LUXUL XBR-4500 Epic 4 Multi WAN Gigabit Router Installation Guide

1

2

3

4

5

6

7

8

Logging In  

To access the router’s web configuration, open your web browser and enter the  

router’s default 192.168.0.1 IP address in the address field. Log in to the router  

using the default user name and password:  

Default IP: 192.168.0.1  

Username: admin  

Password: admin  

Select the menu items on the left to view and/or modify the configuration.  

For information on configuring this router and routers in general, review  

the support resources at luxul.com.  

4 ^{Hardware Operation}  

The front panel of the router features Power, System and USB LEDs, and port  

status indicators for each of the router’s five built-in ports.  

The front panel features five RJ-45 Ethernet ports: A single dedicated WAN  

port, a dedicated LAN port, and three more ports which can  

be configured as either WAN or LAN ports. Using the dedicated WAN port  

along with all three shared WAN/LAN ports, the router can be connected  

to up to four independent Internet connections simultaneously. The front  

panel also features a recessed Reset button and a USB 3.0 port. Plug a USB flash  

drive or hard drive into the USB port and configure the built-in file/DLNA server  

to serve files to LAN-connected devices.  

The rear panel features a power switch and power socket.  

https://manual-hub.com/  

Front Panel  

Reset Button  

The Reset button (located on the front panel) can be used to reset (reboot) the  

switch, or to restore the switch factory default settings.  

X

To Reset the Router: With the router powered on, press and release  

the Reset button.  

c CAUTION: Do not hold the button for more than a second. Doing so  

could erase all settings and restore factory defaults.  

X

To Restore the Default Settings: With the router powered on, press  

and hold the Reset button for 15 seconds, then release the button. The  

switch automatically restores factory default settings. A factory reset may  

take approximately a minute to complete. A successful factory reset is  

indicated by all of the port LEDs flashing once. When the System LED begins  

to flash, the unit is ready.  

c CAUTION: Restoring default settings will remove any/all  

custom configuration.  

https://manual-hub.com/  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	LUXUL XBR-4500 Epic 4 Multi WAN Gigabit Router Installation Guide
Make	LUXUL
Language	English
Filetype	PDF (Download)
File size	5.21 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• LUXUL

Questions and Answers (0)

If you have any questions regarding LUXUL XBR-4500 Epic 4 Multi WAN Gigabit Router Installation Guide, please ask here and describe the problem in detail.