Disconnect your existing router from your computer, your  

broadband modem and its power outlet. If you do not have an  

existing router please continue to Step 2.  

Modem  

Existing Router  

Power Off your Modem  

2

3

Power off the Modem by disconnecting the Modem’s power  

adapter from the power outlet. If your Modem has a backup  

battery, remove the backup battery from your Modem.  

Remove  

Backup battery  

Do NOT power on your Modem until Step 4.  

Modem  

Connect the High Power Router to your Modem  

Use the included blue Ethernet cable and  

connect one end of the cable to your Modem.  

a

Connect the other end of the cable to the blue  

b

port on the High Power Router.  

Modem  

Do NOT connect the power adapter  

to the High Power Router at this time.  

Modem  

High Power Router  

Power on your Modem  

4

5

Plug in the power adapter and reinsert the backup battery  

(if available) to power on the Modem.  

Reinsert  

Backup battery  

Allow a minute or two for the Modem to initiate.  

Modem  

Power On the High Power Router and Connect it to your Computer  

Attach the two included Antennas.  

Connect the included grey Ethernet cable to an  

available network port on your computer.  

Attach the Power Adapter to the the High Power  

Router’s  

PWR  

port and a power outlet.  

Open your Web Browser  

6

Enter the setup web address into your browser:  

http://setup.ampedwireless.com  

If the URL fails to open, then try: http://192.168.3.1  

When prompted enter the login and password:  

LOGIN:  

admin  

admin  

PASSWORD:  

NOTE: IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU  

IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU...  

Disable any third party firewalls that your computer may have on (i.e. Norton/Symantec/Windows).  

Check to see that your computer is NOT connected to any wireless networks.  

Accessing the setup menu does not require Internet access. The menu is served from the Router.  

Welcome to the Smart Setup Wizard  

7

The Smart Setup Wizard will guide you  

through the following settings:  

1

2

3

Internet Connection Settings  

System Clock  

Wireless Settings  

Click Start to begin.  

8

Configure your Internet Connection  

Configure your Internet settings using  

the automatic settings.  

More advanced users may choose to  

configure their connection manually by  

selecting Manual Configuration.  

If your Internet provider requires that you  

login before accessing the Internet you will  

need to do so under Manual Configuration.  

If there was a problem with the Automatic  

Configuration, the wizard will notify you of the  

issue. If you continue to have problems, contact  

our support department at 888-573-8820.  

If the Automatic Configuration was successful,  

you will be directed to a Configuration  

Successful page.  

Click Next to continue.  

Set the System Clock  

9

The System Clock is used for system logs  

and setting schedules for Internet access.  

Click Sync to synchronize the System Clock  

with the time on your computer.  

Click Next to continue.  

10  

Configure your Wireless Settings  

The default ID of your wireless network is:  

Amped_Network  

To change it, enter a new name in the SSID  

field. Users connecting wirelessly to the Router  

will use this ID to identify your  

wireless network.  

Click Next to continue.  

11  

Wireless Security Settings  

The default Security Key (WPA/WPA2) of your  

wireless network is: wireless  

To change it, enter a new key in the Security Key  

field. The key must be at least 8 characters long.  

Click Next to apply your settings. The High  

Power Router will reboot. This process may take  

up to 1 minute. The page will automatically  

reload after the countdown. If it does not, you  

may need to refresh the page manually or check  

your connection to the router.  

Setup Summary  

12  

Congratulations, the High Power Router is now  

successfully configured. Your settings are now  

saved. You may now connect additional devices  

directly to the 4 wired ports on the back panel,  

or connect wirelessly to the High Power Router.  

If you experience any problems at any point during the  

Setup Wizard process, please contact Amped Wireless  

Technical Support. We’re here to help:  

Phone: 888-573-8820  

Email: techsupport@ampedwireless.com  

Web: www.ampedwireless.com/support  

https://manual-hub.com/  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Amped Wireless R10000 High Power Wireless N 600mW Router User Guide
Make	Amped Wireless
Language	English
Filetype	PDF (Download)
File size	0.55 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Amped Wireless

Questions and Answers (0)

If you have any questions regarding Amped Wireless R10000 High Power Wireless N 600mW Router User Guide, please ask here and describe the problem in detail.