Notion R023 LTE CPE Router User Guide
web management page.
Step 3: Setting up a Wi-Fi connection on your client
Method 1: Setting up a Wi-Fi connection manually
1. From your Wi-Fi enabled client, scan for wireless networks in
your area
2. Connect to the network name that matches the SSID found on
the device label
3. When prompted for password, enter the Wi-Fi Key found on the
device label. (The Wi-Fi key is case sensitive.) Your client will notify
you when it is connected.
Method 2: Setting up a Wi-Fi connection through WPS
If the client supports WPS, you can set up a WPS connection as
follows:
1. Ensure that Wi-Fi is enabled on the client
2. Press the WPS button for 3 seconds
3. Activate the WPS connection on the client in 2 minutes
!! For instructions about how to enable a WPS connection on the
client, see the client's user guide.
4．Configuring your device
1. After a client is connected to the device through Wi-Fi or LAN
2. Enter the user name and password to log in to the web
management page. The default user name and password are
printed on the device's bottom label
3. Follow the quick setup wizard to check or set network
connection parameters step by step. For details, see the help
information on the web management page.
To protect your account, change the password after your
first login. For details, see the help information on the web
management page.
If you modify the SSID and Wi-Fi key, you must set up the
Wi-Fi connection on the client again.
Once you are done, try opening a web page on the client to verify
whether you have Internet access.
5．For more help
If you are experiencing any issues with the device,you can:
Restart the device.
See the help information on the web management page.
Restore the device to its factory settings.
Contact your service provider.
！！Figures in this guide are for your reference only. Specific models
may vary slightly, contact your service provider for more detailed
information.
6．Safety information
This section contains important information about the operation
of your device. It also contains information about how to use the
device safely. Read this information carefully before using your
device.
Electronic device
Do not use your device if using the device is prohibited. otherwise
it will causes danger or interference with other electronic devices.
Interference with medical equipment
Follow rules and regulations set forth by hospitals and
health care facilities. Do not use your device where
prohibited.
Some wireless devices may affect the performance of
hearing aids or pacemakers. Consult your service provider
for more information.
Pacemaker manufacturers recommend that a minimum
distance of 15 cm be maintained between a device and a
pacemaker to prevent potential interference with the
pacemaker. If using a pacemaker, hold the device on the
side opposite the pacemaker and do not carry the device
in your front pocket.
Areas with flammables and explosives
Do not use the device where flammables or explosives are
stored (in a gas station, oil depot, or chemical plant, for
example). Using your device in these environments
increases the risk of explosion or fire. In addition, follow
the instructions indicated in text or symbols.
Do not store or transport the device in containers with
flammable liquids, gases, or explosives.
Operating environment
Avoid dusty, damp, or dirty environments. Avoid magnetic
fields. Using the device in these environments may result
in circuit malfunctions.
Before connecting and disconnecting cables, stop using
the device and disconnect it from the power supply.
Ensure that your hands are dry during operation.
Place the device on a stable surface.
Keep the device away from electronic appliances that
generate strong magnetic or electric fields, such as a
microwave oven or refrigerator.
During thunderstorms, power off your device and remove
all cables connected to it to protect against lightning
strikes.
Do not use your device during thunderstorms to protect
your device against any danger caused by lightning.
Ideal operating temperatures are 0°C to +40°C. Ideal
storage temperatures are -10°C to +60°C. Extreme heat or
cold may damage your device or accessories.
Keep the device and accessories in a well-ventilated and
cool area away from direct sunlight. Do not enclose or
cover your device with towels or other objects.Do not
place the device in a container with poor heat dissipation,
such as a box or bag.
To protect your device or accessories from fire or electrical
shock hazards, avoid rain and moisture.
Keep the device away from sources of heat and fire, such
as a heater, microwave oven, stove, water heater, radiator,
or candle.
Do not place any object, such as a candle or a water
container, on the device. If any foreign object or liquid
enters the device, immediately stop using it, power it off,
and remove all cables connected to it.
Do not block device openings. Reserve a minimum of 10
cm around the device to dissipate heat.
Stop using your device or applications for a while if the
device is overheated. If skin is exposed to an overheated
device for an extended period, low temperature burn
symptoms, such as red spots and darker pigmentation,
may occur.
Do not allow children or pets to bite or suck the device or
accessories. Doing so may result in damage or explosion.
Observe local laws and regulations, and respect the
privacy and legal rights of others.
The device should be installed and operated with a
minimum distance of 20 cm between the radiator and
your body.
Keep the device in a place with good reception. The
distance between the device and other metal materials
(such as metal brackets or metal doors and windows)
should be greater than 25 cm and the distance between
other devices should be greater than 30 cm.
Child's safety
Comply with all precautions with regard to child's safety.
Letting children play with the device or its accessories may
be dangerous. The device includes detachable parts that
may present a choking hazard. Keep away from children.
The device and its accessories are not intended for use by
children. Children should only use the device with adult
supervision.
