FESTOOL OF 1400 EB Router User Manual
Vibration emission level (3-axis)
Uncertainty
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise loads
during operation.
ah = 3.5 m/s²
K = 2.0 m/s²
Routing tool diameter
[mm]
10 -25 25 - 40 40 - 60
Adjusting wheel setting
Material
HW
(HSS)
– They represent the primary applications of the
power tool.
Increase possible for other applications, with
other insertion tools or if not maintained adequat-
ely. Take note of idling and downtimes of machine!
Hardwood
Softwood
6 - 4
6 - 5
5 - 3
6 - 3
3 - 1
4 - 1
HSS
(HW)
Chipboard,
coated
6 - 5
6 - 4
3 - 1
2 - 1
6 - 3
5 - 3
2 - 1
1
4 - 2
2 - 1
1
HW
4
Power supply and start-up
The line voltage and frequency must
correspond with the data on the ratings
plate!
Plastic
HW
HSS
(HW)
Aluminium
Plasterboard
1
HW
Switch (1.13) serves as an On/Off switch (I = On/0
= Off). It may be latched with the locking knob on
the side (1.12) for continuous operation. Press-
ing the switch again releases the lock. See Fig.
2 for connection and disconnection of the power
cable.
Constant speed
The pre-selected speed remains constant whether
the machine is in operation or in neutral position.
Temperature control
If the motor temperature becomes too high, the
power supply and speed are reduced. The tool
then only runs with reduced power to enable
rapid cooling by means of the motor ventilation.
After cooling down, the tool accelerates again
automatically.
5
Machine settings
Always remove the power supply plug
from the socket before carrying out any
work on the machine.
5.1
Electronics
Brake (OF 1400 EBQ)
Do not operate the tool if the electronics are faulty
as this can lead to the tool operating at excessive
speeds. If the start-up is not smooth or speed
adjustment is not possible, this indicates that the
electronics are faulty.
The OF 1400 EBQ has an electronic brake which
brings the spindle with tool to a standstill within
approx. 2 seconds of the tool being switched off.
5.2
Changing tools
The OF 1400 EBQ, OF 1400 EQ features
full-wave electronics with the following
properties:
You can turn the machine upside down when
changing the tool.
Smooth start-up
The smooth start-up ensures the router starts
up jolt-free.
a)
- Insert the router into the open clamping collet as
far as possible, but at least up to the mark (
on the router shank. If the collet (3a.2) is not vis-
ible because it is blocked by the union nut (3a.3),
the milling tool (3a.1) must be inserted into the
Inserting the tool
)
Speed adjustment
You can regulate the speed steplessly between
10000 and 22500 min-1 using the adjusting wheel
(1.10). This enables you to optimise the cutting
speed to suit the material:
collet at least far enough that the marker
longer overlaps with the union nut.
no
- Press the switch (1.14) for locking the spindle
on the right-hand side.
- Tighten the locking nut (1.15) with a 24 mm
open-end spanner.
Note: the spindle lock only blocks the motor spin-
dle in one direction of rotation at any one time.
Therefore when the nut is undone or tightened,
14
| General | Details |
|---|---|
| Name | FESTOOL OF 1400 EB Router User Manual |
| Make | FESTOOL |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.61 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding FESTOOL OF 1400 EB Router User Manual, please ask here and describe the problem in detail.
FESTOOL OF 1010 REBQ Electric Handheld Router Instructions
Mercury Netgear D7000 Fibre Modem Router User Guide
TELTONIKA RUT360100100 DIN Rail Router User Guide
TP-Link T120100-2B1 Gigabit VPN Router Instructions
STARLINK Mini Kit Dish With Router User Guide
xiaomi R4AC 4A Mi Router User Manual
Cudy WR3000H AX3000 2.5G Mesh Wi-Fi 6 Router Installation Guide
ARISTA AWE-5510 Wifi Router User Guide
Tenda RX12L WiFi 6 Router Installation Guide
SERCOMM IP5446M WiFi Router User Guide
WEWINS M46Q 5G Mobile Router User Manual