CONTEMPORARY CONTROLS BASRTSX-B Multi Network Router Installation Guide

1

2

MS/TP Physical Layer Connection Options  

For MS/TP devices that share a power source with the BASRTSX-B  

3-wire MS/TP Bus with Shared Power Source  

2-wire MS/TP Bus with Shared Power Source  

BASRTSX-B  

BASRTSX-B  

COM  

COM  

SH  

SH  

Up to 31  

Up to 31  

Full-load  

MS/TP Devices  

Full-load  

MS/TP Devices  

If connecting the  

cable shield to the SH pin,  

If connecting the  

cable shield to the SH pin,  

EIA-485  

EIA-485  

then the  

pin  

then the  

pin  

must also be  

tied to chassis.  

must also be  

tied to chassis.  

(optional) NOTE: This is required if SC connects to COM as shown. If LO  

(optional) NOTE: This is required if SC connects to COM as shown. If LO  

does not connect to earth, then SC must be connected to earth.  

does not connect to earth, then SC must be connected to earth.  

For MS/TP devices that use a power source separate from the BASRTSX-B  

2-wire MS/TP Bus with Separate Power Sources  

3-wire MS/TP Bus with Separate Power Sources  

BASRTSX-B  

BASRTSX-B  

COM  

SH  

COM  

SH  

Up to 31  

Up to 31  

Full-load  

MS/TP Devices  

EIA-485  

Full-load  

MS/TP Devices  

EIA-485  

If connecting the  

cable shield to the SH pin,  

If connecting the  

cable shield to the SH pin,  

then the  

pin  

then the  

pin  

must also be  

tied to chassis.  

must also be  

tied to chassis.  

(optional)*  

(optional)*  

(optional)*  

* NOTE: This is required if SC connects to COM as shown. If LO does not connect to earth, then SC must be connected to earth.  

Web Page Configuration  

The BASrouterSX contains an interactive web server accessible from any Internet-compatible PC on the local network with recent versions of most standard web browsers  

such as Microsoft Internet Explorer, Microsoft Edge, Mozilla Firefox, or Google Chrome installed.  

To configure the router initially, connect it to your Windows PC using an Ethernet cable and set the PC’s IP and subnet mask in Local Area Connection –> Properties. In the  

Internet Protocol Version 4 (TCP/IPv4) settings of your Windows PC, specify an IP address and a Subnet mask in the same subnet as the BASrouter (e.g. 192.168.92.5 /24).  

BASrouterSX’s factory-programmed: Default IP address is 192.168.92.68 and a Class C subnet mask of 255.255.255.0 (/24) User Name is: admin and Password is: admin  

ATTENTION: The default login credentials must be changed before the BASrouterSX can be used or its system configuration altered. Please change the username to an  

8-63 character alphanumeric value (at least one letter and one number), and the password to an 8-63 character alphanumeric and the optional special characters allowed  

(~!@#%^+[ ]{ }_) value. This ensures authorized access to the router only.  

Reset IP switch is located on the front, underneath Power LED. Press and hold the Reset IP button using a paper clip for at least 5 seconds while the router is powered.  

Remove power and restore power again to complete the reset IP, User ID, and Password procedure to factory-programmed defaults.  

TD220500-0IA  

Contemporary Control Systems, Inc. reserves the right to make changes in the specifications of the product described within this manual at any time without notice and without obligation of Contemporary Control Systems, Inc.  

to notify any person of such revision or change.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	CONTEMPORARY CONTROLS BASRTSX-B Multi Network Router Installation Guide
Make	CONTEMPORARY CONTROLS
Language	English
Filetype	PDF (Download)
File size	0.41 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• CONTEMPORARY CONTROLS

Questions and Answers (0)

If you have any questions regarding CONTEMPORARY CONTROLS BASRTSX-B Multi Network Router Installation Guide, please ask here and describe the problem in detail.