Queclink WR100 Cellular Router User Manual
Attention:
Software Configuration
6
Please read this manual carefully before use. Any operation not according to this
manual is inappropriate and may cause damage to the router.
Please pay attention to the following items for daily maintenance:
1. Keep the router ventilated and dry, do not stack other items around the router,
and keep the router away from heat sources, dust and strong magnetic field.
2. Ensure that the router will not be wet or damaged when used indoors or
outdoors.
LOGN
Quick Start -WR100
3. To ensure the insulation between the router and the contact object, it is not
allowed to contact the charged object with the router.
1. Configure the IP Address of your PC. Obtain an IP address automatically or
configure a static IP address manually within the same subnet of the router.
(2) Go to the Status->Network->Mobile page to check the mobile connection status
and signal strength of the network. To maximize the cellular performance, you can try
adjusting the antennas or changing the location of the router to achieve the best signal
coverage.
4. Do not drop, hit or shake the router. Do not use the router under extreme
vibrating conditions.
2. Attach the external antenna to the router's connector and twist tightly. The connec-
tor of mobile is SMA and Wi-Fi is RP-SMA. Make sure that the antenna type
corresponds to the antenna connector.
2. Login the router:
(1) Open a web browser such as Internet Explorer, Google Chrome or Firefox on
your PC.
5. Do not open and disassemble the router without the guidance of our service
engineer.
3. Connect your PC with the router through Wi-Fi or use an Ethernet cable via LAN
port.
If the mobile connection state is connected, it means the router is connected to the
mobile network and you can access the Internet through the router.
(3) Enter username and password to login the Web UI. The default username is
“admin” and password is “admin01”.
4.The Remote Management System (RMS) is a platform to remotely monitor and
manage Queclink networking devices. The system allows to securely gather device
information, change device configuration and upgrade firmware, etc. Visit RMS
website rms.queclinksz.com and register an account to manage your devices.
4. Connect the power adaptor to the socket on the front of the router and plug the
other end of the power adaptor into a power outlet. The router is designed to accept
input voltage between 8 VDC to 32 VDC. Higher voltage input may damage the
device.
3. Wizard Setup
(1) After login, the router will display the overview page. You can go to the System
->Step Wizard page to setup some of the router's basic operating parameters.
Tel: +86 21 5108 2965
Fax: +86 21 54451990
Email: sales@queclink.com
Address:No.30, Hongqiao Wanchuang Center Phase I, Lane 500, Xinlong Road, Minhang District, Shanghai,
China 201101
| General | Details |
|---|---|
| Name | Queclink WR100 Cellular Router User Manual |
| Make | Queclink |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.29 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Queclink WR100 Cellular Router User Manual, please ask here and describe the problem in detail.
NETGEAR M5 Nighthawk 5G Mobile Router User Guide
ZTE MC801A 5G WiFi CPE Router User Manual
TP-Link BE5000 Dual-Band Wi-Fi 7 Router Installation Guide
COBALT WAVE RTR-64×64 Router User Manual
ALTIUS Machine 4G Wireless Router User Manual
intwine connected ICG-150 Gateway 150 Cellular Router User Guide
TP-Link T120200-2B1 Gigabit VPN Router Instructions
KAON BROADBAND AR1840 WiFi Router Installation Guide
TP-Link TL-WR940N Wireless N Router Installation Guide
TELTONIKA RUTX11 CAT6 Cellular IoT Router User Guide