×
- 1. Nighthawk Ax4 4-stream Ax3000 Wifi Router Model Rax40v2 Netgear, Inc. 350 E. Plumeria Drive San Jose, Ca 95134, Usa September 2021 202-12100…
- 2. Support And Community (Regulatory And Legal → Trademarks)
- 3. Hardware Setup (Connect To The Network And Access The Router → Specify Your Internet Settings)
- 4. Change The Mtu Size (Enable Access Control To Allow Or Block Access To The Internet → Manage Network Access Control Lists → View Or Change The Wan Settings → Set Up A Default Dmz Server → Use The Wps Wizard For Wifi Connections → Set Up A Guest Wifi Network)
- 5. Deleteastaticroute (Enableordisableimplicitbeamforming → Enableordisablemu-mimo → Update The Router Firmware → Change The Admin Password → Connect To Your Router With Anywhere Access → Share Usb Storage Devices Attached To The Router)
- 6. Access A Storage Device Connected To The Router From A Windows-based Computer (Set Up And Manage Dynamic Dns → Set Up Ftp Access Through The Internet → Set Up A Vpn Connection → Manage Port Forwarding To A Local Server → Add A Custom Port Forwarding Service → Use Vpn To Access Your Internet Service At Home)
- 7. How The Router Implements The Port Forwarding Rule (Port Triggering → Add A Port Triggering Service → Enable Port Triggering → Application Example: Port Triggering For Internet Relay Chat Port Triggering → Factory Settings → Technical Specifications)
- 8. Hardware Setup (Unpack Your Router → Top Panel Leds And Buttons → Rear Panel → Router Label → Position Your Router → Cable Your Router)
- 9. Unpack Your Router (Top Panel Leds And Buttons → Hardware Setup)
- 10. Hardware Setup (Led Descriptions → Power Led → Internet Led → Ethernet Leds For Ports 14 → Usb 3.0 Port Led → Wifi Led)
- 11. Rear Panel (Hardware Setup)
- 12. Router Label (Position Your Router → Hardware Setup)
- 13. Cable Your Router (Hardware Setup)
- 14. Connect The Power Adapter To Your Router And Plug The Power Adapter Into An Outlet. (Press The Power On/off Button On The Rear Panel Of The Router. → Hardware Setup)
- 15. Connectto The Router Network (Typesof Logins → Usea Web Browser To Access The Router → Installand Manage Your Router With The Nighthawk App → Change The Language)
- 16. Connect To The Router Network (Connect To The Router Using A Wired Connection → Connect To The Router Wifi Network → Connect To The Wifi Network Using Wps → Connect To The Network And Access The Router)
- 17. To Use Wps To Connect To The Wifi Network: (Types Of Logins → Use A Web Browser To Access The Router → Automatic Internet Setup)
- 18. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Isp Configuration Information For Your Dsl Account → To Automatically Set Up Your Router → Follow The Onscreen Instructions → If The Browser Does Not Display The Netgear Installation Assistant)
- 19. Log In To The Router (Install And Manage Your Router With The Nighthawk App → Connect To The Network And Access The Router → If The Router Does Not Connect To The Internet, Do The Following: → Review Your Settings → Contact Your Isp To Verify That You Are Using The Correct Configuration Information → Change It To Obtain An Ip Address Automatically From The Router)
- 20. To Install Your Router Using The Nighthawk App: (Change The Language → Connect To The Network And Access The Router)
- 21. Specify Your Internet Settings (Use The Internet Setup Wizard → Manually Set Up The Internet Connection → Specify Ipv6 Internet Connections → Manage The Mtu Size)
- 22. Use The Internet Setup Wizard (Manually Set Up The Internet Connection → Specify An Internet Connection Without A Login)
- 23. Enter The Router Admin User Name And Password. (Select Internet. → In The Does Your Internet Connection Require A Login? Section, Leave The No Radio Button Selected. → Select An Internet Ip Address Radio Button: → Select A Domain Name Server (dns) Address Radio Button: → Select A Router Mac Address Radio Button: → Click The Apply Button.)
