HNK RAX1810 Wi-Fi Router User Manual
5.Q: How can
A: Please log in to the management page (IP address is
“192.168.0.1” and click the “Settings>>Internet” In this Interface,
you can choose your connection type.
I
select my connection type?
More Features
III. FAQ
HNK Router App User Guide
Manage the Dual-band feature on the HNK Router App
In addition to some of the settings described above, there are more
functions. Including QOS, Firewall, Port Mapping, Static Route, etc.
service.vip
1.Q: Why can’
t
I
log in to the web UI of the router?
)
.
814ꢀ.&4)
䧗炐愉
A: Step 1: Please confirm that your devices connect to the
HNK-AX1800 router.
Step 2: Please confirm if your IP address is “192.168.0.1”
Step 3: Please confirm both the user name and password is
“admin”
2.Q: How can
.
II. Hardware
.
I
reset the router?
簪愉䅻◾ꢁ辑炐鳀䫙鵠槖
8"/䧗炐愉 簪荈ꢀ篍荈
簪愉ꠇ憭辑炐丘䩺◬◎
A: Method 1: When the power is on, sting the router's "Reset" pin-
hole for 10 seconds to restore the factory settings.
篍荈䅻◾辑炐粠簇䷚꤄仰嫏鳀䫙JOUFSOFU
䅻◾辑炐鳀䫙鵠鲋
-"/䧗炐愉
ꠇ憭辑炐丘䩺◬◎
Method 2: Please log in to the management page (IP address is
挝愅辑炐粠簇┘鵠䡝儔鳀䫙
“192.168.0.1”
tem” then click on “Restore Factory” button to restore the factory
setting.
3.Q: How can
A: Please log in to the management page (IP address is
“192.168.0.1” and click the “Management>>System Admin” In
)
and click the “Management>>System Admin>>Sys-
,
WPS LED
Power LED
Internet LED
LAN LED
5G LED
2.4G LED
I
change my admin password?
㛄⛤㯿
榫◇䕄㛄⮽ⷣ阻糌ն
Quick Installation Guide
)
.
RAX1810 Smart Wi-Fi Router
814ꢀ.&4)䧝꜄
榫◇仰篪阻㚷䒍鵮鳀粠ն
4.As shown are the
options under "Basic
Settings"
5.Select "WiFi Advanced
this interface, you can change the admin password.
4.Q: How to change my network name and password?
1.Login to the HNK
Router App to start
managing your network
2.As shown is the
detailed data of your
network
3.Find "Basic
Configuration" in the
selection menu
1.Download the HNK Router
App and connect to the wifi
network to get started with
Setup Wizard
2.Please select "Dynamic
(DHCP)" for the internet
connection type
3.Set the WiFi name and
Password for the network
4.Please confirm your network
settings and finish setting up
Settings" to start manage
the dual-band feature of
your router
DC in
LAN Ports
WAN Port
WPS Button
Reset
A: Please log in to the management page (IP address is
“192.168.0.1” and click the Settings>>Wireless” In this
)
”
.
Note：Set up the router with the web browser before using the APP to manage your Wifi network
interface, you can change your network name and password.
5
6
17.P6.XXXXXX
7
8
ሷ䶘
↚ᶗ⸷ᢡᨅ
ᇯѰ䗾㞴ᯏਭθṲᕅCODE128θተሮ㓜35*5mmθ ᒬ൞сᯯᱴ⽰ᯏਭθᆍ։Arial 6pt
ᯏਭфሯᓊ
ב
ᓊ㾷ж㠪έ Step 2: Open the configuration wizard page
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
Step 5: Set your device admin password
Step 6: Check out the setting summary and finish initial setting
setting summary will show up to you for checking. If everything is
okay, click on “Next” to finish the initial setting steps.
Dual Band Settings
5.If you want more settings of the dual band, click on “Advance Set
tings” Then the advance settings interface will show on.
I. Set up the new router for internet access
Step 1: Enter the IP address.
Guest Network
If this is the first time using the router, the page will automatically
jump to the configuration wizard page. If the configuration wizard
By default, your new device does not have
a
password configured
A
.
1.Please log in to the management page. The IP address is
1.Please log in to the management page. The IP address is
for administrator access to the Web-based configuration utility. To
secure your new device, please create password below.
operated with minimum distance 20cm between the radiator
&
your body.
