LUXUL XBR-4500 Epic 4 Multi WAN Gigabit Router Installation Guide

1

2

3

4

5

6

7

8

2^{Connecting Ethernet and Power}  

Before installing the router, test the Internet connection to verify that it  

is functioning properly. Once Internet access is confirmed to be working,  

follow the steps below for installation and configuration.  

Connecting Ethernet  

Luxul recommends Category-5, super Category-5 or Category-6 unshielded  

twisted pair (CAT5/CAT5e/CAT6 UTP). To ensure best performance and  

stable data transmission at 1000 Mbps, use Category-6 shielded twisted pair.  

1. Connect the WAN: Connect the Internet cable from a telco/ISP  

modem/router to the dedicated WAN 1 port on the router.  

2. Connect the LAN: Connect a cable from the dedicated LAN 1 port on  

the router to a switch, access point, or computer.  

For best performance, and to maximize available ports, Luxul recommends  

connecting all LAN devices to a Luxul switch, then connecting that switch  

to the Epic 4 LAN port via a single Ethernet cable.  

n NOTE: WAN 1 and LAN 1-4 are configured by default. The router  

.

must be configured to provide additional WAN ports  

n NOTE: Connect all LAN devices to a Luxul switch, then connect that  

switch to the router for best results.  

Connecting Power  

Use the included power cable to connect the router to a surge-protected  

outlet. The AC input socket and power switch are on the rear panel. The  

built-in power supply supports 100~240VAC at 50/60Hz.  

https://manual-hub.com/  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	LUXUL XBR-4500 Epic 4 Multi WAN Gigabit Router Installation Guide
Make	LUXUL
Language	English
Filetype	PDF (Download)
File size	5.21 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• LUXUL

Questions and Answers (0)

If you have any questions regarding LUXUL XBR-4500 Epic 4 Multi WAN Gigabit Router Installation Guide, please ask here and describe the problem in detail.