Home > Beijer > Beijer CloudVPN Gateway Router User Guide

Beijer CloudVPN Gateway Router User Guide

Troubleshooting Front Panel LEDs  
Signal  
Colour  
Description  
Blinking red 1 pulse  
Waiting for internet access  
Blinking red 3 pulses  
Blinking red 4 pulses  
LAN/WAN conflict  
(conflicting subnets)  
Removed from the  
platform (re-insert USB  
flash drive to register  
again)  
Blinking red 5 pulses  
Previously registered to  
the acirro+ remote access  
(remove from the acirro+  
remote access and register  
again)  
Blinking blue 1 pulse  
Blinking blue 2 pulses  
Constant blue  
Connecting to the acirro+  
remote access  
Setting up a VPN  
connection  
Active VPN connection to  
the acirro+ remote access  
Reset To Factory Default Settings  
WARNING  
The following action cannot be undone! All settings will be reset to factory default.  
The CloudVPN Router can be reset to the factory default settings by pressing and holding the reset  
button on top for 5 seconds. The ACT LED will blink while the reset button is pressed. Upon release  
of the button, the ACT LED will rapidly blink if the button was pressed long enough to trigger a reset.  
Wait for the CloudVPN Router to restart. You can then configure the CloudVPN Router again.  
REMOVE PREVIOUS REGISTRATION  
If the CloudVPN Router was previously registered on the acirro+ remote access you’ll  
have to remove it from the acirro+ remote access before you can register it again.  
2024-05  
10  
Beijer Electronics,  
GeneralDetails
NameBeijer CloudVPN Gateway Router User Guide
MakeBeijer
LanguageEnglish
FiletypePDF (Download)
File size0.18 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding Beijer CloudVPN Gateway Router User Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

seventeen + 11 =

Beijer CloudVPN Gateway Router User Guide