1.Launch
a
web browser from
a
computer or mobile device that is
“192.168.0.1”
.
“192.168.0.1”
.
page doesn’
t
show up, you can click the “Settings>>Wizard” for
a
2.Click “Settings>>Wireless” to the wireless setting page.
3.Turn off the “Smart Connect” button, then show on the dual band
settings.
connected to the network.
2.Enter 192.168.0.1 to open
2.Click “Settings>>Wireless>>Guest Zone” to the guest network
setting page.
FCC Warning
your initial setup.
a
login window.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
3.In the Password field, type the password to log into the manage-
ment interface. The default admin password is empty.
3.Configure the settings for your guest, including time limit, internet
resources, 2.4GHz settings.
4.Configure the router 2.4G or 5G Wi-Fi SSID and password.
4.Click on the “Save” button to save your configuration settings.
Then you can separate your network route to your guest.
NOTE 1: This equipment has been tested and found to comply with the limits for
These limits are designed to provide reasonable protection against harmful interference in
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause
a
Class
B
digital device, pursuant to part 15 of the FCC Rules.
a
residential installation. This equipment generates
a
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Step 4: Set up your Wi-Fi
To setup
a
Wi-Fi network you need to give your Wi-Fi network
a
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
name(SSID) and password.
Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
a
Note: The password you entered in this step is not the Wi-Fi pass-
Consult the dealer or an experienced radio/TV technician for help.
Step 3: Configure your internet connection
word, it is the password for the router’
s
management interface. If
6.Click on the “Save” button to save your configuration settings.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authori-
ty to operate the equipment.
Please select your Internet connection type.
you cannot log into the web UI of the router, refer to the Q1 in
FAQ.
Scan to download the HNK Router App or get it on App Store or
Google Play.
HUIZHOU MTN WEIYE TECHNOLOGY DEVELOPMENT CO.,LTD.
Package Contents
24hour Online
Address: NO.2 Huitai Road,Huinan High-tech Industrial Park,Huiao Avenue,Huizhou City,
Guangdong Province,China
Wireless Router
×
×
×
×
1
1
1
1
After-Sales Service
Scan QR Code To Visit
Power Adapter
Quick Installation Guide
Network cable
ሷᓋ
CUSTOMER:
൩ ᐸ 䗾 㞴 ⭫ ᆆ ᴿ 䲆
ޢ
ਮ SHENZHEN MTN ELECTRONICS CO.,LTD
HNK
1.ᡆተሮφ200*145mmθኋᔶተሮφ1000*145θ
ޢ
ᐤf2mm. 2.ᶆ䍞φ105gӐ㊿㓮
3.দ
㾷≸φ㢨দ
TITLE:
MANUAL
MODEL:
PART NO.:
MTO-WR1810AX
4.㻻䇘㾷≸φ 伄⩪ᣎθሷ䶘ሷᓋ൞ཌ
5.ᶆᯏ༺⨼ᐛ㢰ൽ㜳┗䏩ROHS2.0θHFWEEEⲺ㾷≸.
DATE:2022-04-22
зឝ᱄
䛢ᒩ
UNITĆS mm
VER:
A0
1:1
1/1
DRAW
MATĆL
CHECK
APPD
/
/
SCALE
SHEET
FINISH
N/A
| General | Details |
|---|---|
| Name | HNK RAX1810 Wi-Fi Router User Manual |
| Make | HNK |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding HNK RAX1810 Wi-Fi Router User Manual, please ask here and describe the problem in detail.
HNK AX3000 Dual Band Wi-Fi 6 Router User Guide
HNK RAX1810 Smart Wi-Fi Router User Manual
HNK Flow AX1501 Dual Band Wi-Fi 6 AX1500 Router User Guide
D-LINK DWR-978 5G AC2600 Wi-Fi Router User Guide
intelbras WiFiber 121 AC Wi-Force Router User Manual
JUNIPER SSR1400 Session Smart Router User Guide
Antena Gear TX54 5G Cellular Router User Guide
acer 952483 WAVE 7 Wi-Fi Mesh Router User Guide
MIKROTIK 2004-1G-12S+2XS Cloud Core Router User Manual
COOSPO RC905 Router User Manual
Cudy WR1200 Dual Band Wi-Fi Router Installation Guide
MOFI5500 AdvancedHigh Performance Router User Manual
NETGEAR AX6 Stream Wi-Fi Router User Manual