Home > MOXA > MOXA TN-5916 ToughNet NAT Router Installation Guide

MOXA TN-5916 ToughNet NAT Router Installation Guide

Connecting the Relay Outputs  
Each TN-5916 router has two sets of relay outputs—relay output 1 and  
relay output 2.The M12 A-coded 5-pin male connector on the TN-5916  
front panel is used for the two relay outputs. Use a power cord with an  
M12 A-coded 5-pin female connector to connect the relay contacts. You  
can purchase an M12 power cable from Moxa; the model number is  
CBL-M12 (FF5P)/OPEN-100 IP67.  
Pinouts for the TN-5916’s Relay Output Port  
N.C.: Not connected  
FAULT:  
The two sets of relay contacts of the M12 A-coded 5-pin male connector  
are used to detect user-configured events. The two wires attached to the  
fault contacts form an open circuit when a user-configured event is  
triggered. If a user-configured event does not occur, the fault circuit  
remains closed.  
Connecting the Data Lines  
10/100BaseT(X) Ethernet Port Connection  
All TN-5916 models have 16 10/100BaseT(X) Ethernet ports (4-pin  
shielded M12 connector with D coding). The 10/100TX ports located on  
the TN-5916 front panel are used to connect to Ethernet-enabled devices.  
Most users configure these ports for Auto MDI/MDI-X mode, in which case  
the port’s pinouts are adjusted automatically depending on the type of  
Ethernet cable used (straight-through or cross-over), and the type of  
device (NIC-type or HUB/Switch/Router-type) connected to the port.  
In what follows, we give pinouts for both MDI (NIC-type) ports and MDI-X  
(HUB/Switch/Router-type) ports. We also give cable wiring diagrams for  
straight-through and cross-over Ethernet cables.  
10/100BaseT(X) Port Pinouts  
Housing: shield  
- 10 -  
GeneralDetails
NameMOXA TN-5916 ToughNet NAT Router Installation Guide
MakeMOXA
LanguageEnglish
FiletypePDF (Download)
File size1.85 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding MOXA TN-5916 ToughNet NAT Router Installation Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

10 + fourteen =

MOXA EDR-8010-2GSFP Secure Router Installation Guide
MOXA EDR-8010-2GSFP Secure Router Installation Guide
EDR-G9004 Series Moxa Secure Router Installation Guide
EDR-G9004 Series Moxa Secure Router Installation Guide
MOXA TN-4900 Series Gigabit Security Router Owner’s Manual
MOXA TN-4900 Series Gigabit Security Router Owner’s Manual
MOXA TN-4908-WV-CT-T Tough Net Router Installation Guide
MOXA TN-4908-WV-CT-T Tough Net Router Installation Guide
MOXA EDR-810 Secure Router Installation Guide
MOXA EDR-810 Secure Router Installation Guide
MOXA EDR-8010 Series Secure Router Installation Guide
MOXA EDR-8010 Series Secure Router Installation Guide
MOXA G4302-LTE4-US-T Cellular Router Owner’s Manual
MOXA G4302-LTE4-US-T Cellular Router Owner’s Manual

MOXA TN-5916 ToughNet NAT Router Installation Guide