KEENETIC KN-3911 Mesh Wi-Fi 6 Multi-Gigabit Router User Guide

1

2

• Reorient or relocate the receiving antenna.  

• Increase the separation between the  

equipment and receiver.  

• Connect the equipment into an outlet  

on a circuit different from that to which the  

receiver is connected.  

Can I connect a Keenetic Extender  

Environmental Conditions  

• Operating temperature range: 32 to +104°F;  

• Operating humidity: 20 to 95%  

non-condensing;  

• Storage temperature range: –22 to +158°F;  

• Storage humidity: 10 to 95% non-condensing.  

Management Options  

to a non-Keenetic main router?  

The Keenetic web interface is the primary way  

to manage your device, offering all features  

and configuration options. You can also book  

a private domain name with the free KeenDNS  

service to have secure, HTTPS-protected remote  

management of your network anytime, and from  

anywhere. Open my.keenetic.net to start.  

Absolutely. Press the Wi-Fi Control  

Button D on your Keenetic in Extender Mode.  

Within two minutes, start a WPS session  

on your main router by pressing the appropriate  

button on the Non-Keenetic device. A Keenetic  

Extender will adopt the wireless network name  

and password of the main router. The Status  

LED on the Extender will illuminate green when  

it has connected successfully to your network.  

To configure the repeater settings, first open the  

user interface of the main router to determine  

the IP address assigned to your Keenetic  

Extender. Then, enter that IP address in the  

web browser to open the Web Interface on the  

Keenetic Extender to make necessary changes.  

• Consult the dealer or an experienced radio/  

TV technician for help.  

Safety Instructions  

• Your Keenetic device is ONLY for indoor  

use — NEVER use it outside.  

• Before use, remove protective labels from  

your Keenetic device, and ensure vents are  

unblocked.  

• Never use your Keenetic device  

in an enclosed space, and ensure that the  

Keenetic-supplied power adapter is always  

easily accessible.  

• ONLY use a Keenetic-supplied power  

adapter — cease to use any damaged adapter  

IMMEDIATELY.  

• Your Keenetic device and its power adapter  

contain no user-serviceable parts — DO NOT  

OPEN.  

• Keep your Keenetic device away from water,  

excessive humidity or heat, and direct  

sunlight.  

• Your Keenetic device can be safely  

wall-mounted using two screws, firmly  

attached, on any wall surface strong enough  

to support 4 times the device’s weight.  

The Keenetic mobile application provides the  

easiest way to manage your home network  

through your iOS or Android devices on the go,  

focused on routine tasks, parental functions and  

traffic monitoring. Download the Keenetic app,  

available on Apple App Store and Google Play  

Store, on your mobile phone.  

This device complies with Part 15 of the FCC  

Rules. Operation is subject to the following  

two conditions:  

(1)  

This device may not cause harmful  

interference, and  

(2)  

This device must accept any  

1

interference received, including interference  

that may cause undesired operation.  

Scan for  

Keenetic App  

What should I do if I forget  

my wireless password?  

FCC Caution: Any changes or modifications not  

expressly approved by the party responsible  

for compliance could void the user’s authority  

to operate this equipment.  

The Keenetic remote monitoring and  

management system is a cloud-based  

solution purpose-built for Small/Medium-sized  

businesses to help keep critical networks  

and infrastructure online 24/7. Visit  

rmm.keenetic.com to learn more.  

The default password for connecting to your  

Wi-Fi network can be found on a sticker  

on the back of your Keenetic device, or if you  

are using a Mesh Wi-Fi System, you should  

use the password on the Main Router. If the  

default Wi-Fi password has been changed and  

subsequently lost, the changed password can  

be retrieved or reset by logging in to the web  

interface or in the Keenetic mobile application.  

RF exposure warning  

This equipment complies with FCC  

radiation exposure limits set forth for  

an uncontrolled environment.  

Frequently Asked Questions  

What should I do if I can’t access  

the Initial Setup Wizard page or the  

Keenetic Web Interface page?  

1.Make sure that your mobile device / computer  

is connected to your Keenetic device  

(in Router Mode) via Wi-Fi or an Ethernet cable  

and set up to obtain an IP address and DNS  

servers automatically.  

This equipment complies with FCC radiation  

exposure limits set forth for an uncontrolled  

environment. This equipment must be installed  

and operated in accordance with provided  

instructions and the antenna(s) used for  

this transmitter must be installed to provide  

a separation distance of at least 20cm from  

all persons and must not be collocated  

or operating in conjunction with any other  

antenna or transmitter.  

2

3

4

5 6  

7

What should I do if I can’t add  

Device Warranty  

For the most up to date Warranty Information,  

please visit our website keenetic.com/legal.  

an extender to the Keenetic Mesh  

Wi-Fi System?  

