ReadyNet AX1500M WiFi6 Wireless Router User Guide
Product Introduction
Quick Configuration
LED Indicators
Device Interface
Quick Installation
To configure Internet access parameters or modify more
settings, perform the following operations:
LED Layout
Thank you for using the WiFi6 Wireless Router.
This manual will introduce the operation, configu-
ration steps, FAQ and other relevant information
related to this product.
1. Connect the power adapter. According to status of LED,
judge whether the router is started normally.
2. Connect the WAN port to ONU or public network.
3. Connect the internet-based devices.
1.The Internet access device connects to the WiFi6 router
through WLAN or Ethernet cable (LAN port);
WiFi6 Wireless Router
AX1500M
2.Open the Web browser, enter“192.168.11.1”in the
Way Ⅰ：Devices can connect to the router through WLAN,
please check the SSID and WiFi KEY on the nameplate.
Way Ⅱ：Devices can connect to the LAN port of router
through wired ethernet.
address bar, and press Enter. Log in the Web management
interface.
Name: WiFi6 Wireless Router
Model: AX1500M
The default account is“admin”and password is“system”;
WPS
Physical Interface: WANx 1
LAN x X3
Power
System
5G WiFi
2.4G WiFi
Internet
3. To Modify the default WiF Settings. You can modify the
SSID and password on the WLAN configuration page;
Quick Start Guide
LAN Port
The Status of LED Indicators
Power port x 1
4. If the WAN port of the WiFi6 router is connected to the
network port of the in-home broadband (optical modem),
you need to set Internet access parameters in the WAN
interface. For detail Internet parameters, please consult the
broadband operator.
LED Name Color
Status
Identification
Light: The device is powered on normally
Temperature: Operating -10°C-+45°C
Storage -40°C-+70°C
Humidity: 5%-95%
Power
Green
Green
Black: The device is powered off
Light: LAN port is connected, but no communication
Flash: Communicating
LAN Port
Black: No connection
Light: 5GHz WiFi on
Button
5G WiFi
Green
Green
Black: 5GHz WiFi off
Name
Operation
Description
Power Supply: DC 12V/1A
Light: 2.4GHz WiFi on
4. Configure the WAN parameter, please follow the "quick
configuration" in chapter 5.
2.4G WiFi
Press 3s
Press 5s
Press
Turn on 2.4GHz and 5GHz WiFi WPS
Black: 2.4GHz WiFi off
Packing List: Router X1, Power Adapter X1
Light: WAN port is connected, but no communication
Flash: Communicating
Restore the factory default configuration
Power on/off
Internet
Green
Ethernet Cable X1, Quick Start Guide X1
Black: No connection
Light: WPS on
WPS
Green
Green
Flash: WPS connecting
Black: WPS funtion is disabled
Light: The system is running normally
Flash: The system is starting
System
7
FAQ
Warranty Card
8
9
Warranty Policy
FCC Warning
Q5. I feel extremely slow speed of accessing the internet?
If the phone or laptops connect to the router through WiFi, please adjust
the location of router according to the signal strength shown in device, and
change the channel/bandwidth of WLAN.
Q1. Login window does not appear, what should I do?
Check if your computer has a fixed IP address. Make sure your
computer's IP is set to "Obtain an IP address automatically".
You can try a different browser.
Please confirm that your lines are connected correctly and the LED light is
displayed normally; Please reboot your personal device and router and try
again.
Dear user:
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
However,there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful inte-
rference to racdio or television reception,which can be determined
by turning the equipment off and on, the user is erncouraged to
try to correct the interference by one or more of the following
measures:
User Information
Thanks for using the product. In order to better serve you,
please read this instruction carefully after purchase and
properly keep this warranty card.we carry out one year quality
guarantee for this product.
Name
This device complies with part 15 of the FCCRules.Operation is
subject to the following two conditions:
Address
Tel
(1)This device may not cause hamful interference,and (2) this
device must accept any interference received ,including interfe-
rerce that may cause undesired operation .
