Carrier TV-ISO-E2 TruVu Isolated Network Router User Guide

1

2

TruVu Isolated Network Router  

Part Number: TV-ISO-E2  

Specifications  

BACnet Conformance  

Conforms to the BACnet Router (B-RTR) Standard Device and BACnet Broadcast Management Device  

(B-BMD). Tested to and listed to Protocol Revision 19 (135-2016).  

i-Vu Version  

Compatible with i-Vu Version 9.0 or later  

Power Requirements  

24 Vac 10%, 50–60 Hz, 50 VA  

24 Vdc 10%, 18 W  

Communication Ports  

Primary Port: 10/100 BaseT, full duplex, Ethernet ports for BACnet/IP, BACnet/IPv6, BACnet/Ethernet,  

BACnet/SC communication.  

Isolated Port: 10/100 Mbps BaseT, full duplex, Ethernet port for BACnet/IP  

Port S1: High-speed EIA-485 port for communication with BACnet MS/TP network at 9,600 to 115,200 bps  

Port S2: High-speed EIA-485 port for communication with a BACnet MS/TP network at 9,600 to 115,200 bps.  

End of Net termination can be set to Yes to terminate the network segment.  

Service port: USB 2.0 port for setting up the router and troubleshooting through a local connection to a  

computer, connecting to the Equipment Touch, or a wireless service adapter.  

Environmental  

-40 to 158°F (-40 to 70°C), 10–95% relative humidity, non-condensing. The TV-ISO-E2 can be installed both  

inside and outside the building envelope. It should be placed in a UL listed enclosure. If installed outside, the  

enclosure must be suitable for the environmental conditions.  

Operating Range  

LED Status Indicators  

Tricolor NET LED to show network status / Tricolor SYS LED to show system status/POWER LED/S1 EON  

LED/S2 EON LED/A TX (Transmit) and RX (Receive) LED for: Port S1 and Port S2  

Router Addressing  

Memory  

Webserver interface  

8 GBs eMMC Flash memory (120 MB available for use) and 512 MB DDR3 RAM. User data is archived to  

non-volatile Flash memory when parameters are changed, every 90 seconds, and when the firmware is  

deliberately restarted.  

Real Time Clock  

Compliance  

Real-time clock keeps track of time in the event of a power failure for up to 3 days.  

United States: FCC compliant to Title CFR47, Part 15, Subpart B, Class A. UL Listed, File E143900; CCN  

PAZX, UL916, Energy Management Equipment; UL Listed to UL864: Smoke Control System. AS/NZS: RCM  

Mark 61000-6-3; Canada: UL Listed File E143900, CCN PAZX7, CAN/CSA C22.2 No. 205 Signal Equip.,  

Industry Canada Compliant, ICES-003, Class A; UL Listed to ULC-S527: Smoke Control System. Europe/  

UKCA: CEN50491-5-2:2009; Part 5-2: Compliant with Electromagnetic Compatibility Regulations - Gov. UK  

and RoHS for Electrical and Electronic Equipment 2012 RoHS Compliant: 2015/863/EU REACH Compliant  

Protection  

Device is protected by a replaceable, fast acting, 250 Vac, 3A, 5mm x 20mm glass fuse.  

The power and network ports comply with the EMC requirements EN50491-5-2  

Enclosure  

Mounting  

Fire-retardant ABS, UL94-5VA  

35mm DIN rail mounting or screw mounting  

Dimensions  

Overall  

A: 5.51 in. (14 cm)  

D: 5.88 (14.93 cm)  

E: 4.41 (11.20 cm)  

Depth: 2.01 in. (5.11 cm)  

Weight: .75 lbs. (.3402 kg)  

Screw Mounting  

B: 3.00 in. (7.62 cm)  

C: 5.29 in. (13.44 cm)  

For more information, contact  

your local Carrier Controls Expert.  

Controls Expert Locator:  

www.carrier.com/controls-experts  

© Carrier 2025. All Rights Reserved. Cat. No. 11-808-1165-01 06/25  

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs, without notice and  

without incurring obligations. Trademarks are properties of their respective companies and are hereby acknowledged.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Carrier TV-ISO-E2 TruVu Isolated Network Router User Guide
Make	Carrier
Language	English
Filetype	PDF (Download)
File size	0.1 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Carrier

Questions and Answers (0)

If you have any questions regarding Carrier TV-ISO-E2 TruVu Isolated Network Router User Guide, please ask here and describe the problem in detail.