Kangwei ZLT W304VA PRO WIFI6 Wireless Dual Band Router User Manual

1

2

3

4

5

6

7

8

9

10

11

correctly, pay special attention to some uplink devices with different  

LAN port services, if you can't access the Internet, you can try to  

connect the network cable to other LAN ports of the uplink devices.  

b. Please check whether the Internet access method selected during  

the router's setup is in line with the actual line environment and  

whether the Internet access parameters filled in are correct.  

Q3：How to restore the factory settings of the router?  

Log in to the router management interface, click "Restore Factory  

Configuration" button in System Management - System Settings -  

Restore Factory Configuration page to restore the factory settings of  

the device. Or press and hold the RESET button when the router's  

indicator light is on, and release it when you see the indicator light  

flashing white after 7 seconds, the router will restart automatically  

after restoring the factory settings.  

Q4: Why can't I find the router Wi-Fi signal?  

a. Check whether the wireless network has been turned on, if it is off,  

please turn on the wireless network and retry.  

b. Check whether the configuration information of the superior  

gateway or main router is synchronized, if it is synchronized, you can  

use the Wi-Fi password of the superior gateway or main router to  

access directly.  

c. Only devices that support 5GHz wireless network can search the  

5GHz wireless network name.  

Q5: What should I do if the signal is weak in the corners of my  

home?  

The operation process is very simple, please buy another router of this  

model for the corner with weak signal, refer to the method of router  

network expansion.  

Q6: What should  

I

do if  

I

forget my router's background  

management password?  

After restoring the router to factory settings, log in to the  

management webpage according to the user name and password on  

the nameplate on the back of the router, and configure the router  

again.  

Q7: How many working modes does the router have?  

The router supports three modes of operation: bridging (default),  

routing mode, and relay mode.  

a. Bridge Mode: It can be used with a gateway.  

b. Routing Mode: After the router WAN port is connected to the  

uplink device, you need to select the correct network mode (e.g.,  

PPPoE dial-up mode, dynamically assigned IP mode, static IP mode)  

and configure the corresponding parameters on the router's  

management page before accessing the Internet.  

c. Relay Mode:The router bridges the existing wireless signals to  

extend the wireless network coverage, and the user can customize the  

local wireless network information.  

FCC Statement  

This equipment has been tested and found to comply with the limits  

for a Class B digital device, pursuant to part 15 of the FCC Rules. These  

limits are designed to provide reasonable protection against harmful  

interference in a residential installation. This equipment generates,  

uses and can radiate radio frequency energy and, if not installed and  

used in accordance with the instructions, may cause harmful  

interference to radio communications. However, there is no guarantee  

that interference will not occur in a particular installation. If this  

equipment does cause harmful interference to radio or television  

reception, which can be determined by turning the equipment off and  

on, the user is encouraged to try to correct the interference by one or  

more of the following measures:  

—Reorient or relocate the receiving antenna.  

—Increase the separation between the equipment and receiver.  

—Connect the equipment into an outlet on a circuit different from  

that to which the receiver is connected.  

—Consult the dealer or an experienced radio/TV technician for help.  

FCC Radiation Exposure Statement  

This device complies with FCC radiation exposure limits set forth for  

an uncontrolled environment and it also complies with Part 15 of the  

FCC RF Rules. This equipment must be installed and operated in  

accordance with provided instructions and the antenna(s) used for  

this transmitter must be installed to provide a separation distance of  

at least 25 cm from all persons and must not be co-located or  

operating in conjunction with any other antenna or transmitter.  

End-users and installers must be provided with antenna installation  

instructions and consider removing the no-collocation statement.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Kangwei ZLT W304VA PRO WIFI6 Wireless Dual Band Router User Manual
Make	Kangwei
Language	English
Filetype	PDF (Download)
File size	0.21 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Kangwei

Questions and Answers (0)

If you have any questions regarding Kangwei ZLT W304VA PRO WIFI6 Wireless Dual Band Router User Manual, please ask here and describe the problem in detail.