Juniper NETWORKS PTX10001-36MR Packet Transport Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

7

Figure 4: Slide Mounꢀng Blades into Mounꢀng Rail  

9. Ensure that the PTX10001-36MR chassis is level by verifying that all the screws on the front of the  

rack are aligned with the screws at the back of the rack.  

To mount the PTX10001-36MR on two posts in a rack by using the two-post mounꢀng kit that you  

purchased separately:  

1. Wrap and fasten the ESD grounding strap to your bare wrist and an connect the other end of the  

strap to the ESD point on the device.  

2. Decide whether to place the front (port) end or the back (FRU) end of the PTX10001-36MR at the  

front of the rack. Posiꢀon the PTX10001-36MR in such a manner that the AIR OUT labels on  

components are next to the hot aisle.  

3. Align the hooks and the screw holes on the mounꢀng bracket with the screw holes on the side of the  

chassis. See Figure 5 on page 7 to see the proper alignment for the PTX10001-36MR.  

Figure 5: Aꢁach the Two Post Mounꢀng Brackets to the PTX10001-36MR  

4. Aꢁach the mounꢀng bracket to the device using the mounꢀng screws. Tighten the screws.  

5. Repeat Step "3" on page 7 and Step "4" on page 7 on the opposite side of the device.  

6. Have one person grasp both sides of the device, liſt it, and posiꢀon it in the rack so that the bracket is  

aligned with the rack holes.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Juniper NETWORKS PTX10001-36MR Packet Transport Router User Guide
Make	JUNIPER NETWORKS
Language	English
Filetype	PDF (Download)
File size	0.21 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• JUNIPER NETWORKS

Questions and Answers (0)

If you have any questions regarding Juniper NETWORKS PTX10001-36MR Packet Transport Router User Guide, please ask here and describe the problem in detail.