DrayTek V4.3.2.5 Vigor1000B Multi WAN Security Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

3. Hardware Installation  

This section will guide you to install the router through hardware connection and  

configure the router’ s settings through web browser.  

3.1 Connecting Device  

Before starting to configure the router, you have to connect your devices  

correctly.  

1. Connect a modem to any WAN port of Vigor1000B with Ethernet cable  

(RJ-45) to access Internet.  

2. Connect the other end of the cable (RJ-45) to the Ethernet port on your  

computer (that device also can connect to other computers to form a small  

area network). The LAN LED for that port on the front panel will light up.  

3. Connect a server/ router (depends on your requirement) to any WAN port  

ofVigor1000B with Ethernet cable (RJ-45). The WAN LED will light up.  

4. Connect the power cord toVigor1000B’ s power port on the rear panel, and  

the other side into a wall outlet.  

5. Power on the device by pressing down the power switch on the rear panel.  

The PWR LED should be ON.  

6. The system starts to initiate. After completing the system test, the ACT LED  

will light up and start blinking.  

Below shows an outline of the hardware installation for your reference.  

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	DrayTek V4.3.2.5 Vigor1000B Multi WAN Security Router User Guide
Make	DrayTek
Language	English
Filetype	PDF (Download)
File size	0.3 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• DrayTek

Questions and Answers (0)

If you have any questions regarding DrayTek V4.3.2.5 Vigor1000B Multi WAN Security Router User Guide, please ask here and describe the problem in detail.