alhua DH-AX18 Wireless Router User Manual
Configuring the Router
●
●
Port and Indicator
Do not connect the device to two or more kinds of power supplies,
to avoid damage to the device.
3
You can initialize the device and log in to it through the device webpage
and WiLynk app.
Foreword
Important Safeguards and Warnings
This manual introduces the installation, functions and operations of the
DH-AX18 device (hereinafter referred to as "the Device"). Read carefully
before using the device, and keep the manual safe for future reference.
Safety Instructions
The device is a class I electrical appliance. Make sure that the power supply
of the device is connected to a power socket with protective earthing.
To ensure heat dissipation, the gap between the device and the
surrounding area should not be less than 10 cm on the sides and
10 cm on top of the device.
This section introduces content covering the proper handling of the
device, hazard prevention, and prevention of property damage. Read
carefully before using the device, and comply with the guidelines when
using it.
Table 1-1 Indicator description
●
Status
Description
3.1 App Configuration
You can initialize the device and log in to the app to configure the device.
Solid green
Internet access available.
The following signal words might appear in the manual.
●
●
When installing the device, make sure that the power plug and
appliance coupler can be easily reached to cut off power.
Unable to access the Internet. (Router connected, but
network disconnected. )
Solid red
Flashes
●
●
Transport the device under allowed humidity and temperature
For the first time use or after the device is restored to its factory
defaults, you need to initialize the device.
S ignal Words
Meaning
Voltage stabilizer and lightning surge protector are optional depending
on the actual power supply on site and the ambient environment.
conditions. Refer to the technical parameters for requirements on
the transporting temperature and humidity of the device.
Flashes quickly (T=240 ms) for120 s: WPS process.
Flashes slowly (T=2 s) for10 s: Resetting process.
Indicates
a
high potential hazard which, if not avoided, will result in
To protect your device, keep the admin login password safe after
initialization, and change the password regularly.
●
●
death or serious injury.
Operation Requirements
Storage Requirements
For more details on app configuration, go to Me > User Manual
on WiLynk.
Indicates
a
medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
●
Do not disassemble the device without professional instruction.
Connection Diagram
DH-AX18
User’s Manual
●
Store the device under allowed humidity and temperature
3.1.1 Downloading App
●
Indicates
a
potential risk which, if not avoided, could result in property
Operate the device within the rated range of power input and output.
conditions. Refer to the technical parameters for requirements on
the storing temperature and humidity of the device.
Scan the QR code to download the WiLynk app.
Figure 3-1 QR code
Figure 2-1 Connection diagram
●
Make sure that the power supply is correct before use.
damage, data loss, reductions in performance, or unpredictable
●
Make sure the device is powered off before disassembling wires to
avoid personal injury.
results.
Installation Requirements
Connect your device to the
router through wireless.
P rovides methods to help you solve
P rovides additional information as
a
problem or save time.
Connect to modem.
●
Do not unplug the power cord on the side of the device while the
adapter is powered on.
12
3
4 5
a
supplement to the text.
Modem
●
Do not connect the power adapter to the device while the adapter
is powered on.
Ethernet cable
About the Manual
●
●
Connect your device to the
RESET WPS
LAN1 LAN2 LAN3 WAN
DC IN
Socket
Strictly comply with the local electrical safety code and standards.
Make sure the ambient voltage is stable and meets the power
supply requirements of the device.
Use the device under allowed humidity and temperature conditions.
OR
router through Ethernet cable.
●
The manual is for reference only. Slight differences might be found
between the manual and the product.
Connect to Internet port.
●
●
Operating temperature: 0°C–40 °C (32 °F–104 °F)ns.
Power
Network port
Ethernet cable
Do not drop or splash liquid onto the device, and make sure that there
is no object filled with liquid on the device to prevent liquid from
flowing into it.
You can also search for WiLynk at the app store, and then download it.
3.1.2 Registering Accounts
●
●
We are not liable for losses incurred due to operating the product in
ways that are not in compliance with the manual.
●
Personnel working at heights must take all necessary measures to
ensure personal safety including wearing a helmet and safety belts.
Ethernet cable
Ethernet cable
The manual will be updated according to the latest laws and
regulations of related jurisdictions. For detailed information, see
the paper user’s manual, use our CD-ROM, scan the QR code or
visit our official website. The manual is for reference only. Slight
differences might be found between the electronic version and the
paper version.
●
Do not leave outdoor models of the device hanging in the air or
facing outwards when installing onto poles that are on top of
buildings.
●
●
Table 2-1 Rear panel description
Description
Do not block the ventilator of the device with objects, such as a
newspaper, table cloth or curtain.
Procedure
Step
Step
1
2
Open WiLynk, tap Register, and then enter the Register page.