- 24. Specify An Internet Connection That Uses A Login (To View Or Change The Basic Internet Setup → Enter The Router Admin User Name And Password → Select Internet → In The Does Your Internet Connection Require A Login? Section → From The Internet Service Provider Menu → Select An Internet Ip Address Radio Button)
- 25. Getdynamicallyfromisp (Usestaticipaddress → Selectadomainnameserver(dns)address → Selectaroutermacaddress → Clicktheapplybutton → Clickthetestbuttontotestyourinternetconnection → Specifyipv6internetconnections)
- 26. Requirements For Entering Ipv6 Addresses (Use Auto Detect For An Ipv6 Internet Connection → Specify Your Internet Settings)
- 27. Connection Type (Routers Ipv6 Address On Wan → Routers Ipv6 Address On Lan → Ip Address Assignment → (optional) Use This Interface Id → Ipv6 Filtering → Set Up An Ipv6 6to4 Tunnel Internet Connection)
- 28. To Set Up An Ipv6 Internet Connection By Using A 6to4 Tunnel: (Launch A Web Browser From A Computer Or Mobile Device That Is Connected To The Router Network. → Enter Http://www.routerlogin.net. → Enter The Router Admin User Name And Password. → Select Advanced > Advanced Setup > Ipv6. → From The Internet Connection Type Menu, Select 6to4 Tunnel. → Select A Remote 6to4 Relay Router Radio Button. → Select An Ip Address Assignment Radio Button. → (optional) Select The Use This Interface Id Check Box And Specify The Interface Id. → Select An Ipv6 Filtering Radio Button.)
- 29. Set Up An Ipv6 Pass-through Internet Connection (Set Up An Ipv6 Fixed Internet Connection → Specify Your Internet Settings)
- 30. Enter The Router Admin User Name And Password (Select Advanced > Advanced Setup > Ipv6 → Configure The Fixed Ipv6 Addresses For The Wan Connection → Select An Ip Address Assignment Radio Button → Specify Your Internet Settings)
- 31. Set Up An Ipv6 Dhcp Internet Connection (Launch A Web Browser From A Computer Or Mobile Device That Is Connected To The Router Network → Enter Http://www.routerlogin.net → Enter The Router Admin User Name And Password → Select Advanced > Advanced Setup > Ipv6 → From The Internet Connection Type Menu, Select Dhcp → (optional) In The User Class (if Required) Field, Enter A Host Name)
- 32. Set Up An Ipv6 Pppoe Internet Connection (Specify Your Internet Settings → Select An Ip Address Assignment Radio Button → Select An Ipv6 Filtering Radio Button → (optional) Select The Use This Interface Id Check Box)
- 33. Internet Connection Type (Login → Password → Service Name → Connection Mode → Ip Address Assignment → Use This Interface Id)
- 34. Use Auto Config For An Ipv6 Internet Connection (Specify Your Internet Settings → Select An Ipv6 Filtering Radio Button → Click The Apply Button → Enter The Router Admin User Name And Password → Select Advanced > Advanced Setup > Ipv6 → From The Internet Connection Type Menu, Select Auto Config)
- 35. Dhcp Domain Name (if Required) (Ip Address Assignment → Use This Interface Id → Ipv6 Filtering → Set Up An Ipv6 6rd Internet Connection → Specify Your Internet Settings)
- 36. Auto Detect Mode (Manual Mode → To Set Up An Ipv6 6rd Internet Connection → Rd (ipv6 Rapid Development) Configuration → Routers Ipv6 Address On Lan → Get Automatically From Isp → Use These Dns Servers)
- 37. Select An Ip Address Assignment Radio Button ((optional) Select The Use This Interface Id Check Box → Select An Ipv6 Filtering Radio Button → Manage The Mtu Size → Mtu Concepts → Specify Your Internet Settings)
- 38. Change The Mtu Size (Specify Your Internet Settings)
- 39. Advanced > Setup > Wan Setup (Mtu Size → Apply → Specify Your Internet Settings)
