WATER WORLD AC1200M Wireless Dual Frequency Router User Guide

1

制作要求  

1.尺寸:90*133mm，公差+/-1mm2.材质:90g双胶纸  

3.印刷:单黑印刷  

4.折叠工艺:风琴折  

5.表面处理:无  

6.量产前需样品承认(此页不需要印刷  

2.One key networking  

product appearance:  

Product installation：  

product list：  

Use the cell phone to set up the router：  

Set up the router using your computer：  

Make sure that the mesh router to be paired is in the restored factory  

setting state. If configured, please restore the factory settings first (how to  

restore the factory settings see FAQ)  

Declaration form of toxic and harmful substances  

1. Connect the router with the phone to the default wireless name (can be  

found on the "Product Specification label" on the bottom of the product).  

1. Open your browser and enter "ywtwifi" in the address bar.com ", login  

management interface, create administrator password, click" OK ".  

assembly  

operative mode  

Often bright  

Slow flashing  

fast blink  

job instruction  

Toxic and harmful substances or elements  

hexavalent  

chromium  

(Cr(VI)  

Part name  

Select the adjacent power outlet (within 3 meters) and power on the other  

mesh router. The system indicator light is always green, after waiting for an  

actual indicator light to become green slow flash. Press the wps / MESH  

button for two routers in two minutes. The router indicator flashes green and  

starts the search for pairing, which is complete when the indicator becomes  

green constant. At this time, the new router joins the MESH network.  

2. After the connection is successful, please open the browser manually and  

enter " ywtwifi. in the address bar.com ", login management interface, enter  

the administrator account / password, click" OK ".  

lead mercury cadmium  

(Pb) (Hg) (Cd)  

Polybrominated  

biphenyl(PBB)  

The PBDE  

PBDE  

Networking success  

Internet failure  

structure  

SSID:  

Ywt-XXXX  

Ywt-XXXX-5G  

①Led lamp  

3. The router will automatically detect the Internet access mode, and please  

set the Internet access parameters according to the actual situation.  

Single-board /  

circuit module  

The WPS or MESH  

networking clock  

If the WAN port is not connected, check whether the WAN □ network  

cable is loose and whether the broadband Modem or cell broadband  

interface is properly connected.  

◆

This device has the wps / mesh button, which can realize "one-click  

interconnection" with any router with YWT with MESH function. Other routers  

connected to the device will acquire all the configuration parameters of the  

device.  

Power adapter  

cable  

4. After the setting is completed, the router can access the Internet normally.  

4. Set the wireless name and wireless password, and click "OK" to complete  

the setting. The router can access the Internet normally.  

appendix  

YWT propose:  

This form is prepared according to the provisions of SJ / T11364.  

Connect power  

◆

If the wireless connection is disconnected, reconnect the network with a  

new wireless name and password.  

If you use the device in public places, please do not open the MESH  

button to ensure information security;  

◆

If you cannot open this page, see the FAQ.  

：It indicates that the content of the harmful substance in all homogeneous  

materials of the component is below the limit requirements specified in GB / T  

26572.  

When the MESH button is not enabled, you can manually connect with  

other routers through the web management page  

2. The router will automatically detect the Internet access mode, and please  

set the Internet access parameters according to the actual situation.  

internet  

Gateway  

Router *1  

：It means that the content of the harmful substance in at least one of the  

homogeneous material of the component exceeds the limit requirements  

specified in GB / T26572.(However, the project will only have a small amount of  

application in stock or processed products, and is undergoing environmental  

protection switching according to the plan, after the switch will meet the above  

provisions.)  

3.Transfer the paired MESH subrouter to the expansion signal and  

reconnect the power case, plug and play without any configuration.  

Network Setting  

Wireless Setting  

After the power supply is connected, the green light flashes and the main  

route is connected. When the indicator light turns green, it is successfully  

connected to the main route, that is, the distributed Wi-Fi network has been built.  

