Sagemcom Fast 5298 Fiber Wireless Router User Guide
Safety and Certifications
Important Information about the Sagemcom “Fast 5298” :
Installation and Safe Usage Instructions:
1. Place the router in a vertical orientation on a flat surface.
2. Connect the manufacturer supplied AC to DC power adapter. The Fast 5298 requires the use of a 12VDC, 1.5A
power adapter. Only use a manufacturer supplied and approved power adapter, power cord and Ethernet cable.
3. Connect the “Fast 5298” to the AC Mains in accordance with the installation instructions in this booklet, and the
markings on the identification label (voltage, current, and frequency of electricity network).
4. For connection of a computer with an Ethernet cable use one of the RJ45 ports on the product marked "1", "2".
Then connect the other end of the Ethernet Cable to the Ethernet port of a computer. Repeat as necessary with
the other available Ethernet ports.
5. It is not allowed to connect to public cable distribution or cable television network.
When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric
shock, and injury to persons including the following:
1. Do not use this product near water and avoid contact with moisture. For example, does not use near a bathtub,
wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Care should be taken so that
liquids are not spilled on this equipment.
2. This equipment is for indoor use only, do not place or install in an outdoor location.
3. Place your product on a firm, solid surface, no obstacle at a minimum distance of 46cm. If you put it on
something unsteady, it may fall and be damaged. If you place it on a soft surface, such as rug, sofa or cushion,
the vents may be blocked, causing the product to overheat.
4. Never insert objects into the vents of this equipment as this can result in the risk of electrical shock or fire.
5. As the power adapter is the only way to connect to the electrical network, the product must be installed near an
easily accessed power outlet.
6. This equipment should only be operated with the type of power supply (Voltage and Current) indicated on the
marking label.
7. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or electrical shock.
8. Avoid blocking any vent openings or exhaust exits on this equipment. Do not place equipment in a built-in
installation such as a cabinet that may impede the flow of air through the ventilation openings.
9. The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other
heat producing appliances and equipment.
10. Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on or pinched by
items placed upon or next to it.
11. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning only.
12. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do not disassemble this
equipment. If service is required, disconnect all power from the equipment and consult qualified service
personnel.
13. To disconnect this equipment from AC power, unplug the power supply from the AC wall socket.
14. It is not allowed to connect to public cable distribution or cable television network.
15. Use the product in the environment specified as below:
-
-
-
Air temperature between 0°C (32 F) and +45° C (113 F).
Relative humidity between 20% and 90%.
Altitude: 3000 meters (9842feet) maximum.
16. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation
of this device is permitted in large aircraft while flying above 10,000 feet.
Federal Communications Commission (FCC) Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Modifications:
28 March 28, 2024
1
| General | Details |
|---|---|
| Name | Sagemcom Fast 5298 Fiber Wireless Router User Guide |
| Make | Sagemcom |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.07 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Sagemcom Fast 5298 Fiber Wireless Router User Guide, please ask here and describe the problem in detail.
Sagemcom SAX2V1S Wave 2 Wireless Router Instruction Manual
Sagemcom FAST 5295 WiFi Router Instructions
TP-Link Wireless 4G LTE Telephony Router Installation Guide
FiberHome SR1021FS Wireless Router User Manual
TP-Link TL-WR841N 300Mbps Wireless N Router Installation Guide
Iconnect 7621 WiFi 6 Router User Manual
NEXTIVITY Shield Megafi Wireless Wan Router User Guide
Juniper NETWORKS ACX7024 Cloud Metro Router User Guide
DLink DPN-BE7212GR Wi-Fi 7 Router User Guide
ZYXEL FWA505 5G AX1800 Router User Guide
ZLWL ZR2720N Router User Guide
cradlepoint S5A245A Router User Guide