- 40. Control Access To The Internet (Enable Access Control To Allow Or Block Access To The Internet → Use Keywords To Block Internet Sites → Manage Network Access Control Lists → Schedule When To Block Internet Sites And Services → Set Up Security Event Email Notifications)
- 41. Enable Access Control To Allow Or Block Access To The Internet (To Set Up Access Control → Select Advanced > Security > Access Control → Turn On Access Control → Select An Access Rule → View Allowed Or Blocked Devices That Are Not Connected → Control Access To The Internet)
- 42. Allowing Wifi-enabled Devices (Blocking Internet Sites → Accessing The Router → Router Admin Login → Keyword Blocking Options → Control Access To The Internet)
- 43. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Control Access To The Internet)
- 44. Block Services From The Internet (To Block Services → Specify When To Block The Services → Click The Add Button → To Add A Service That Is In The Service Type Menu → To Add A Service Or Application That Is Not In The Menu → Control Access To The Internet)
- 45. Delete Keywords From The Blocked List (Control Access To The Internet)
- 46. Preventblockingonatrustedcomputer (Manage Network Access Control Lists → Control Access To The Internet)
- 47. Access Control (Schedule Blocking → Control Access To The Internet)
- 48. Set Up Security Event Email Notifications (Control Access To The Internet)
- 49. Nighthawk Ax4 4-stream Ax3000 Wifi Router (My Mail Server Requires Authentication → Send Alerts Immediately → Send Logs According To This Schedule → Apply → Control Access To The Internet)
- 50. Manage Network Settings (View Or Change The Wan Settings → Set Up A Default Dmz Server → Change The Routers Device Name → Change The Lan Tcp/ip Settings → Specify Basic Wifi Settings → Set Up A Guest Wifi Network)
- 51. View Or Change The Wan Settings (Disable Port Scan And Dos Protection → Default Dmz Server → Respond To Ping On Internet Port → Disable Igmp Proxying → Mtu Size (in Bytes) → Nat Filtering)
- 52. Disablesipalg (Setupadefaultdmzserver → Warning:dmzserversposeasecurityrisk → Managenetworksettings)
- 53. Change The Routers Device Name (Change The Lan Tcp/ip Settings → Manage Network Settings)
- 54. Change Lan Tcp/ip Settings (Select Advanced > Setup > Lan Setup → Ip Address Field → Ip Subnet Mask Field → Change Rip Settings → Select Rip Direction → Select Rip Version)
- 55. Specify The Ip Addresses That The Router Assigns (Launch A Web Browser From A Computer Or Mobile Device That Is Connected To The Router Network → Enter Http://www.routerlogin.net → Enter The Router Admin User Name And Password → Select Advanced > Setup > Lan Setup → Make Sure That The Use Router As Dhcp Server Check Box Is Selected)
- 56. Specifythe Range Of Ip Addresses That The Router Assigns (Disable The Dhcp Server Feature In The Router → Launch A Web Browser From A Computer Or Mobile Device That Is Connected To The Router Network → Enter Http://www.routerlogin.net → Enter The Router Admin User Name And Password → Select Advanced > Setup > Lan Setup → Your Settings Are Saved)
- 57. Manage Reserved Lan Ip Addresses (Reserve An Ip Address → Assign Reserved Ip Addresses To Computers Or Servers That Require Permanent Ip Settings → Use Router As Dhcp Server → Enter Http://www.routerlogin.net → Select Advanced > Setup > Lan Setup → Type The Mac Address Of The Computer Or Server)
- 58. Edit A Reserved Ip Address (Delete A Reserved Ip Address Entry → Manage Network Settings)
- 59. Basic Home Page (Advanced > Setup > Lan Setup → Wps Wizard For Wifi Connections → Connect To The Wifi Network Using Wps → Manage Network Settings)