Wireless Setting  

USER丨  

PWD丨  

WAN Acoess Type: PPPOE  

SSID丨YWT-XXXX  

Net cable  

Net cable  

PWD丨  

Username:  

assembly  

use  

◆

If the wireless connection is disconnected, reconnect the network with a  

new wireless name and password.  

Choose the router location reasonably to avoid the long distance  

between the two routers or the excessive obstacles in the middle wall. If  

the subrouter flashes green, please adjust the position of the subrouter.  

Password:  

The appearance of this product parts are using non-toxic and harmless green  

materials manufacturing, containing non-environmental protection substances  

or elements are due to the global technology and process level and cannot  

achieve the environmental protection substances or elements, but the content  

of non-environmental protection content is very small, long-term use will not  

harm to human body, please rest assured to use.  

OK  

Back  

OK  

Use to connect optical fiber broadband Modern  

(optical cat), ADSL broadband Modern (A cat) or  

cell broadband interface.  

The WAN port is used to connect the optical fiber broadband Modern  

(light cat), the ADSL broadband Modern (A cat) or the cell broadband  

interface.  

NEXT  

①WAN joggle  

As the networking configuration method for  

MESH nodes  

Net cable*1  

Power adapter*1 Router parameter*1 QIG *1  

Distributed Wi-Fi networks can enable up to six (1 + 5) routers with YWT  

MESH function to connect at the same time.  

Used to connect computers, set-top boxes and  

other wired devices.  

②LAN1/LAN2/  

LAN3 interface  

The LAN port is used to connect computers, set-top boxes and other  

wired devices.  

4.Subroute indicator light status  

YWT mesh Routers can connect to each other to build distributed Wi-Fi  

1

2

3

◆

If the WAN port is not connected, check whether the WAN port network  

cable is loose and whether the broadband Modem or cell broadband  

interface is connected correctly.  

networks  

Short press 1s to enable WP S/M ESH network, then  

the LED will flash quickly for 2 minutes; long press  

over 5s can restore the router to the factory setting  

operative mode  

job instruction  

③WPS/  

The POWER port is used to connect the matching power adapter  

1.Connect a mesh router to the Internet  

RST button  

Green is always bright The main router is connected and is networked  

◆

Please connect the router to the diagram, and the system indicator light  

is always on. After waiting for about 60 seconds, the system is started  

successfully.  

For configuration steps, refer to Set up a router with a PC or Set up a  

router with a mobile phone  

* The model approval code of radio transmitting equipment is printed on the  

nameplate of the body of the product shell, unpackaged on the prototype  

surface  

④POWER  

3. Set the wireless name and wireless password, and click "OK" to complete  

the setting.  

Green slow flash  

Green flash  

The child router to be paired or failed to network  

The subrouter is pairing with the main route  

For connecting the matching power adapter  

(power interface)  

The platform router serves as the main route for the distributed Wi-Fi  

network, while the other mesh routers are subrouters.  

* Device name: AC1200M Dual-band wireless router  

Product warranty card  

special explanation:  

FCC Radiation Exposure Statement:  

frequently asked questions  

The operator did not provide any parameters  

(The computer doesn't need to use the router  

to access the Internet)  

After-sales service card  

1. The following conditions are not covered by free maintenance. Watward  

Software Technology Co., Ltd. can provide paid services, please note:  

Warranty warranty is limited to the host, packaging and all kinds of connection,  

software products, technical data and other accessories are not within the  

scope of warranty warranty. The warranty period for wireless external antenna  

and optical fiber head components is 3 months.  

DHCP  

Unable to open the router's management interface (ywtwifi.com) how to  

This equipment complies with FCC radiation exposure limits set forth  

for an uncontrolled environment. This equipment should be installed  

and operated with minimum distance 20cm between the radiator &  

your body.  

Product name model  

do?  

