EDR-G9004 Series Moxa Secure Router Installation Guide
ATTENTION
Safety First!
Be sure to disconnect the power cord before installing and/or
wiring your EDR-G9004 Series.
Calculate the maximum possible current in each power wire
and common wire. Observe all electrical codes dictating the
maximum current allowable for each wire size.
If the current goes above the maximum ratings, the wiring
could overheat, causing serious damage to your equipment.
Please read and follow these guidelines:
•
Use separate paths to route wiring for power and devices. If power
wiring and device wiring paths must cross, make sure the wires are
perpendicular at the intersection point.
NOTE: Do not run signal or communications wiring and power
wiring through the same wire conduit. To avoid interference, wires
with different signal characteristics should be routed separately.
You can use the type of signal transmitted through a wire to
determine which wires should be kept separate. The rule of thumb
is that wiring sharing similar electrical characteristics can be
bundled together.
•
•
•
•
You should separate input wiring from output wiring.
We advise that you label the wiring to all devices in the system.
This product is intended for installation in Restricted Access
Location.
WARNING
Hot Surface. Do not touch.
ATTENTION
The SFP module only supports Laser Class 1 optical
transceivers.
Grounding the EDR-G9004 Series
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from
the ground screw (M4 type) to the grounding surface prior to
connecting devices.
ATTENTION
This product is intended to be mounted to a well-grounded
mounting surface such as a metal panel. Use the green-and-
yellow cable type AWG (American Wire Gauge) min.18 (0.75
mm2) for grounding.
- 8 -
| General | Details |
|---|---|
| Name | EDR-G9004 Series Moxa Secure Router Installation Guide |
| Make | MOXA |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.29 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding EDR-G9004 Series Moxa Secure Router Installation Guide, please ask here and describe the problem in detail.
MOXA EDR-8010-2GSFP Secure Router Installation Guide
MOXA TN-4900 Series Gigabit Security Router Owner’s Manual
MOXA TN-4908-WV-CT-T Tough Net Router Installation Guide
MOXA TN-5916 ToughNet NAT Router Installation Guide
MOXA EDR-810 Secure Router Installation Guide
MOXA EDR-8010 Series Secure Router Installation Guide
MOXA G4302-LTE4-US-T Cellular Router Owner’s Manual
DrayTek VigorLTE 200 Series LTE Router User Guide
JUNIPer SSR120 Session Router User Guide
D-Link AX3200 Smart Router Owner’s Manual
TCL HH515L Odnowiony Router User Guide
LANCOM SYSTEMS LANCOM 1790-4G Plus High-Performance VPN Router Instruction Manual
TELTONIKA OTD140 4G Outdoor Router User Guide
Cudy LT450 4G LTE AC1200 Dual Band WiFi Router User Manual
LANCOM SYSTEMS 1790VAW GmbH Performance Router User Guide
Cudy X6 AX1800 1800mbps Dual Band Smart Wi-Fi 6 Router Installation Guide
Firstnum C401 CPE Router User Manual