FALCON 1800 5G Ready Omni Directional Antenna Plus Router User Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

Step-by-Step Guide for the Antenna Installation  

1. Find a suitable position on the roof of your vehicle. Please  

ensure that you have selected the correct position suitable  

for the hole into the vehicle’s interior and that it is suitable for  

the cable entry and is clear of any obstructions. Cabinets and  

cupboards are usually a preference to ensure a tidy installation.  

2. Drill a pilot hole from the ceiling to the roof.  

3. Drill with a 20mm hole saw just enough to break the surface of  

the ceiling.  

4. Drill from the roof down to get a straight and clean hole. Check  

the hole is straight by drilling one last time from inside  

5. Clean the roof of the vehicle to prepare for the installation of  

the 5G antenna.  

6. Place the router down (with the sticker intact) to ensure it’s  

straight. Remove the 3m sticker paper.  

7. Point the router facing forward by using the grove as your  

guide. Apply a generous amount of adhesive to the neck of the  

thread to prevent any water from getting into the hole.  

8. Drop the cable into the hole.  

9. Apply moderate pressure to get the 3M tape to stick to the roof.  

10. Pass the nut through the cables and thread until it reaches the  

ceiling. Tighten the nut by hand only.  

Step-by-Step Guide for Mounting the Router’s Docking  

Station  

11. The SMA cable from the antenna is 0.5 meters long allowing sufficient  

distance to connect the antenna to the router. Fix the docking station  

with the 2 small screws.  

12. Use the 2-meter 12-volt power cable that comes with the docking  

station. Plug the power plug into the docking station. As the distance  

to the battery may be longer than 2m you will need to extend a cable  

by crimping the cables.  

6

Mount the Falcon router to the docking station  

1. Mount the Falcon router on the Magnet on the docking station.  

2. Plug in the USB power cable from the docking station into the router.  

3. Connect the TS9 pins into the slots of the router.  

Rocker  

Switch  

7

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	FALCON 1800 5G Ready Omni Directional Antenna Plus Router User Manual
Make	Falcon
Language	English
Filetype	PDF (Download)
File size	0.28 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Falcon

Questions and Answers (0)

If you have any questions regarding FALCON 1800 5G Ready Omni Directional Antenna Plus Router User Manual, please ask here and describe the problem in detail.