inhand ER815NRQ3 Wlan Edge Router Installation Guide
PC has automatically obtained an IP address, please ensure that your PC and ER815-
NRQ3-WLAN are in the same address range.
If your PC fails to obtain an IP address automatically, please configure it with a static
IP address and the following parameters:
IP Address: 192.168.2.x (Choose an available address within the range of
192.168.2.2 to 192.168.2.254).
Subnet Mask: 255.255.255.0.
Default Gateway: 192.168.2.1.
DNS Servers: 8.8.8.8 (or your ISP's DNS server address)
2.Enter the default device address 192.168.2.1, in the browser's address bar. After
entering the username and password (adm/123456), access the device's web
management interface. If the page shows a security warning, click on the "Hide" or
"Advanced" button and select "Proceed" to continue.
Fig. 4-2-2-a Login the web page
3. Check the network in the “Dashboard〉Interface Status”. The device connects to
the Internet successfully if the “Cellular” or “WAN” icon turns green. Click the
corresponding icon to view interface information such as signal strength, IP
address and traffic consumption.
4. If this device cannot connect to a network, click “Internet〉Uplink Table〉Edit ”
to set up network parameters. The device enables the dial-up function and WAN
by default, please wait for a few minutes to go online, and re-enable the dial-up if
it is not dialed.
| General | Details |
|---|---|
| Name | inhand ER815NRQ3 Wlan Edge Router Installation Guide |
| Make | Inhand |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
If you have any questions regarding inhand ER815NRQ3 Wlan Edge Router Installation Guide, please ask here and describe the problem in detail.

inhand CR202 Portable 4G Router Installation Guide

inhand IR305 LTE Router Instruction Manual