Accessories
Using an unapproved or incompatible power adaptermay
cause fire, explosion or other hazards.
Choose only accessories approved for use with this model
by the device manufacturer. The use of any other types of
accessories may void the warranty, may violate local
regulations and laws, and may be dangerous.
Power adapter safety
The power plug is intended to serve as a disconnect
device.
For pluggable devices, the socket-outlet shall be installed
near the devices and shall be easily accessible.
Unplug the power adapter from electrical outlets and the
device when not in use.
Do not drop or cause an impact to the power adapter.
If the power cable is damaged (for example, the cord is
exposed or broken), or the plug loosens, stop using it at
once. Continued use may lead to electric shocks, short
circuits, or fire.
Do not touch the power cord with wet hands or pull the
power cord to disconnect the power adapter.
Do not touch the device or the power adapter with wet
hands. Doing so may lead to short circuits, malfunctions,
or electric shocks.
If your power adapter has been exposed to water, other
liquids, or excessive moisture, take it to an authorized
service center for inspection.
Ensure that the power adapter meets the requirements of
Clause 2.5 in IEC60950-1/EN60950-1/UL60950-1 and has
been tested and approved according to national or local
standards.
Cleaning and maintenance
During storage, transportation, and operation of the
device, keep it dry and protect it from collision.
Keep the device and accessories dry. Do not attempt to
dry it with an external heat source, such as a microwave
oven or hair dryer.
Do not expose your device or accessories to extreme heat
or cold. These environments may interfere with proper
function and may lead to fire or explosion.
Avoid collision, which may lead to device malfunctions,
overheating, fire, or explosion.
If the device is not going to be used for an extended
period of time, power it off, and remove all cables
connected to it.
If anything unusual occurs (for example, if the device
emits smoke or any unusual sound or smell), immediately
stop using it, power it off, remove all cables connected to
it, and contact an authorized service center.
Do not trample, pull, or excessively bend any cable. Doing
so may damage the cable, causing the device to
malfunction.
Before you clean or maintain the device, stop using it, stop
all applications, and disconnect all cables connected to it.
Do not use any chemical detergent, powder, or other
chemical agents (such as alcohol and benzene) to clean
the device or accessories. These substances may cause
damage to parts or present a fire hazard. Use a clean, soft,
and dry cloth to clean the device and accessories.
Do not place magnetic stripe cards, such as credit cards
and phone cards, near the device for extended periods of
time. Otherwise the magnetic stripe cards may be
damaged.
Do not dismantle or remanufacture the device and its
accessories. This voids the warranty and releases the
manufacturer from liability for damage.
Environmental protection
The device and its accessories (if included), such as the
power adapter, headsetshould not be disposed of with
household garbage.
Please comply with local laws and regulations regarding
the disposal of this device and its accessories, and support
recycling.
Protection to Fix Card
Customer Name：
Customer Phone：
Purchase Date：
Product Model Number：
Customer Address：
Dealer signature：
User signature：
Warranty terms:
1.Within 7 days from the date of sale, if there is a
performance failure, the product itself and the outer package
must be kept intact (no scratch), and the same type of
product can be replaced (subject to inspection), but the
man-made damage is not included.
2.From the date of sale, the goods will be returned within
seven days, replaced within 15 days and guaranteed for one
year. Except for man-made damage. Accessories are not
covered by the warranty.
3. Warranty service is only valid under normal use.
4.Man made damage, including but not limited to self
dismantling, unsealing, water, liquid, falling, etc. Improper
use and other external damage are not covered by the
warranty. This card must be provided for warranty. If you fail
to provide this card or alter this card without permission. The
company has the right to make non warranty treatment.
RF Spec.
WCDMA
Band 2:
Band 5:
26dBm
Operation Frequency:
Maximum power(Band 2)
Maximum power(Band 5)
23.39dBm
LTE
Operation Frequency:
Band 2:
Band4:
Band 5:
Band 7:
23.48dBm
Maximum power(Band 2)
Maximum power(Band 4)
24.26dBm
| General | Details |
|---|---|
| Name | Notion R023 LTE CPE Router User Guide |
| Make | Notion |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.46 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Notion R023 LTE CPE Router User Guide, please ask here and describe the problem in detail.
Sagemcom FAST 5295 WiFi Router Instructions
KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide
ZYXEL NR2301 NR Portable Router User Guide
D-Link DIR-615 Wireless Router User Manual
ASUS RT-AX53U Dual Band Wi-Fi Router User Guide
GL iNet GL-XE3000NR Puli AX 5G NR Wi-Fi 6 Router User Guide
inhand CR202 Portable 4G Router Installation Guide
TP-Link ER7212PC Omada Gigabit VPN Router with PoE+ Ports and Controller Ability Installation Guide
TP-Link Archer VR600 Wireless DSL Modem Router Installation Guide
accelerated 6300-LX USB Router User Guide