HNK Flow AX1501 Dual Band Wi-Fi 6 AX1500 Router User Guide

A0  

初版  

王能  

2024.05.07  

Step3: Select an Internet access mode based on the actual situation and  

Usage safety notice  

The following is the requirements for the correct use of the product. To  

prevent danger and prevent property from being damaged, please read  

carefully and strictly observe it when using it.  

Setup Configuration Wizard  

enter related parameters  

DHCP：  

Step1: Connect your phone to the router's factory default wirelessName  

(you can find it on the product specification label at the bottom of the  

router).  

Operating requirements  

Flow AX1501  

Flow AX1501  

Danger  

It is best that the working ground of the device is not shared with the  

grounding device or lightning protection grounding device of the power  

equipment, and should be as far away as possible.  

●

●

Please use the supporting power supply with the product, and it is strictly  

forbidden to use other non -supporting products. The power supply  

voltage must meet the input voltage range of the special power cor  

Dual-band WiFi6 AX1500 Router  

Flow AX1501  

Notice  

●

This device is only allowed to be used indoors, and it is placed in a dry and  

ventilated place. Please place the device on a stable countertop, otherwise  

once it falls, it will damage the device to the device.  

Quick Start Guide  

Staic：input IP address，mask，gateway，dns  

●

●

During the installation and use of this device, the electrical safety regulations  

of the state and use areas must be strictly complied with.  

Step2: After the connection is successful, open the browser manually and  

PPPoE：input username and password  

When operating this device in wiring, disassembly, etc., please break the  

equipment power supply. Do not operate with power.  

enter 192.168.0.1 in the address box to log in to the management page  

●

●

Please ensure that the work environment of this equipment is cleaned.  

Excessive dust can cause static electrostatic adsorption, which will not only  

affect the life of the equipment, but also cause communication failures.  

Flow AX1501  

Flow AX1501  

The access to the Internet may face network security issues. Please  

strengthen the protection of personal information and data security. When  

you find that the device may have hidden dangers of network security,  

please contact us in time.  

Flow AX1501  

●

Please understand that you have the responsibility to reasonably configure  

all the passwords and other related product security settings, and properly  

keep your username and password.  

Q&A  

Step5: Setting Admin Password，click“Next”  

What can I do if I cannot open the admin interface of my  

router (192.168.0.1)?  

How do I restore router to factory Settings?  

FCC warning:  

Flow AX1501  

In the power-on state, press and hold the "Reset" button on the rear panel  

of the router for more than 10s to release, and all indicator lights will be fully  

lit and turned off.  

This device complies with Part 15 of the FCC rules. Operation is subjected to  

the following two conditions: (1) this device may not cause harmful interference,  

and (2) this device must accept any interference received, including  

If you log in through wired connection  

Flow AX1501  

●

Make sure your computer is "Automatically obtain IP Address" and  

"Automatically Obtain DNS Server Address".  

Note: The router configuration parameters will be cleared after the factory  

Settings are restored. You need to configure the router again.  

Any Changes or modifications not expressly approved by the party responsible  

for compliance could void the user's authority to operate the equipment.  

●

Make sure that the computer is connected to the router's LAN port and  

that the corresponding indicators of the router and computer network ports are on.  

This equipment has been tested and found to comply with the limits for a  

Class B digital device, pursuant to part 15 of the FCC Rules. These limits  

are designed to provide reasonable protection against harmful interference  

in a residential installation. This equipment generates uses and can radiate  

radio frequency energy and, if not installed and used in accordance with the  

instructions, may cause harmful interference to radio communications.  

However, there is no guarantee that interference will not occur in a particular  

installation. If this equipment does cause harmful interference to radio or  

television reception, which can be determined by turning the equipment off  

and on, the user is encouraged to try to correct the interference by one or  

more of the following measures:  

Warnning  

If you log in through WI-FI connection  

Please make sure that the wireless router is correctly set. Do not use Chinese  

or special characters in the wireless name.  

Make sure that the wireless name selected and the wireless password entered  

are correct (case sensitive) when making a wireless connection.  

If the fault persists, restore the router to factory Settings or call the technical  

support hotline.  

●

●

Make sure your Internet device is connected to your router's wireless network.  

Step4: Setting the WI-FI name and password and click "Next"  

Try closing and reopening the browser, clearing the browser cache, or switching  

to a different browser.  

*If the wireless connection is down, reconnect to the network with a new  

wireless name and password.  

●

●

Replace another Internet access device. If the Internet access device is wired,  

you can also replace the network cable.  

-Reorient or relocate the receiving antenna.  

Power on the router again.  

-Increase the separation between the equipment and receiver.  

-Connect the equipment into an outlet on a circuit different from that to which the  

receiver is connected.  

If the fault persists, restore the router to factory Settings or  

call the technical support hotline.  

Flow AX1501  

-Consult the dealer or an experienced radio/TV technician for help.  

This equipment complies with FCC radiation exposure limits set forth for an  

uncontrolled environment. This equipment should be installed and operated  

with minimum distance 20cm between the radiator & your body.  

Flow AX1501-2.4G  

Flow AX1501-5G  

CUSTOMER:  

深 圳 市 迈 腾 电 子 有 限 公 司  

SHENZHEN MTN ELECTRONICS CO.,LTD  

中性  

1.尺寸：成品尺寸：70* 105mm，展开尺寸：350*105MM，公差:±1mm.  

2.材质：70g书纸，左右风琴折，双面黑白印刷.  

TITLE:  

MODEL:  

PART NO.:  

3.环保满足迈腾《MTN-WI-G-010 限用物质管理规范》最新版本要求。  

AX1505  

DRAW  

快速指南  

DATE:  

王能  

2024.05.07  

UNIT’S mm  

VER:  

A0  

1:1  

1/1  

MAT’L  

FINISH  

CHECK  

APPD  

/

/

SCALE  

SHEET  

N/A  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	HNK Flow AX1501 Dual Band Wi-Fi 6 AX1500 Router User Guide
Make	HNK
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• HNK

Questions and Answers (0)

If you have any questions regarding HNK Flow AX1501 Dual Band Wi-Fi 6 AX1500 Router User Guide, please ask here and describe the problem in detail.