BEC 7000 R26-W Gigabit LTE Outdoor Router with Hotspot User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

7000 R26-W Gigabit LTE Outdoor Router with Hotspot  

Troubleshooting  

1. None of the LEDs are on when you turn on the BEC Device.  

Check the connection between the adapter and the router. If the error persists, you may have  

a hardware problem. In this case you should contact technical support.  

2. You have forgotten your BEC login and/or password.  

Try the default login and password, please refer to User Manual or consult with your Internet  

Service Provider. If this fails, you can restore your router to its factory settings by holding the  

Reset button on the back of your router for 6 seconds or more. *This username / password may vary  

by different Internet Service Providers.  

3. Cannot ping any PCs on the LAN.  

Check the LAN (PoE) LED on the Router. The LED should be on for the port that has a PC  

connected. If it is off, check the cables between your Router and the PC. Make sure you have  

uninstalled any software firewall for troubleshooting. Verify that the IP address and the subnet  

mask are consistent between the router and the workstations.  

Product Support and Contact Information  

Most problems can be solved by referring to the Troubleshooting section in the User Manual. If  

you have other inquiries or need further technical support, please contact with your Internet  

Service Provider or visit us at www.bectechnologies.net  

15  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BEC 7000 R26-W Gigabit LTE Outdoor Router with Hotspot User Guide
Make	BEC
Language	English
Filetype	PDF (Download)
File size	0.71 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• BEC

Questions and Answers (0)

If you have any questions regarding BEC 7000 R26-W Gigabit LTE Outdoor Router with Hotspot User Guide, please ask here and describe the problem in detail.