1、Product failure or damage caused by failure of installation, use,  

maintenance and storage as required by the instruction manual;  

number:  

If log in through a wired connection  

Please log in to the Router management interface (ywtwifi.com), according  

to the page prompts, as follows:  

Make sure your computer automatically Get IP Address and Get DNS  

Server Address.  

name of user:  

contacts:  

If the equipment performance problem occurs within 15 days after the purchase  

of the product, and the appearance has no scratch, the new product can be  

replaced directly. During the free warranty period, the products shall be tested  

by Waterward Software Technology Co., Ltd. After confirming the fault, the  

defective products with the same model or equivalent performance shall be  

owned by Waterward Software Technology Co., Ltd.; the non-free product  

shall be returned as is.  

2、Has exceeded the warranty period and warranty period;  

The WAN port has no network cable connection: the WAN port network  

cable is loose or not properly connected.  

3、Altering or tearing up the product bar codes without authorization;  

FCC Warning  

Make sure that the computer is connected to the LAN port of the router, and  

that the corresponding indicators of the router and the computer network  

port are on.  

address:  

4、The product bar code or model on the product warranty card is not  

consistent with the product itself;  

This device complies with Part 15 of the FCC Rules. Operation is subject  

to the following two conditions:  

Broadband account or password error: click Route Settings> Internet  

Settings, re-enter the broadband account and password, click save.  

telephone:  

portraiture:  

zip code:  

5、Without the permission of Watward Software Technology Co., Ltd., change  

the inherent setting documents or repair without authorization;  

Please open IE browser, select Tools and Internet Options in the menu bar,  

and then click "Connect-Connect" button to select "Never dial-up", click  

"LAN Settings" to confirm that all options are not checked.  

(1) This device may not cause harmful interference, and (2) this device  

must accept any interference received, including interference that may  

cause undesired operation.  

Network anomaly: the network cable connection error or the network line  

exception. Ensure that the cable is connected correctly with reference to  

the Connect Router section. If the problem is still unsolved, please call the  

technical support hotline 400-8863-400.  

6、Product damage caused by accidental factors or human behavior, such as  

focusing on strong light, input inappropriate voltage, high temperature, water,  

mechanical damage, damage, serious oxidation or rust, etc.;  

When our service organization serves you, please bring the corresponding  

invoice and product warranty card; if you cannot present the above certificate,  

the free warranty period will be calculated from the production date. If the  

product is paid for maintenance, the same performance problem will enjoy a  

free warranty period for three months from the date of repair. Please request  

and keep your repair certificate.  

If logged in via a wireless connection  

Maintenance records:  

Note: This equipment has been tested and found to comply with the limits  

for a Class B digital device, pursuant to part 15 of the FCC Rules. These  

limits are designed to provide reasonable protection against harmful  

interference in a residential installation. This equipment generates, uses  

and can radiate radio frequency energy and, if not installed and used in  

accordance with the instructions, may cause harmful interference to radio  

communications. However, there is no guarantee that interference will  

not occur in a particular installation. If this equipment does cause harmful  

interference to radio or television reception, which can be determined by  

turning the equipment off and on, the user is encouraged to try to correct  

the interference by one or more of the following measures:  

Make sure that the Internet device is connected to the router wireless  

network.  

What about mobile phones, wireless Internet access for tablets and  

laptops?  

7、Damage caused by transportation, loading and unloading on the way of  

repair;  

Try closing and reopen the browser, clearing the browser cache, or  

changing a different browser.  

date  

fault phenomenon  

maintenance man  

Please confirm that your wireless function of your device is in normal  

condition, if the wireless switch is turned on and the wireless signal can be  

searched.  

AC1200M Dual-frequency wireless router  

8、Product failure or damage caused by force majeure such as earthquake,  

fire, flood, lightning strike;  

Products replaced and guaranteed by Watward Software Technology Co., Ltd.  

will enjoy the remaining period of the original commitment warranty plus three  

months warranty period.  

Please try to replace another Internet access device. If the connection is  

wired, you can also try to replace the network cable.  

Quick Installation Guide  

9、Other failure or damage caused by the design, technology, manufacturing,  

quality of the product itself.  

