SERCOMM IP5446M WiFi Router User Guide
Chapter 1
Chapter 2
Back Panel
Introduction
Basic Setup
IP5446M
WiFi Router
Package Contents
This chapter provides details on how to setup the IP5446M
This chapter provides details of the IP5446M's featuresand
capabilities.
The following items are included in the box:
1. IP5446M
Front Panel
2. Quick Start Guide
Overview
The IP5446M is a high-performance, full-featured WiFi router with premium
802.11ax, as known as WiFi 6. It is powered by 2.4GHz and 5GHz 4x4 radio.
Wi-Fi 6 routers offer improved speed, capacity, latency, and efficiency, making
them a great choice for homes and offices with multiple devices and high-demand
networking needs.
Faster speeds: Wi-Fi 6 routers provide faster wireless speeds compared to
previous generations. They can achieve multi-gigabit data transfer rates, enabling
smoother streaming, faster downloads, and improved overall network
performance.
Figure 2: Back Panel
1. LAN Ports
1Gbps
Connect to a PC or other Ethernet device using a
standard Ethernet cable.
Features
2.5Gbps WAN port (1*Blue RJ45)
1.0Gbps LAN ports (3*Yellow RJ45)
USB port
Reset Button
WPS Button
(Yellow)
Figure 1: Front Panel
2. WAN Port
2.5Gbps
Connect to a cable modem or PON using a standard
Ethernet cable.
3. Power adapter
4. WiFi credential card
1.Power/WAN
(Green/Red)
Solid Red – No Internet.
(Blue)
Solid Green - Internet connection is available.
12VDC Power Adapter
3. Reset Button
This button is recessed; a pin or paper clip can be used
to press it. The button can be used while the unit is
powered and the power LED is Green.
Blinking Red and Green - FW upgrade in-progress
Off - No power
Wireless
Supports 11ac WiFi: 802.11ac is backwards compatible with 802.11a/b/g/n
Reset to manufacturer default values and
reboot. When pressed and held over 7 seconds,
the settings of the IP5446M will be set to their
default values.
Reboot. When pressed and held over 2 seconds
and less than 5 seconds, the IP5446M will reboot.
2. WiFi/ WPS LED
(Blue/Green)
Solid Green – WiFi enabled
Off – WiFi disabled
WPS Support: WPS (WiFi Protected Setup) simplifies the process of connecting
any device to the wireless network by using the push button on the device
Slow Blinking Blue - WPS is pairing. When WPS button
is pressed, the LED will blink for 2 minutes.
Security Support: WPA2, WPA, and WPA+WPA2 mixed mode are supported for
advanced encryption of all WiFi data
5. Product label
Solid Blue - WPS failure. The LED will stay on for 10
seconds and then turn off.
4.USB Port
Power charging for smart phone or pad.
Fast Blinking Blue-WPS success. The LED will blink
quickly for 10 seconds, then turn off.
5. Power Jack
Find power adapter in the package.
Model: IP5446M
P/N:XXXXXXXXXX
WiFi SSID:LIB-1234567
WiFi Password:1234567890AB
Serial:yymmDQDnnnnnn
Insert the power adapter unit into the power outlet
first. Then connect the power adapter with device
via power connector and power jack.
Quick Start Guide
P/N: 957DVS00SV Document Version: 1.0
Copyright 2023. All Rights Reserved.
42JJ
E210921
FCC ID:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:(1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received,including interference
that may cause undesired operation
Input: 12V
3. LAN LED (Green)
Solid Green – LAN Ethernet cable connected
Off - LAN Ethernet cable is not connected
Blinking Green – Active LAN Ethernet traffic
MAC:1234567890AB
WPS PIN:12345678
HW VER: XXX
Polarity:
Made in China
2.5A
6. WPS Button
Push the WPS button on the router and on your other
WiFi device to perform WPS function that easily
creates an encryption-secured WiFi connection
automatically.
All trademarks and trade names are the properties of their respective
owners
i
1
2
3
ii
| General | Details |
|---|---|
| Name | SERCOMM IP5446M WiFi Router User Guide |
| Make | Sercomm |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.24 MB |
If you have any questions regarding SERCOMM IP5446M WiFi Router User Guide, please ask here and describe the problem in detail.

SERCOMM RP582B Router or Extender User Manual













