Home > BROWAN COMMUNICATIONS INCORPORAT > BROWAN COMMUNICATIONS INCORPORATION MI14 Wi-Fi 6 AX3000 Dual-Radio Router User Guide

BROWAN COMMUNICATIONS INCORPORATION MI14 Wi-Fi 6 AX3000 Dual-Radio Router User Guide

1

Quick Start Guide

Wi-Fi 6 AX3000 Dual-Radio Indoor Router

Model: MI14

Your AP

No.

WAN: For PoE Power IN/data transfer

LAN: For data transfer

Reset

LED Status

Flash Green / Off every second The device is boo�ng up

Flash Red / Oﬀ every second

Steady Green

The device has lost network connec�vity

The device is operated in standalong mode

The device is connec�ng to PrismX

Flash Blue / Oﬀ every second

Steady Blue

The device is operated in cloud mode

Flash Green / Red every second FW upgrading

Accessories

Metal Plate

Moun�ng Bracket

Spring

Washer

Nut

Washer

M3.5 Long Screw

M3.5 Short Screw

Anchor

Installing the Wall Mount

Measure and secure the moun�ng bracket to the wall

with 4 anchors & short screws.

Insert RJ45 cables to WAN/LAN port of MI14.

Turn and secure MI12 to the moun�ng bracket.

Installing the Ceiling Mount with Metal Plate

Measure and drill 4 Φ6mm holes according to the

mounting bracket and attach 4 long screws (not yet

fastened for now).

Fasten the moun�ng bracket with metal plate. Make sure to

apply washers, spring washers, and nuts in order, as below.

Nut

Spring

Washer

Insert RJ45 cables to WAN/LAN port of MI14 then turn

and secure MI14 to the moun�ng bracket.

Accessing the AP’s Se�ngs Menu

1. Conﬁgure your PC’s IP se�ng to DHCP to automa�cally retrieve an IP address.

2. Connect your PC’s Wi-Fi to the SSID printed on the rear of the AP that corresponds to the frequency of

the connec�on (2.4G / 5G) using the password “passphrase”

3. Enter the IP address 192.168.2.1 in your browser.

4. In the PRISM login screen use the following login:

Username: prism

Password: prism

1. Conﬁgure your PC’s IP se�ng to sta�c and then set the IP address to any address from 192.168.19.2 to

192.168.19.250.

2. Connect your PC’s network port to the WAN port on the AP.

3. Enter the IP address 192.168.19.1 in your browser.

4. In the PRISM login screen use the following login:

Username: prism

Password: prism

1. Conﬁgure your PC’s IP se�ng to DHCP to automa�cally retrieve an IP address.

2. Connect your PC’s network port to any of the LAN port on the AP.

3. Enter the IP address 192.168.2.1 in your browser.

4. In the PRISM login screen use the following login:

Username: prism

Password: prism

Worldwide Enterprise Support: +886-3-6006899

Email: sales@prismwiﬁ.com

Manufacturer: Browan Communica�on Inc.

Add.: No.15-1 Zhonghua Road, Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, 30352

Tel.：+886-3-5972970

Regulatory Statements

IC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)

l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter

tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement."

Under Industry Canada regulations, this radio transmitter may only operate using an

antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry

Canada. To reduce potential radio interference to other users, the antenna type and its

gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not

more than that necessary for successful communication.

Selon les règlements d'Industrie Canada, cet émetteur radio ne peut fonctionner qu'à

l'aide d'une antenne d'un type et d'un gain maximal (ou moindre) approuvé pour

l'émetteur par Industrie Canada. Pour réduire les interférences radioélectriques

potentielles avec d'autres utilisateurs, le type d'antenne et son gain doivent être choisis

de telle sorte que la puissance équivalente rayonnée (p.i.r.e.) ne soit pas supérieure à

celle nécessaire pour une communication réussie.

STATEMENT OF RADIATION EXPOSURE:

This equipment complies with the limites of exposure to IC radiation established for an

uncontrolled environment. This equipment must be installed and used with a minimum of

20cm distance between the radiation source and your body.

DÉCLARATION D'EXPOSITION AUX RADIATIONS:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour

un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un

minimum de 20cm de distance entre la source de rayonnement et votre corps.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the

potential for harmful interference to co-channel mobile satellite systems.

les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement

pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux

systèmes de satellites mobiles utilisant les mêmes canaux.

This device complies with CAN ICES-3 (B)/NMB-3(B).

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment .This equipment should be installed and operated with minimum distance 20cm

between the radiator& your body.

Note : This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment gener-

ates,uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help

Declara�on of the Presence Condi�on of the Restricted Substances Marking

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BROWAN COMMUNICATIONS INCORPORATION MI14 Wi-Fi 6 AX3000 Dual-Radio Router User Guide
Make	BROWAN COMMUNICATIONS INCORPORAT
Language	English
Filetype	PDF (Download)
File size	0.85 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Questions and Answers (0)

If you have any questions regarding BROWAN COMMUNICATIONS INCORPORATION MI14 Wi-Fi 6 AX3000 Dual-Radio Router User Guide, please ask here and describe the problem in detail.