Please confirm that the wireless router is set correctly, and please do not  

use Chinese or special characters.  

Repower the router.  

The mailing fee of the repaired products shall be borne by the sender.  

If the problem still cannot be solved after the above operation, please call  

the technical support hotline 400-8863-400.  

2、Compartable of YWT Products:  

Please confirm that the wireless name selected and the wireless password  

filled in are correct for the wireless connection (note case sensitivity).  

Waterward Software Technology Limited will not be liable for any other commit-  

ments made by the distributor that are not guaranteed by Waterward Software  

Technologies Limited.  

What if the router cannot surf the Internet after the router setup is completed?  

product type  

Commitment policy  

A year for  

service mode  

Customer repair  

If the problem still cannot be solved after the above operation, please  

restore the router to the factory setup or call the technical support hotline  

400-8863-400.  

Make sure that the router's network cable is properly connected as  

described in the Connect the Router.  

—Reorient or relocate the receiving antenna.  

manufacturer: Shenzhen Waterworld Information Co., Ltd.  

Service hotline: 400-882-5299  

Network card, SOHO switch, SOHO router,  

SOHO wireless products, ADSL products,  

PON access products, 3G / 4G / 5G products,  

power line products, mobile power supply,  

chargers  

3. Technical Support and Software Upgrade Services:  

—Increase the separation between the equipment and receiver.  

Before sending the product, please call our technical support hotline:  

400-8863-400 to confirm the product failure.  

Please check that the Internet access mode set in this guide matches your  

actual wiring environment. How to judge the way of Internet access can be  

referred to in the following table:  

How to restore the router to the factory settings?  

—Connect the equipment into an outlet on a circuit different from that to  

which the receiver is connected.  

When powered on, hold the "Reset" button on the rear panel of the router  

after 5s, and the device will be restored after the system indicator flashes.  

Note: The configuration parameters of the router will be completely cleared,  

and the router needs to be reconfigured.  

At the same time, we will immediately publish the developed product drivers  

and the latest version upgrade software on our official website: ywtwifi.com,  

convenient for your free download.  

Third layer network management  

layer network management anti-attack  

security、/ simple network management  

/

second  

—Consult the dealer or an experienced radio/TV technician for help.  

work certificate  

Q.C.Passed  

/

/

The network access parameters provided by  

A year for  

Customer repair  

Customer repair  

corridor switch, enterprise wireless products,  

VPN / high-performance Internet cafe router,  

optical fiber products, print servers, network  

cameras, Ethernet power supply products  

the network operator when the network is  

Internet access  

opened  

4. Within the scope of national laws and regulations, the right of interpretation  

and modification of this commitment belongs to Watward Software Technology  

Co., LTD.  

warn  

NOTE 2: Any changes or modifications to this unit not expressly  

approved by the party responsible for compliance could void the user's  

authority to operate the equipment.  

1. In thunderstorm, please remove the router power supply and all connec-  

tions to avoid lightning damage.  

Production Date (Date):  

surveyor (QC):  

Account number and password  

PPPOE  

2. Keep away from the heat source and keep the ventilation.  

3. In storage, transportation and operation environments, be waterproof.  

4. Use the power adapter included with the router.  

Two years for change  

Network hard disk video recorder  

100 MB / Gigabit non-network  

Shenzhen Waterworld Information Co., Ltd.  

Service hotline: 400-882-5299  

The IP address, subnet mask, gateway, and  

DNS server  

Static IP address  

Three years in exchange Customer repair  

Shenzhen Waterworld Information Co., Ltd.  

Service hotline: 400-882-5299  

5. Place the device on a smooth surface.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	WATER WORLD AC1200M Wireless Dual Frequency Router User Guide
Make	WATER WORLD
Language	English
Filetype	PDF (Download)
File size	0.27 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• WATER WORLD

Questions and Answers (0)

If you have any questions regarding WATER WORLD AC1200M Wireless Dual Frequency Router User Guide, please ask here and describe the problem in detail.