Hongdian H8922 3G/4G Router User Guide
4 Panel indicator status
There are 9 working LED indicators on the front side of H8922 4G Router, indicating different status
of system and network, shown as below:
Figure 4-1 Label of the H8922 4G router
Table 4-1 LED indicator description of the H8922 4G router
Indicators
RUN
Status description
On: the system is up and running normally.
Off: the system is not fully started (within 10 seconds of power-on or during
restart).
WAN
On: the WAN port is connected to other devices through the network cable.
Flashing: data transmitting via WAN port.
Off: cable unplugged or the connection with other devices is abnormal.
On: the LAN port is connected to other devices through the network cable.
Flashing: data transmitting via LAN port.
LAN1~4
RF1
Off: cable unplugged or the connection with other devices is abnormal.
On: good signal strength, 21~31.
Quickly flashing (every 0.5s): medium signal strength,11~20.
Slowly flashing (every 2s): poor signal strength, 1~10.
Off: no signal.
RF2
Reserved.
On: modem has connected to 3G/4G network.
Quickly flashing (every 0.5s): modem is dialing.
Slowly flashing (every 2s): modem has connected to 2G/2.5G/2.75G network.
Off: module not found or dialing disabled.
Reserved.
NET1
NET2
WLAN
WPS
On: Wi-Fi is enabled.
Flashing: there is data communication.
Off: Wi-Fi is disabled.
Reserved.
V1.0
Confidential information of Hongdian
Shall not be diffused without permission
5
| General | Details |
|---|---|
| Name | Hongdian H8922 3G/4G Router User Guide |
| Make | Hongdian |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
If you have any questions regarding Hongdian H8922 3G/4G Router User Guide, please ask here and describe the problem in detail.













