FIRSTNUM CPE C1 WiFi Router User Manual
Size:65mmx110mm 128g铜版纸 双面四色印刷 单网口不带RJ11
Product List
LED NAME
LED STATUS
STATUS DESCRIPTION
2.After the CPE is connected to the power supply, press and hold the power button
for 3 seconds.
The green light
is always on
Power cord connected to device
Power cord connected to device
POWER
(WITHOUT BATTERY)
Lights out
1
Plug the power cord into the back of the CPE.
The green light
is always on
Power cord connected to device/battery 70%-100%
The yellow light is
always on
The red light is
always on
Power cord is not connected to the device/ battery 21%-69%
POWER
(WITH BATTERY)
Power cord is not connected to the device/battery 1%-20%
Lights out
Power cord connected to device/battery 0%
Battery (Optional)
Power Adapter Cable
Сable
The green light is
always on
Ethernet uplink connection is successful/SIM card
recognized/data can be transferred
Ethernet upstream not connected/SIM card
not recognized/No network
DATA
nano-SIM
Do not insert or remove a SIM card when the router is running,
as this may affect performance or damage the SIM card.
TRANSMISSION
Lights out
The green light is
always on
INTERFACE DESCRIPTION
WiFi is working
WPS connection in progress
USER MANUAL
WIFI
The green light flashest
Lights out
WiFi is not working
One green light
Connected to the network and the signal is weak
Two green lights
Three green lights
Lights out
Connected to the network and the signal is medium
Connected to the network and the signal are strong
No network signal
SIGNAL
WPS
POWER
Note: 1.After pressing the RESET button, all lights out. After 3 seconds, the device reboots.
2. When the Sim card is connected to the Internet and the WAN Internet access exists at the same time,
the WAN Internet access is the priority by default.
SETUP
WPS BUTTON
Connect to the Internet quickly
POWER BUTTON
Press and hold to switch the machine on and off
1.Insert
the
SIM
card
1
Prepare one nano-SIM card.
Indicator light working status
mini-SIM(2FF)
micro-SIM(3FF)
nano-SIM(4FF)
2
There is a place for inserting a SIM card at the bottom of the CPE.
2
On the top of the CPE, press and hold the power button for 3 seconds,and the power
light will turn on.
RESET HOLE
Press the reset
Before use CPE Router
hole for 3-5 seconds,
restore the factory
settings
WPS
POWER
Please read the User manual carefully and Keep it.
Pay attention to the card orientation
LAN/WAN
POWER LED
DATA
WiFi LED
SIGNAL LED
POWER PORT
Turn on the power
of the CPE device.
3
The number of lights indicates
the strength of the signal
Insert the SIM card in the direction shown by the icon at the slot,simply push
forward when inserting,hear a "click" sound,Indicates that the SIM card is inserted.
TRANSMISSION LED
USB PORT
Connection Computer
连接电脑
plug from the power outlet.
Please do not drop or hit the power source. When the power source casing is damaged, please contact the
3.Connecting to your router's Wi-Fi network
2
After successfully logging into the background, click My Wi-Fi.
You can change the wifi name and password
●
FAQS
CPE WARRANTY CARD
1
The computer connects to the LAN port of the CPE product through a network cable.
authorized service center for replacement.
● If the power plug or power cord is damaged, do not continue to use it to avoid electric shock or fire.
● Do not touch the power cord with wet hands, or pull the power cord to unplug the power source.
1.How to restore the factory default Settings?
192.168.1.1
●
Do not touch the device or power supply with wet hands to avoid short-circuit, malfunction or electric shock
of the device.
When the power supply is exposed to rain, liquid, or severely damp, please stop using it and contact an
authorized service center for replacement.
The power supply must meet the requirements of "2.5 Restricted Power Supply" in the standard 《GB4943.1
After the router is turned on, use a pointed object (paper clip, pen tip, etc.) to insert it into the reset
hole, and all the indicator lights are off. 3 seconds later, the device restarts. A factory reset will erase
all custom settings, please exercise caution.
User profile
●
Cable
Notebook
computer
Desktop
Computer
●
2.How to use WPS to connect the Router?
1
Safety of Information Technology Equipment》.
1.Press the WPS button on top of the CPE for 3 seconds, and the wifi indicator starts to flash
2.Enable WPS on other device within 2 minutes to connect to the CPE
2
Once the router has connected to a mobile data network,you can connect your computer
or mobile phone to the router's Wi-Fi network to access the Internet. Please refer to the
label on the bottom of the router for the default wireless network name and password.
Name
Phone number
Product name
Children's health
Enter
Enter
a
a
WIFI name
2
3
●
This device and its accessories may contain some small parts. Please keep the device and its accessories out
of the reach of children.
Mailing Address
Outlets
WIFI password
3.Why can't I access the router's web-based management page?
Children may inadvertently damage the device and its accessories, or swallow small parts, causing suffocation
or other hazards.
1.Ensure that your computer is connected to the router through an Ethernet cable or Wi-Fi.
2.Ensure that your computer is set to obtain an IP address and DNS server address automatically.
3.Restart your browser, or try using another browser.
● This device is not a toy. Children should use the device under adult supervision.
Device model
4.If the problem persists, restore the router to its factory settings.
MAINTENANCE SERVICE TERMS
Sales Order No.
