Home > Hercules > HERCULES HCB043 20V Brushless Compact Router Owner’s Manual

HERCULES HCB043 20V Brushless Compact Router Owner’s Manual

a. Loosen the Edge Guide Wing  
Nut counterclockwise.  
SETUP - BEFORE USE  
b. Slide the Edge Guide to desired working position.  
c. Retighten the Wing Nut to secure the Edge Guide.  
Read the ENTIRE IMPORTANT SAFETY  
INFORMATION section at the beginning of  
this manual including all text under  
5. Align the Edge Guide along the material to be  
routed to cut parallel with the workpiece edge.  
subheadings therein before set up or use  
.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL  
OPERATION: Turn Power “OFF” and remove the  
Battery Pack before performing any procedure in  
this section.  
Assembly  
Edge Guide Installation  
1. Assemble the Edge Guide using the locking screw  
and wing nut with its washer and lock washer.  
Locking Screw  
Note: The Edge Guide may be used for circle  
cutting by turning the Edge Guide over and using the  
center gap in the Edge Guide to follow the circle.  
Edge Guide  
Temporary Guide Installation  
Washer  
Guide Bracket  
A temporary guide can be used to make a straight cut  
which does not parallel the edge of the workpiece.  
Lock Washer  
Wing Nut  
1. Clamp a suitable straight board across the workpiece  
parallel to the desired location of the cut.  
2. Loosen the Guide Locking Knob. The short  
end of the Edge Guide should slide underneath  
the Guide Locking Knob. Align the Edge Guide  
to the mounting position of the Base Plate  
and insert it to the desired working height.  
2. Install the Edge Guide Assembly with the  
Edge Guide facing outward and up. The Wing  
Nut should be installed in the hole furthest  
from the raised edge of the Edge Guide.  
Raised Edge of Parallel Guide  
(Outward and Up)  
Raised Edge of  
Parallel Guide Bracket  
(Attached to Router)  
Guide  
Locking Knob  
Edge Guide  
Depth Adjustment  
Attach Wing Nut  
Edge Guide  
3. Secure the Edge Guide in position by tightening  
the Guide Locking Knob clockwise.  
4. To adjust the Edge Guide:  
Item 59615  
For technical questions, please call 1-888-866-5797.  
Page 7  
GeneralDetails
NameHERCULES HCB043 20V Brushless Compact Router Owner’s Manual
MakeHercules
LanguageEnglish
FiletypePDF (Download)
File size MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding HERCULES HCB043 20V Brushless Compact Router Owner’s Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

5 + 15 =

HERCULES HE041 Variable Speed Fixed Base Router with Plunge Base Kit Owner’s Manual
HERCULES HE041 Variable Speed Fixed Base Router with Plunge Base Kit Owner’s Manual
HERCULES HE042 Compact Trim Router Owner’s Manual
HERCULES HE042 Compact Trim Router Owner’s Manual

HERCULES HCB043 20V Brushless Compact Router Owner’s Manual