netgate 6100 MAX Secure Router User Manual
CHAPTER
TWO
INPUT AND OUTPUT PORTS
Fig. 1: Rear view of the Netgate 6100 MAX Secure Router
The numbered labels in this image refer to entries in Networking Ports and Other Ports.
2.1 Networking Ports
The WAN1 and WAN2 Combo-Ports are shared ports. Each has an RJ-45 port and an SFP port. Only the RJ-45 or the
SFP connector can be used each port.
Note: Each port, WAN1 and WAN2, is discrete and individual. It is possible to use the RJ-45 connector on one port
and the SFP connector on the other.
Table 1: Netgate 6100 Network Interface Layout
Port Label
Linux Label TNSR Label
Port Type Port Speed
2
3
4
4
5
5
5
5
WAN1 enp2s0f1 GigabitEthernet2/0/1
RJ-45/SFP 1 Gbps
RJ-45/SFP 1 Gbps
WAN2 enp2s0f0
WAN3 enp3s0f0
WAN4 enp3s0f1
LAN1 enp4s0
LAN2 enp5s0
LAN3 enp6s0
LAN4 enp7s0
GigabitEthernet2/0/0
TenGigabitEthernet3/0/0
TenGigabitEthernet3/0/1
SFP
SFP
1/10 Gbps
1/10 Gbps
2.5 Gbps
2.5 Gbps
2.5 Gbps
2.5 Gbps
TwoDotFiveGigabitEthernet4/0/0 RJ-45
TwoDotFiveGigabitEthernet5/0/0 RJ-45
TwoDotFiveGigabitEthernet6/0/0 RJ-45
TwoDotFiveGigabitEthernet7/0/0 RJ-45
Note: The default Host OS Interface is enp2s0f0. The Host OS Interface is one network interface that is only available
to the host OS and not available in TNSR. Though technically optional, the best practice is to have one for accessing
and updating the host OS.
3
| General | Details |
|---|---|
| Name | netgate 6100 MAX Secure Router User Manual |
| Make | netgate |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.22 MB |
If you have any questions regarding netgate 6100 MAX Secure Router User Manual, please ask here and describe the problem in detail.

netgate 8200 Secure Router User Manual

