Number
Do not place an open flame on the device, such as a lit candle.
Select the country or region, enter the email address or phone
number, enter the password, and then confirm it.
Reset button. Press and hold the button for more than 5
seconds, and then the router will restore its factory defaults.
1
2
3
Maintenance Requirements
●
●
●
Do not place the device in a place exposed to sunlight or near
heat sources.
●
●
WPS button. Short press for WPS function.
There might be errors in the print or deviations in the description of
the functions, operations and technical data. If there is any doubt or
dispute, we reserve the right of final explanation.
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Phone number is only supported in select countries.
●
LAN port. Connects to wired devices such as computers and
set top boxes.
Do not disassemble it unless necessary.
Power off the device before maintenance.
Address: No. 1399, Binxing Road, Binjiang District, Hangzhou, P. R. China Postcode: 310053
Tel: +86-571-87688888 28933188
Put the device in a well-ventilated place, and do not block its
ventilation.
Step
3
Tap the I have read and agree checkbox.
You can click to view the user service agreement and privacy policy.
●
●
Upgrade the reader software or try other mainstream reader
software if the manual (in PDF format) cannot be opened.
4
5
WAN port. Connects to the modem or Ethernet port.
Power port. Connects to the power supply.
Mark key components on the maintenance circuit diagram with
warning signs.
Use an adapter or cabinet power supply provided by the
manufacturer.
Step
Step
4
5
Click Send.
Enter the verification code, and then click OK.
3.2 Web Configuration
You can initialize the device and log in to it through the device webpage.
Step
8
Enter the WLAN Setting page, set Wi-Fi name, password and
power, and then click Save.
Figure 3-7 Network settings
Figure 3-3 Preparations for adding device
Figure 3-4 Add devices
Figure 3-5 Configure time zone and Wi-Fi network
Figure 3-2 Registration
Figure 3-8 WLAN settings
Procedure
Step
1
The end device connects to the router through wired
and wireless connection. Enter the device domain name
(dahuawifi.com) or device IP(default IP 192.168.10.110) to log in
to the device to configure settings.
Step
Step
2
3
.
Click OK
Select the I have read and agree to the terms of the Software
License Agreement and Privacy Policy checkbox, and then
click OK.
Step
4
For the first-time login,you need to set the login password,and then
click NEXT.
XXXXXX
Step
Step
5
6
Enter the login password, and then enter the web page.
For the first-time login,the device will pop up a setup wizard.
Step
7
WAN settings: You can change the networking method (default
DHCP), click the icons to change, and then click Next.
Figure 3-6 WAN settings
Step
2
3
Scan the QR code on the device, or tap Select Type of the device, and
then enter the SN.
Go to the Wi-Fi settings on your system settings, connect the router
SSID, and then tap Next.
3.1.3 Adding Devices
Prerequisites
Step
Make sure that the device is connected with power and modem. After the
device is powered on, wait for 2 minutes, and then add devices.
Step
Step
Step
Step
4
5
6
7
Configure the login password of the device, and then tap Next.
Configure the networking method of the device, and then tap Next.
Procedure
Wait until the screen prompts Connect to Internet, and then tap Next.
Step
1
●
●
On the Status page, tap Add Device or
on the right-upper corner.
If you can access Internet without any settings on your
bandwidth, select DHCP as the networking method.
If your bandwidth cannot obtain IP address automatically,
contact network administrator or bandwidth service provider,
select Static IP as the networking method, and then enter
Configure the time zone and DST of the device, configure the device
SSID, and then tap Next to finish the configuration.
related information as guided.
If you need to enter the account and password to access
●
Internet, select PPPoE as the networking method, and then enter
bandwidth account and bandwidth password.
| General | Details |
|---|---|
| Name | alhua DH-AX18 Wireless Router User Manual |
| Make | alhua |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.27 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding alhua DH-AX18 Wireless Router User Manual, please ask here and describe the problem in detail.
alhua DH-AC12 Wireless Router User Guide
TP-Link SERCOMM DM1000 Mesh Wi-Fi Router User Guide
cradlepoint R2100 Series 5G Ruggedized Router User Guide
TP-Link WR3002X WiFi 6 Portable Router Installation Guide
TELTONIKA RUTC50 5G Router User Guide
TP-Link Archer AXE75 Gigabit Tri Band Wi-Fi 6E Router Installation Guide
mikroTIK hAP ax lite Wireless Router User Manual
triton TWX7 Router Table Module Instruction Manual
TP-Link BE5000 Dual-Band Wi-Fi 7 Router Installation Guide
xiaomi AX1500 Router User Manual
GLiNet MT6000 Wireless Router User Guide