Make sure the Operating Mode Switch on the  

case is set to I B — Extender Mode. If this  

is correct then next restore the factory settings  

of your router (see below), and repeat the  

procedure of adding the extender to the Mesh  

Wi-Fi System.  

Your Keenetic device comes with  

a non-transferable 3-year warranty from the  

documented date of purchase. Valid claims  

in case of a defect will be honored subject  

to local legal requirements.  

Keenetic Challenger SE  

Details  

2.Check that you have correctly entered the  

appropriate Keenetic device web address:  

either my.keenetic.net (recommended)  

or 192.168.1.1 or 192.168.2.1.  

5. Wi-Fi Control Button D  

By default, this button allows you to easily  

add extenders to the Keenetic Mesh  

Wi-Fi System, or other WPS-compliant  

devices to the wireless network.  

Pressing it once — Starts a quick  

connection session for adding a new  

device.  

1. Status LED  

Certification Information  

What should I do if I forget my Web  

Interface page password?  

To create a new password, please follow the  

instructions to restore the factory settings  

on your Keenetic device in the question below.  

Notice  

Blinking green — Starting up or updating  

the operating system.  

3.Reboot your mobile device / computer and  

your Keenetic device.  

When you use your Keenetic device (including  

when you connect your Keenetic device the  

first time), Keenetic Limited will process  

certain personal data about you, e.g.,  

service tag, serial number, model name,  

software version, and IP address of your  

Keenetic device.  

Solid green — Internet connection  

is established.  

Blinking orange — Quick connection  

session (WPS) in progress.  

Solid orange — No Internet connection.  

Off — Off.  

FCC ID 2BFMH-KN-3911  

4.If the Initial Setup Wizard page is still not  

appearing, please follow the instructions  

below to reset your Keenetic device.  

Federal Communications Commission  

(FCC) Interference Statement  

This equipment has been tested and found  

to comply with the limits for a Class B digital  

device, pursuant to Part 15 of the FCC Rules.  

Pressing and holding for 3 seconds —  

Turns the Wi-Fi on or off.  

You can assign other functions to this  

button if necessary.  

How do I reset/restore the  

original factory settings  

on my Keenetic device?  

What should I do if I can’t access the  

Internet with my Keenetic device?  

1.If the Status LED on the Main Router  

is illuminated orange, consult your ISP  

to make sure that that service is available,  

and that you are using the correct connection  

parameters, e.g. account login and password,  

authentication protocol, MAC address, etc.  

Make any necessary changes.  

For more information, please go to  

keenetic.com/legal.  

2. Operating Mode Switch  

A — Router Mode.  

6. Reset Button B  

Make sure that your Keenetic device  

These limits are designed to provide  

reasonable protection against harmful  

interference in a residential installation.  

This equipment generate, uses and can  

radiate radio frequency energy and, if not  

installed and used in accordance with the  

instructions, may cause harmful interference  

to radio communications.  

is connected to a power supply. Press and hold  

the Reset Button B until the Status LED begins  

to blink rapidly, release the button and wait while  

your device restarts.  

Important: After restoring factory settings, you  

will need to reconfigure your Internet connection  

and re-add extenders to your Mesh Wi-Fi System.  

Restores the original factory settings  

and resets the administrator password.  

For instructions on how to reset your  

Keenetic device to factory settings, see the  

Frequently Asked Questions section below.  

B — Extender Mode.  

3. Network Port 0  

The blue port marked 0 is preconfigured  

for Internet connection in Router Mode.  

In Extender Mode, this port works for home  

or office network connection.  

7. DC Power Socket F  

2.If the Status LED on the Main Router  

is illuminated green, please check the wired  

or Wi-Fi connections between your Keenetic  

Main Router and home devices, including any  

Keenetic extenders.  

For use with the power adapter supplied  

in the package. The Keenetic device  

is designed for continuous operation and  

does not need to be powered off daily.  

4. Network Port 1  

However, there is no guarantee that  

interference will not occur in a particular  

installation. If this equipment does cause  

harmful interference to radio or television  

reception, which can be determined  

by turning the equipment off and on, the user  

is encouraged to try to correct the interference  

by one of the following measures:  

By default, this port is intended for home  

devices, but it can be reconfigured and  

connected to the Internet in Router Mode.  

General Information  

What’s in the Box  

• 1 Router/Extender preloaded with KeeneticOS;  

• 1 Level VI energy-efficient 100–240 V power  

adapter;  

• 1 Ethernet cable;  

• 1 Quick Start Guide.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	KEENETIC KN-3911 Mesh Wi-Fi 6 Multi-Gigabit Router User Guide
Make	KEENETIC
Language	English
Filetype	PDF (Download)
File size	0.18 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• KEENETIC

Questions and Answers (0)

If you have any questions regarding KEENETIC KN-3911 Mesh Wi-Fi 6 Multi-Gigabit Router User Guide, please ask here and describe the problem in detail.