PROCEND M331 Cellular Router Installation Guide
Connecting the Power Supply
Wall Mounting
Powering the M331 Cellular Router is by either a terminal block or a DC
jack.
STEP 1: At the bottom side of the device, use two screws to install each
bracket.
One terminal block is on the front panel.
NOTE:
. Each screw type is flat head M3 x 4 mm.
The power input voltage range is 8 ~ 26 VDC.
STEP 2: Use the screws to attach the bracket of the device for wall
mounting.
NOTE:
One DC Jack is on the front panel.
The power input voltage is 12 VDC.
. These screws are not included in the package. The head of each screw is less
than 7 mm in diameter, the shaft is less than 3 mm in diameter, and the length
is less than 10 mm in diameter.
Antenna Installation
Three SMA connectors placed on the left panel are for connecting to
external LTE and GPS antennas.
. MAIN: for LTE Transmit and Receive
. AUX: for optional LTE Receive for better downstream speed
. GPS: for GPS
Setup
(1) Access the Web Configurator
b. In the login page, enter the default username root and the default
password 2wsx#EDC and then click the Login button.
DIN-rail Mounting
STEP 1: Use the screws to install the DIN-rail kit to attach at the rear side
of the device.
NOTE:
(2) Change Password
. Three screw types are flat head M3 x 5 mm.
Go to the Management -> Administration and enter the desired New
Password and then scroll down the page and click the Apply button.
. Please scan below QR Code to download online resources.
STEP 2: Hook the unit onto the DIN-rail.
STEP 3: Push the bottom of the unit towards the DIN-rail until it locks in
place.
M331
P/N: 604040000077
-2-
| General | Details |
|---|---|
| Name | PROCEND M331 Cellular Router Installation Guide |
| Make | PROCEND |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.33 MB |
If you have any questions regarding PROCEND M331 Cellular Router Installation Guide, please ask here and describe the problem in detail.















