Home > NETGEAR > NETGEAR PR460X Multi-Gigabit Dual WAN Pro Router Installation Guide

NETGEAR PR460X Multi-Gigabit Dual WAN Pro Router Installation Guide

10G/Multi-Gigabit Dual WAN Pro Router Model PR460X  
Step 1: Prepare the site  
Before you install the router, make sure that the operating environment meets the site  
requirements that are listed in the following table.  
Table 4. Site requirements  
Characteristics  
Mounting  
Requirements  
Desktop installations. Provide a flat table or shelf.  
Rack-mount installations. Use a 19-inch (48.3-centimeter) EIA standard equipment rack  
that is grounded and physically secure. You also need the rack-mount kit that is supplied  
with the router.  
Access  
Install the router in a position that allows you to access the ports and power connector  
on the back panel and view the LEDs on the front panel.  
Power source  
Use the AC power cable that is supplied with the router. Make sure that the AC outlet in  
which you plug the power cable is not controlled by a wall switch, which can accidentally  
turn off power to the outlet and the router.  
Cabling  
Route cables to avoid sources of electrical noise such as radio transmitters, broadcast  
amplifiers, power lines, and fluorescent lighting fixtures.  
Environmental  
Temperature. Install the router in a dry area with an ambient temperature between 32ºF  
and 104ºF (0ºC and 40ºC). Keep the router away from heat sources such as direct sunlight,  
warm-air exhausts, hot-air vents, and heaters.  
Operating humidity. The maximum relative humidity of the installation location must  
not exceed 90 percent, noncondensing.  
Ventilation. Do not restrict airflow by covering or obstructing air inlets on the sides of  
the router. Keep at least 2 inches (5.08 centimeters) free on all sides for cooling. The room  
or wiring closet in which you install the router must provide adequate airflow.  
Operating conditions. Keep the router at least 6 feet (1.83 meters) away from the nearest  
source of electromagnetic noise, such as a photocopy machine.  
Installation  
23  
Hardware Installation Guide  
GeneralDetails
NameNETGEAR PR460X Multi-Gigabit Dual WAN Pro Router Installation Guide
MakeNETGEAR
LanguageEnglish
FiletypePDF (Download)
File size1.45 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding NETGEAR PR460X Multi-Gigabit Dual WAN Pro Router Installation Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

one − 1 =

NETGEAR RAX40v2 Nighthawk AX4 4-Stream AX3000 WiFi Router User Manual
NETGEAR RAX40v2 Nighthawk AX4 4-Stream AX3000 WiFi Router User Manual
NETGEAR RAX10 AX1800 WiFi 6 Router User Guide
NETGEAR RAX10 AX1800 WiFi 6 Router User Guide
NETGEAR XR1000v2 Nighthawk WiFi 6 Pro Gaming Router User Guide
NETGEAR XR1000v2 Nighthawk WiFi 6 Pro Gaming Router User Guide
NETGEAR PR60X Pro 10G Multi Gigabit Dual WAN Pro Router Installation Guide
NETGEAR PR60X Pro 10G Multi Gigabit Dual WAN Pro Router Installation Guide
NETGEAR AC2600 Wi-Fi Router User Guide
NETGEAR AC2600 Wi-Fi Router User Guide
NETGEAR AX6 Stream Wi-Fi Router User Manual
NETGEAR AX6 Stream Wi-Fi Router User Manual
NETGEAR MR6110 M6 5G WiFi 6 Mobile Router User Manual
NETGEAR MR6110 M6 5G WiFi 6 Mobile Router User Manual
NETGEAR RBR20 Orbi Mesh WiFi Router User Guide
NETGEAR RBR20 Orbi Mesh WiFi Router User Guide
NETGEAR RS280S Nighthawk WiFi 7 Tri-Band Router Owner’s Manual
NETGEAR RS280S Nighthawk WiFi 7 Tri-Band Router Owner’s Manual
NETGEAR BE9200 WiFi 7 Router Instruction Manual
NETGEAR BE9200 WiFi 7 Router Instruction Manual

NETGEAR PR460X Multi-Gigabit Dual WAN Pro Router Installation Guide