PROSCEND M330 Series Cellular Router Installation Guide
M330 Series Industrial Cellular Router
Quick Installation Guide
LED Indicators of Ethernet Port
Version: 1.00
There is one LED indicator for LAN port and WAN port.
Install the SIM Card
STEP 1: Before inserting or removing the SIM card, ensure that the power
has been turned off, or the power connector has been removed
from the M330 Cellular Router.
LED
Blinking
On
Off
STEP 2: Using a screwdriver to remove the metal protective cover first,
insert the SIM card into the card slot. The cut-off edge of the SIM
card on SIM slot is to the left.
Green
Data Transmitting
LINK UP
LINK DOWN
(Link / ACT)
STEP 3: Push the SIM card and lightly press it to lock into the slot.
STEP 4: Remove the SIM card, lightly press it and it will pop out of the slot.
RS-232 and RS-485 pinouts
NOTE:
. Please use the industrial SIM card operating from -40°C to +105°C to ensure
NOTE:
proper cellular router operation.
. RS-232 and RS-485 share the signal pins “TXD(D+)”, “RXD(D-)” and common ground
pin “GND”.
LED Indicators
RS-232 (Applicable for M330-W)
The following table explains the LED indicators on the front panel.
Pin
TXD
RXD
GND
Signal
Transmit Data
Receive Data
Signal Ground
Direction
Output
LED
FN
Off
On
Slow
Fast
Heartbeat
Input
-
VPN
Internet
connected
Medium
signal
Wi-Fi
Connected
WPS
N/A
Booting
connected
No
Low
High signal
RSSI
signal
Power
down
signal
Processing
RS-485 (Applicable for M330-W5)
Power
up
PWR
N/A
N/A
N/A
Pin
D +
Description
Serial Port, Data+ (A) wire
Serial Port, Data- (B) wire
Signal Ground
D -
WPS and Reset Button
Function
GND
Operation
WPS Processing
Reset
Press the button less than 5 seconds.
Press the button for 5-10 seconds.
Reset to default setting Press the button for more than 10 seconds.
Connecting the Power Supply
Connecting I/O Ports
Powering the M330 Cellular Router is by either terminal block or a DC jack.
V+, V- pints of the terminal block on the front panel.
There are four terminals on the terminal block with two terminals used
for digital input and two terminals used for digital output.
The power input voltage range is 8 ~48VDC.
Pin
DI
Description
Digital Input
DI_GND
DO
DO_GND
One DC Jack is on the right panel.
The power input voltage is 12 VDC.
Digital Output
DI: Low (+0 to +5V) / High (+8 to +40V)
DO: Open Collect (maximum 30V/300mA)
P/N: 604040000083
-1-
| General | Details |
|---|---|
| Name | PROSCEND M330 Series Cellular Router Installation Guide |
| Make | PROSCEND |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.38 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding PROSCEND M330 Series Cellular Router Installation Guide, please ask here and describe the problem in detail.
PROSCEND 850G-6PI 6 Port GbE Managed PoE Switch 5G Cellular Router Installation Guide
PROSCEND M357-5G Cellular Router Installation Guide
xunison D50-5G 5G-LTE Wi-Fi 6 Home Router User Guide
ERICSSON R980-5GD Mobile Router User Manual
JENSEN Air:Link 3000DG Dual Band Router User Manual
Ruijie RG-EG310GH-P-E 10 Port Gigabit Router User Manual
MERCKU M6a Plus WiFi 6 Mesh Router User Guide
NETGEAR PR460X Multi-Gigabit Dual WAN Pro Router Installation Guide
TELTONIKA RUTX12 Dual Cat 6 Cellular Router Owner’s Manual
Prana Air Ambient Lite GSM Router Instruction Manual
TP-Link Archer AX72 AX5400 Multi-Gigabit Wi-Fi 6 Router Installation Guide
D-Link DIR-2660 AC2600 Smart Mesh Wifi Router Installation Guide