ELPRO 641M-2 4G LTE Router Installation Guide
641M-2 4G LTE Router
INSTALLATION GUIDE
Dimensions
Setting the basic connection and APN
S T R
1. Remove the screw from the small
plate on the top/side of the modem
to access the SIM card holder.
5.
Upon first connection after a factory default (Out
of the Box) the modem is configured to auto
detect network APN. If successful, Active Link
Information will be listed in modem home page.
If not then navigate to Link Management-Cellular
and select the Cellular tab and then click on the
edit button on right side for SIM1. Turn off Auto
APN and enter the APN details. Once change is
done, click save. Then click on apply and router
will connect to network. Recheck status after 1-
2 minutes.
2 M S I
1 M S I
Insert the SIM card(s) Into the SIM
sockets. Push SIM card all the way
until there is a positive click and
SIM card is retained. To remove just
push the SIM card down and it will
106 mm (4.17")
40 mm (1.57")
spring back up.
MAIN AUX
2. Before switching on the modem, please
ensure the antennas are securely
Its strongly recommended to change password
from default.
SYS NET USR
connected and connect the 9-48 Vdc
power supply to the V- and V+. GND
terminal should be connected to surge
DO1 DI1
DO2 DI2
COM GND
earth.
A
B
TX
RX
0
3. Connect any of the Modems Ethernet
ports to a PC via an RJ45 Ethernet cable.
Set the PC to obtain an IP address
Eth0
Eth1
automatically from the modem router.
The PC will get an IP address in the range
641M
of 192.168.1.XXX.
6.
When all Settings are configured navigate
back to: Link Management > Cellular and
the Connection should show as
“Registered”.
4G LTE Router
4. Open the Web browser
and type in 192.168.1.1
into the Address bar. A
Login window will appear,
enter the login details as:
Username = admin and
Password = admin
NOTES:
All I/O connections must be SELV
§ 9-48Vdc Supply or internal battery charger input, 1A NEC Certified Class 2
Environmental Specification:
Ingress Protection
IP30
Operating Temp ext supply -40 to 75°C (-40 to 167°F)
Altitude
3000m
Pollution Degree
Internal Humidity
4
Max 95% non-condensing
V1.02
| General | Details |
|---|---|
| Name | ELPRO 641M-2 4G LTE Router Installation Guide |
| Make | ELPRO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.34 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ELPRO 641M-2 4G LTE Router Installation Guide, please ask here and describe the problem in detail.
ELPRO 645M-4 Cellular and WiFi IIoT Router Installation Guide
ELPRO 641M-X Iot Connectivity 4g-Lte Router User Manual
ELPRO 641M-X Connectivity Router Instructions
TELTONIKA RUTM31 Router User Guide
Harvilon MF302 4G LTE Wi-Fi Router User Guide
xiaomi 610645 4A Mi Router Instruction Manual
TP-Link AX21 Wi-Fi 6 Router Installation Guide
TP-Link TL-ER7206 Omada Gigabit VPN Router Installation Guide
CSG m212 Dual SIM Wi-Fi 6 Router User Guide
Tenda 4G03 Pro Wi-Fi LTE Router Installation Guide
NETGEAR AX1800 WiFi 6 Router User Guide
FiberHome SR120CC Router User Manual
STARLINK Router Installation Guide