Notebook
Computer
Security Information
Before using and operating the equipment, please read and observe the following precautions to ensure the
best performance of the equipment and avoid dangerous or illegal situations.
1. Warranty:
3
After the setting is completed, please connect to the WiFi again,
and you can access the Internet
● Within one year of the shipment of the goods, if there is a fault that is proven to be caused by a defect
in product materials or workmanship,
Electronic equipment
the manufacturer will repair or replace it free of charge.
5.Connect CPE and Internet through network cable
Do not use this device in places where the use of wireless devices is expressly prohibited, otherwise it will
interfere with other electronic devices or cause other hazards.
Sticker on back of device
● The warranty period of all repaired or replaced parts is 90 days from the date of dispatch of the goods.
When your SIM card uses up data traffic, you can connect the WAN interface of the device to
the ONU through a network cable to connect to the Internet.
●
Under normal use (non-human damage), the warranty period of all parts is one year from the date of
Printed with initial username
and password
Cellphone
shipment.
Maintenance record
Impact on medical equipment
Man-made damages include but are not limited to water, liquid, heavy pressure, falling, self-demolition,
●
In medical and health care facilities where the use of wireless devices is expressly prohibited, please abide by
etc.
the regulations of the facility and turn off the device. The radio waves generated by the device may affect the
normal operation of implantable medical devices or personal medical devices, such as pacemakers, cochlear
implants, and hearing aids. If you use these medical devices, pleaseconsult their manufacturers about the
restrictions on the use of this device.
●
Failures caused by force majeure (such as war, earthquake, lightning, etc.), improper use, abnormal
Cable
4.Change WIFI name and password
operation, transformation, normal wear and tear or
DATE
PHENOMENON
REASON
REMARKS
Ensure that you promptly change the default login password for the web based
management page to prevent unauthorized users from changing the router's settings.
ONU
accidents are not covered by the warranty.
●
When using this device, please keep
pacemakers, cochlear implants, etc.). Flammable and explosive area .
Do not use this equipment in gas stations (maintenance stations) or near any flammable and explosive areas
a
distance of at least 15 cm from implanted medical devices (such as
● The manufacturer does not assume any risk or responsibility for damage or loss caused by the specific
use or application of the product.
1
After the CPE is connected to the computer,Open the browser on the computer
and enter 192.168.1.1 to log in to the CPE product background.
PRODUCT SPECIFICATIONS
●
●
The manufacturer's compensation for breach of contract, negligence or infringement related to the
such as flammable materials and chemicals, and follow all graphics or text instructions. In or around fuel or
product shall not exceed the amount of the product sold.
192.168.1.1
chemical storage and transportation areas or explosive areas, the equipment may cause an explosion or fire.
Colour
White
For goods that need to be repaired during the warranty period, the buyer will provide the following
product information with the goods when returning it for repair:
(1). Model
●
Do not store or transport the device and its accessories in the same box as flammable liquids, gases, or
explosive materials. Traffic safety
Dimensions
Weight
183X120X40mm
● Observe the relevant regulations of your region or country, and do not use this device while driving.
(2). Delivery date, order number, sales order number or manufacturer invoice number
About 340g with battery; About 248g without battery
3GPP:R8,R9
●
Remember that safe driving is your first responsibility, and do not engage in activities that will distract your
attention.
The electronic equipment of the car may malfunction due to the radio interference of the equipment. Please
(3). Describe the failure phenomenon in detail If there is
covered by the above warranty terms,
a
dispute about the repair of
a
product not
●
please attach a written explanation when returning it.
contact the manufacturer for details.
WCDMA/HSPA:B1/B5/B8
TDD-LTE:B34/B38/B39/B40/B41
FDD-LTE:B1/B3/B5/B7/B8/B20/B28
CAT4 DL 150Mbps, UL 50Mbps
2.4G,802.11b/g/n
admin
● Do not place the device above the car's airbag or in an area that can be reached after the airbag is deployed.
Network and
Standard
2. Maintenance:
Otherwise, when the safety airbag is inflated, the equipment will be pushed by
a
strong external force and
For faulty products that exceed the warranty period, our company implements paid maintenance
cause serious injury to the occupants in the car.
services.
● Wireless devices may interfere with the flight system of the aircraft. Please abide by the relevant regulations of
the airlines. Do not use this device in places where the use of wireless devices is prohibited.
Data Rates
WIFI
3.return:
Power safety
●
In order to speed up the repair of returned goods, please do not use parcels for mailing, and the
freight must be borne by yourself.
During the product return and replacement period, please keep the packing box and accessories
properly.
● The power plug is used as a device to disconnect the power.
● The power socket should be installed near the equipment and should be easily accessible.
● When the device is not in use, please disconnect the power supply from the device and unplug the power
●
WIFI users
Max 10 concurrent connected users
e refer to the label on the bottom of the CPE of configure account and password
| General | Details |
|---|---|
| Name | FIRSTNUM CPE C1 WiFi Router User Manual |
| Make | FIRSTNUM |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.74 MB |
If you have any questions regarding FIRSTNUM CPE C1 WiFi Router User Manual, please ask here and describe the problem in detail.

FIRSTNUM C600C 4G LTE Broadband Router User Manual

Firstnum C401 CPE Router User Manual















