ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide
Start Guide
3. Power
The router requires an external DC power supply. The DC voltage required is between
+9 and +48 V DC. The router has built-in protection against reverse polarity without signaling.
Connect the power supply cable to the PWR connector on the front right panel of the router
(see the figure below) and tighten the locking screws.
4. Ethernet
For an initial configuration made in a web browser, connect a PC by an Ethernet cable to
the default LAN interface, use the ETH0 port; see the figure above. By default, this interface
has the following configuration:
Connector Purpose
ETH0 LAN port (default)
Default Setting
DHCP Server
Connect your PC to this port to get the IP Address: 192.168.1.1
router web interface.
NetMask: 255.255.255.0
QSG-0014-EN, June 23, 2022
5
Released in the Czech Republic
| General | Details |
|---|---|
| Name | ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide |
| Make | Advantech |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.18 MB |
If you have any questions regarding ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide, please ask here and describe the problem in detail.

ADVANTECH ICR-3200 Cellular Router Instruction Manual

ADVANTECH ICR-2531 LTE Router User Manual

advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide

ADVANTECH SL302 SmartStart LTE Router User Manual

ADVANTECH ICR-2431 LTE Router User Manual

ADVANTECH ICR-2041 LTE Router User Manual





















