D-Link DBR-700 Router Installation Guide
E
2.5G WAN Port
Connect the Ethernet Cable to the cable or DSL Modem
About This Guide
DBR-700 Default Interface Settings
This guide gives step by step instructions for setting up D-Link DBR-700
Business Router. Please note that the model you have purchased may
appear slightly different from those shown in the illustrations.
F
2.5G SFP
Connect 2.5G SFP module
Ethernet
Interface
Interface
Type
IP Address
Web-Based
Management
DHCP Server
Table 1: DBR-700 Front Panel Descriptions
LAN(1-7)
WAN
Static IP
192.168.10.1 Enabled
Disabled
Enabled
Disabled
Unpacking the Product
DHCP Client 0.0.0.0
Open the shipping carton and carefully unpack its contents. Please consult
the packing list located in following information to make sure all items are
present and undamaged. If any item is missing or damaged, please contact
your local D-Link reseller for replacement.
- One (1) DBR-700 Business Router Appliance
- One (1) 12V/2A Power Adapter
Device Status LEDs and Ethernet Port LEDs
Table 3: Default Interface Settings
Link
TX/RX
Status
Note: D-Link Business Routers only allow Web GUI access from LAN inter-
faces by default for security reason.
Status
- One (1) Ethernet (CAT5e) Cable
- One (1) Rack Bracket
Figure 2. Ethernet RJ-45 Port LEDs
Installing and Connecting the Device
This chapter describes how to connect cables and power to the device.
Quick Installation Guide
Business Router
The device LEDs show information about current device status. When the
device power up, the POWER/STATUS LED will show blinking green during
power on process. Startup takes one minute approximately to complete,
the LED will change to solid green. If you want to turn the device off and on
again, we recommend you wait a few seconds between shutting it down and
powering it back. The Ethernet LEDs show the status of each Ethernet port.
Table 2 lists the name, color, status and description of each device LED.
Product Overview
This chapter provides detailed descriptions of the DBR-700 device and its
components.
Before You Begin
Observe the following precautions to help prevent shutdowns, equipment
failures and injuries:
This document will guide you through the
basic installation process for your new
D-Link Business Router.
- Before installation, always check that the power supply is disconnected
Front Panel
DBR-700
- Ensure that the room in which you operate the device has adequate air
circulation and that the room temperature does Not exceed 40˚C (104˚F)
LED Indicators Color
Right LED
Status
Description
(Link, Speed and Activity)
- Allow 3 inch of clear space to the front and back of the device.
Port 1~8 RJ45
Phone Jack
Green or Amber
Solid Green
A valid 2.5Gbps link is established.
- Do not place the device in an equipment rack frame that blocks the air
vents on the sides of the chassis. Ensure that enclosed racks have fans
and louvered sides.
Blinking Green The port is transmitting or receiving
(NORMAL)
packets at 2.5Gbps.
Solid Amber
A valid 10Mbps, 100Mbps, or
1000Mbps link is established.
- Correct these hazardous conditions before any installation: moist or
wet floors, leaks, ungrounded or frayed power cables, or missing safety
grounds.
Blinking Amber The port is transmitting or receiving
(NORMAL)
A
B
C
D
E
F
packets at 10Mbps, 100Mbps or
1000Mbps.
Figure 1. DBR-700 Front Panel
Off
No link is established.
Embedded
LED Location
Color
Left LED
Status
Description
(Link Status)
Item Feature
Description
A
B
Power /System LED
Reset
Power /System LED: Indicates the DBR-700 is powered on
Reset the device
Port 1~8 RJ45
Phone Jack
Green
Solid Green
When Ethernet Devices is connected
and Link Up.
Off
No link is established.
C
D
Console Port
Console Port
2.5G LAN Port (1 ~7)
Connect Ethernet Devices
Table 2: Device Status LED Descriptions
v1.00(WW) 2024/12/09
| General | Details |
|---|---|
| Name | D-Link DBR-700 Router Installation Guide |
| Make | D-Link |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.25 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding D-Link DBR-700 Router Installation Guide, please ask here and describe the problem in detail.
D-Link BE3600 Mesh Gigabit Wireless Router Installation Guide
D Link DIR-822 AC1200 WiFi Router User Guide
D-Link DIR-2660 AC2600 Mesh Wifi Router Installation Guide
D-Link EXO AX AX1800 Wi-Fi Router User Guide
D-Link N300 4G Router User Guide
D-Link M60 AX6000 Wi-Fi 6 Mesh Router Installation Guide
D-Link AX3200 Router Owner’s Manual
D-Link M30 2-pack Mesh Router User Guide
D-Link M30 AQUILA PRO AI AX3000 Wi-Fi 6 Mesh Router User Manual
D-Link M60 AX6000 WiFi 6 Mesh Router User Guide
ASUS WL500W Wireless Router Instructions
peplink P1234 Wireless Router User Manual
TP-Link AX5400 Multi Gigabit Wi-Fi 6 Router Installation Guide
TRANSLITE GLOBAL TL-HWR-13 Dual Band Wireless Router Owner’s Manual
LTC 1221 4G Wireless Router Installation Guide
TELTONIKA Networks QSG RUT951 Wi-Fi Dual SIM Router Instruction Manual
CHIMA SAX3000 EasyMesh WiFi 6 Router Owner’s Manual
ASUS ET12 ZenWiFi Pro AXE11000 Tri Band Router User Guide
TP-Link TD-W8951ND Wireless DSL Modem Router Installation Guide
DIGITAL DEEP SEA 5G Xtream 5G/4G Router Instruction Manual