Q2. How do I Reset my router to factory Settings?
When the router is powered on, press and hold the Reset button at the
rear of the device for 5 seconds, then release the button. Please note that the
router's current Settings will be cleared after reset, and it can be used
normally after reset.
Q6. How to connect to the WLAN of router through WPS?
Please make sure that your devices support WPS function.
User instructions:
Purchase Date
Dealer
-Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver -
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
For the following several cases, customer service center will be
appropriate to charge a certain cost of materials or mainte-
nance fees. Please check with the local customer service center
for the specific charges.
Press 3s to open the 2.4G and 5G WiFi WPS of router. In 2 minutes, please
turn on the WPS PBC function in your devices.
Note: This equipment has been tested and foundto comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules.
Product Model
Product SN
You can also log in to the WEB management interface and select the
Restore Factory Settings button.
—Consult the dealer or an experienced radio/ TV technician for help.
Maintenance Record
A.The warranty period of the product has expired.
These limits are designed to provide reasonableprotection agai-
nst harmful interference in a residential installation.This equipm-
ent generates uses and canradiate radio frequency energy and,
if not installed and used in accordance with the instructions,ma-
ycause harmful interference to radio communications.
CC Radiation Exposure Statement:
Maintenance
Detail
Maintenance
Signature
User
Signature
Q3. I forgot the password of the WEB management
interface, what should I do?
Please reset the router to factory settings (Reset). The default account is:
admin and the password is: admin.
Date
B.
Malfunction caused by the user in the course of transporta-
tion, loading and unloading.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment .
C.Malfunction caused by disassembly, modification or
modification of the product without authorization of the
manufacturer.
This transmitter must not be co‐located or operating in conjunction
with any other antenna or transmitter.
Q4. I forgot the wireless connection password, what
should I do?
If you have not changed your wireless connection password, the default
initial password is printed in the nameplate.
If you have changed the wireless connection password, please connect
the router in wired network mode, log in the WEB management interface, and
check and change the password in the wireless network settings.
This equipment should be installed and operated with minimum
distance 20cm between the radiator &you body.
D.Malfunction caused by illegal operation that violate the
method and attention described in the user manual.
E.Malfunction caused by force majeure or other natural factors.
F. If the warranty certificate is inconsistent with the product, or
false record, you will not be responsible for the free service.
1.Dimension after folding(折叠后尺寸)：80*120mm.
2.Print colour(印刷颜色)：colour printing(黑色印刷).
3.Material(材质)：80g paper (80g书纸)
4.Coating(表面处理)：无表面处理
5.Binding process(装订工艺)：Paper folding(折页)——风琴折.
6.Output lpi(输出网线)：200 lpi.
7.Tolerance(公差)：L(长)*W(宽):±1mm.
8.Raw materials and the corresponding post processing should meet requirements defined
in the Environmental Protection Technical Standards.
(原材料及后处理工艺均能满足我司《环保技术标准》要求).
| General | Details |
|---|---|
| Name | ReadyNet AX1500M WiFi6 Wireless Router User Guide |
| Make | ReadyNet |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.32 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ReadyNet AX1500M WiFi6 Wireless Router User Guide, please ask here and describe the problem in detail.
H3C Magic NX30 WLAN Wireless Router User Guide
AKYPACH A2 Wood Router Instruction Manual
LANCOM SYSTEMS 1790VAW GmbH Performance Router User Guide
tehnoteka AX3000 V2 TUF Gaming WiFi Router User Guide
ZYXEL FWA505 Nebula Router User Guide
TANGERINE eero 6+ Router User Guide
Sagemcom SAX2V1S Wave 2 Wireless Router Instruction Manual
robustel R3000 Lite Dual-SIM VPN Router User Manual
inhand IR305 LTE Router Instruction Manual
ZYXEL LTE3301-PLUS 4G LTE-A Router User Guide