Draytek Vigor2767 Series Security Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Vigor2767 Series  

35b Security Router  

Quick Start Guide  

(For RF Model)  

Version: 1.0  

Firmware Version: V5.3.0_RC  

(For future update, please visit DrayTek web site)  

Date: June 27, 2024  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Draytek Vigor2767 Series Security Router User Guide
Make	DrayTek
Language	English
Filetype	PDF (Download)
File size	0.27 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• DrayTek

Draytek Vigor2767 Series Security Router User Guide Overview

Summary of Contents

• Page 1: Vigor2767 Series Security Router Quick Start Guide provides essential information for installation and setup. The guide is for the RF model and is based on firmware version V5.3.0_RC. For future updates, users are advised to visit the DrayTek website.
• Page 2: Read the installation guide thoroughly before you set up the router. The router is a complicated electronic unit that may be repaired only by authorized and qualified personnel. Do not try to open or repair the router yourself. Do not place the router in a damp or humid place, e.g., a bathroom. The router should be used in a sheltered area, within a temperature range of 0 to +40 Celsius. Do not expose the router to direct sunlight or other heat sources. Do not deploy the cable for LAN connection outdoor to prevent electronic shock hazards. Do not power off the device when saving configurations or firmware upgrades. Please disconnect the Internet connection on the device before powering it off when a TR-069/ACS server manages the device. When you want to dispose of the router, please follow local regulations on conservation of the environment. Keep your purchase receipt in a safe place as it serves as proof of date of purchase. This warranty will not apply if the product is modified, misused, tampered with, or damaged by an act of God.
• Page 3: Declaration of Conformity DrayTek Corporation declares that the equipment type Vigor2767 series is in compliance with Radio Equipment Directive 2014/53/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address. Frequency Information for Europe area: This product is designed for DSL and 2.4GHz /5GHz WLAN network throughout the EC region. DrayTek Corporation declares that the equipment type Vigor2767 is in compliance with the Radio Equipment Regulations 2017 and The Electrical Equipment (Safety) Regulations 2016. The full text of the UKCA declaration of conformity is available at the following internet address. Frequency Information for UK area: This product is designed for DSL and 2.4GHz /5GHz WLAN network use in the UK & Ireland.
• Page 4: Regulatory information outlines compliance with FCC rules for Class B digital devices. Equipment must be installed and used according to the provided instructions to avoid harmful interference. Users should try to correct interference by reorienting the receiving antenna, increasing separation between equipment and receiver, or consulting a technician. This device complies with Part 15 of the FCC Rules, which includes conditions on interference. The availability of specific channels and operational frequency bands is country-dependent and factory programmed. Equipment must be installed to maintain a separation distance of at least 20 cm from all persons. Antenna installation instructions and operating conditions must be provided to ensure RF exposure compliance. The device has been approved by the FCC to operate with specific antenna types and gains. Antenna types with gains greater than specified are prohibited for use with this device. The antenna connector is of Reverse SMA type.
• Page 5: Caution Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. The antenna/transmitter should be kept at least 20 cm away from human body. The external power supply used for each product will be model dependent. Input voltage: 100~240V Input AC frequency: 50/60Hz Output voltage: 12.0V Output current: 1.0A to 3.0A depending on the model. Output power: 12.0W to 36.0W depending on the model. Average active efficiency varies by model. Efficiency at low load (10%) varies by model. No-load power consumption varies by model.
• Page 6: Package content Panel explanation Hardware installation Network connection Wall-mounted installation Software configuration
• Page 7: Panel explanation of the Vigor2767ax includes various LED indicators that provide status updates. The router is powered on and running normally when the status LED is blinking. The router is powered off when the status LED is off. The DSL/Ethernet link is up, waiting for the Internet connection when the LED is blinking. The DSL connection is ready for training when the LED is orange. The router is ready to access the Internet through the DSL link when the LED is green. Data transmission is indicated by the LED blinking. The wireless access point is ready when the LED is on. The WPS function is enabled and active when both ACT and WLAN LEDs blink quickly. The wireless access point is turned off when the LED is off. A USB device is connected and active when the USB LED is on. Data transmission occurs when the USB LED is blinking.
• Page 8: WLAN On - Press the button and release it within 2 seconds. When the wireless function is ready, the green LED will be on. WLAN Off - Press the button and release it within 2 seconds to turn off the WLAN function. When the wireless function is not ready, the LED will be off. WPS - When WPS function is enabled by web user interface, press this button for more than 2 seconds to wait for client’s device making network connection through WPS. Factory Reset - Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration. Connector for accessing the Internet. Connector for remote networked devices (by Ethernet cable).
• Page 9: The router is powered on and running normally. The router is powered off. The DSL connection is ready for training. The router is ready to access the Internet through DSL link. The wireless access point is ready. The data is transmitting via wireless connection based on the rate of 2.4GHz. The WPS function is enabled and active. The wireless access point is ready for 5GHz connection. The LAN port is connected. A USB device is connected and active. The data is transmitting. The DSL/Ethernet module does not link or disable by configuration.
• Page 10: WLAN On - Press the button and release it within 2 seconds. When the wireless function is ready, the green LED will be on. WLAN Off - Press the button and release it within 2 seconds to turn off the WLAN function. When the wireless function is not ready, the LED will be off. WPS - When WPS function is enabled by web user interface, press this button for more than 2 seconds to wait for client’s device making network connection through WPS. Factory Reset - Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. DSL - Connector for accessing the Internet. 2.5G WAN - Connector for remote networked devices (by Ethernet cable). P1~P4 - Connectors for local networked devices. USB1~USB2 - Connector for a USB device (for 3G/4G USB Modem or printer). Phone1/Phone2 - Connector of analog phone for VoIP communication. I/O - Power Switch. PWR - Connector for a power adapter.
• Page 11: Hardware installation This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. Before starting to configure the router, you have to connect your devices correctly. Connect the DSL interface to the land line jack with a DSL line cable. Connect one port of 4-port switch to your computer with a RJ-45 cable. Connect detachable antennas to the router. Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity. Power on the router. Check the ACT and DSL, LAN LEDs to assure network connection.
• Page 12: Wall-mounted installation Vigor router has keyhole type mounting slots on the underside. Drill two holes on the wall. The distance between the holes shall be 168mm. Fit screws into the wall using the appropriate type of wall plug. With the screws installed, the router can be slotted into place. The recommended drill diameter shall be 6.5mm (1/4”). When you finished about procedure, the router has been mounted on the wall firmly.
• Page 13: Software configuration By default, you can access the Internet if you finish the hardware installation. You might need to access the web user interface of the Vigor router. Make sure your PC connects to the router correctly. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to ask for username and password. Please type “admin/admin” as the Username/Password and click Login. You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the default IP address of Vigor router 192.168.1.1.
• Page 14: Now, the main screen will pop up. The home page will change slightly in accordance with the router you have. If the router cannot work correctly after trying many efforts, please contact your dealer/DrayTek for further help right away. Web registration is preferred. You can register your Vigor router via myvigor.draytek.com. Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please consult the DrayTek website for more information on the newest firmware, tools, and documents.