Home > TUGE Technologies > TUGE TECHNOLOGIES TD20 Global 4G WiFi Router User Guide
TUGE TECHNOLOGIES TD20 Global 4G WiFi Router User Guide
Product Appearance and Interface Description
Product Specification
Steps for Using the Device
Quick Troubleshooting
Safety Precautions
1. Do not disassemble the device by yourself.
2. Do not subject the unit and its accessories to strong shocks or vibrations that could damage or cause
combustion or explosion.
3. Do not use strong chemicals, cleaning agents and strong detergents to clean equipment and
accessories.
Side button
Step 1: Turn on the device
1.WiFi device can’t be powered on / off
SIM card Cable
Colour
Black
Press and hold for 10 seconds to reset
the device.
slot
socket
1.1 Plug in the power supply to start the device.
① Please check, use the normal working charging cable and charging plug, and supply
power for a period of time before trying to re-power on. Please check the charging port for
any looseness or other abnormalities.
Dimensions
62mm×62mm×13mm
1.2 (Optional) Press the side button to display the“Purchase Package”QR code.
1.3 (Optional) Scan the QR code with your cell phone to access the eShop.
Short press to toggle screen content.
Global 4G WiFi Router TD20
Weight
< 60 g (Excluding cables, chargers, etc.)
4. To clean the device, please turn off and disconnect the device from the charging cable first.
5. When the power supply is used up or not in use, disconnect from the device and unplug the charger
from the power outlet. Do not place the battery or the device around heating devices such as
microwave ovens, ovens, etc.
6. If there is any abnormal phenomenon such as abnormal heat during the storage of the equipment,
please stop using it.Do not continue to use the charger if the power cord is damaged.Do not throw the
device into fire.Do not replace the device parts by yourself.
7. Please comply with local laws regarding the disposal of electronic device, batteries and accessories,
and support recycling initiatives. Do not dispose of the unit and its accessories as ordinary household
waste.
② Please make sure that the side keys are not loose or obviously damaged, if there is any
abnormality, please return to the test processing.
SIM card slot
Screen
1.4 inch
Step2: Purchase data package(optional)
In the off state, you can insert your
nano SIM card(4FF) for use.
2.1 Open the mall and scan the QR code binding device again.
Supply Voltage
Power Consumption
Working Temperature
Working Humidity
DC5V(3 options: Type-A , Type-C , USB charger)
③ After confirming the above is to use undamaged charging cable and charging plug, the
device can’t be charged, the device may be in water or hardware abnormalities, please
return for testing and repairing.
User Guide
2.2 After purchasing a traffic plan, restart the device for the new traffic plan to take effect.
Insert the card pin into the small hole
on SIM card holder to remove the card
holder from device,put the SIM card in
the holder, and then load the SIM card
holder into the device.
< 1.5W
Step3: Connect to WiFi hotspot
‒10 °C ~ + 55 °C
� 90%
3.1 Press the side button to display the“SSID,PWD”information page of WiFi, set the SSID
and password of WiFi connection in the settings of your cell phone or computer, and
connect to WiFi.
2.The WiFi terminal cannot access internet
lanyard
hole
Side
button
① Turn the device off and on again, when the 4G appears on the upper left corner of the
screen, then reconnect to the WiFi to use the network.
This device supports vSIM technology,
which can be used without inserting a
physical SIM card. To use vSIM, you
need to purchase a package from an
SP (Service Provider).
FDD:B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B17/B18/B19/B20/
B25/B26/B28AB/B66
TDD:B34/B38/B39/B40/B41
Supported Network
Formats and Frequency
Bands
3.2 If your phone supports scanning QR code to connect to WiFi, you can press the side
button and the screen will display the“Set-WiFi”QR code, then use your phone's camera
to scan the QR code to establish a WiFi connection.
② Check the network signal strength indicator in the upper left corner of the device screen,
and when it indicates a weak network signal, please change the device location and try
again.
Name and Element of the Toxic and Harmful Substances or Elements in the Products
Screen
3G:B1/B2/B4/B5/B8
Harmful substances
4G Speed
Max DL 150Mbps/UL 50Mbps
Cable socket
Plumbum Mercury Cadmium Hexavalent
chromium
Polybrominated Polybrominated
biphenyls
(PBB)
Reset hole
Name of part
Note: If you have purchased a data package at the same time as the device, you can
only perform step 1.1 to turn on the device and perform step 3 to connect WiFi, you
can access the internet then.
Biphenyl Ether
(PBDE)
3.WiFi network detected but unable to connect to the network
Charge your device by connecting the
charging plug via the Tye-C USB cable.
WiFi
WiFi6(802.11b/g/n/ac/ax)2.4G
Max 16 concurrent connected users
+
(Cr6
)
(Pb) (Hg)
(Cd)
Please check if the WiFi SSID, Password are set correctly.
WiFi Hotspot Sharing
Wireless data
terminals
○
○
○
○
○
○
○
○
○
○
Screen
4.Device’s WiFi cannot be detected
Display network status, traffic usage,
WiFi SSID and password, etc.
Notes:
Accessories
○
○
① Please turn off the smart WiFi connection function of the mobile terminal, or you are
advised to use another mobile terminal to try to search.
Step4: Check usage of data package
① The charging ambient temperature is between 0°C -45°C. Charging in high temperature, humid or fire
risk environments should be avoided.
This Table is formulated in line with the SJ/T 11364.
○
When not operating the device, the
screen will go off automatically after
15 seconds, short press the power
button to light up/off the screen.
To check usage, press the side button to display the usage information on the screen.
Indicates that the content of this hazardous substance in all homogeneous materials of this
component is below the limit prescribed in GB/T 26572.
② Check whether the WiFi icon is displayed on the screen, if it is not displayed, restart or
reset to try to recover, if it cannot be recovered, return to the detection process.
③ If it still cannot be restored, please contact customer service.
② Store the unit in a dry, well-ventilated environment when it is not in use.
③ It is normal for the equipment to be hot when used, and the equipment can be placed in a cool and
ventilated place to cool down accordingly.
Step 5: Modify WiFi SSID , Password (optional)
Indicates that the content of this hazardous substance in
component at least exceeds the limit prescribed in GB/T 26572.
a
homogeneous material of this
×
If you need to modify the SSID, Password of WiFi , your mobile phone or computer need to
access the devices' WiFi hotspot, then login 192.168.100.1 with web browser . The default
login user name: admin,default login password:admin.
Reset hole
Disclaimer:
Please be aware that if you do not use the device in accordance with this User Guide, we assume no
responsibility
The charger should be unplugged when the power supply is finished or has not been used for a
long period of time, so as to avoid safety hazards caused by prolonged continuous power supply.
5.Network is connected but cannot access the internet
Press and hold for more than 5 seconds
to reset and restart the device.
Please contact with customer service.
1
2
3
4
5
| General | Details |
|---|---|
| Name | TUGE TECHNOLOGIES TD20 Global 4G WiFi Router User Guide |
| Make | TUGE Technologies |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.1 MB |
If you have any questions regarding TUGE TECHNOLOGIES TD20 Global 4G WiFi Router User Guide, please ask here and describe the problem in detail.