- 60. Specify Basic Wifi Settings (Manage Network Settings)
- 61. Change The Wifi Mode (Manage Network Settings → Change The Network Name (ssid) → Change The Wifi Channel → Apply Button → Connect Wirelessly To The Network → Check Network Connection Issues)
- 62. Change The Wifi Mode If Ax Wifi Is Enabled (To Change The Wifi Mode Settings If Ax Wifi Is Enabled → Manage Network Settings)
- 63. Change The Wifi Mode If Ax Wifi Is Disabled (Launch A Web Browser From A Computer Or Mobile Device That Is Connected To The Router Network → Enter Http://www.routerlogin.net → Enter The Router Admin User Name And Password → Select Wireless → The Wireless Settings Page Displays → In The Wireless Network (2.4 Ghz B/g/n/ax) Section, Select A Wifi Mode From The Mode Menu)
- 64. Select A Wifi Mode From The Mode Menu (Change The Transmission Power Control → Launch A Web Browser From A Computer Or Mobile Device → Enter Http://www.routerlogin.net → Enter The Router Admin User Name And Password → The Basic Home Page Displays → Select Wireless)
- 65. Change The Wifi Password Or The Wifi Security (Manage Network Settings)
- 66. Change Wifi Security (Set Up A Guest Wifi Network → Manage Network Settings)
- 67. To Set Up A Guest Wifi Network: (Enable Guest Network → Enable Ssid Broadcast → Allow Guests To See Each Other And Access My Local Network → Guest Wireless Network Name (ssid) → Select A Wifi Security Option For The 2.4 Ghz Or 5 Ghz Guest Wifi Network)
- 68. Wpa2-personal [aes] (Wpa-personal [tkip] + Wpa2-personal [aes] → Wpa3-personal [sae] → Apply Button → Reconnect Over Wifi To The Network With Its New Security Settings → Manage Network Settings)
- 69. Control The Wifi Radios (Use The Wifi On/off Button → Enable Or Disable The Wifi Radios → Launch A Web Browser → Enter Http://www.routerlogin.net → Enter The Router Admin User Name And Password → Select Advanced > Advanced Setup > Wireless Settings)
- 70. Turn On The Wifi Radio (Set Up A Wifi Schedule → Manage Network Settings)
- 71. Set Up The Router As A Wifi Access Point (To Set Up The Router As An Ap: → Manage Network Settings)
- 72. Set Up A Bridge For A Port Group Or Vlan Tag (Set Up A Bridge For A Port Group → To Configure A Port Group And Enable The Bridge → Manage Network Settings)
- 73. Wired Ports (Wireless → Set Up A Bridge For A Vlan Tag Group → Add A Vlan Tag Group And Enable The Bridge → Enter The Router Admin User Name And Password → Select Advanced > Advanced Setup > Vlan/bridge Settings → Your Settings Are Saved)
- 74. Enablevlan/bridgesetup (Byvlantaggroup → Addvlanrule → Specifyvlantaggroupsettings → Setupaniptvport → Managenetworksettings)
- 75. To Configure An Iptv Port: (Manage Custom Static Routes → Manage Network Settings)
- 76. Set Up A Static Route (Manage Network Settings)
- 77. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Edit A Static Route → Manage Network Settings)
- 78. Delete A Static Route (Enable Or Disable Implicit Beamforming → Manage Network Settings)
- 79. Enter The Router Admin User Name And Password (Select Advanced > Advanced Setup > Wireless Settings → Enable Implicit Beamforming → Enable Or Disable Mu-mimo → Manage Network Settings)
- 80. Enable Or Disable Mu-mimo (Enable Or Disable Pmf → Launch A Web Browser → Enter Router Login Details → Select Advanced > Advanced Setup > Wireless Settings → Click The Apply Button → Manage Network Settings)
- 81. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Specify Readydlna Media Server Settings → Manage Network Settings)
- 82. Optimize Performance (Usedynamicqos To Optimize Internet Traffic Management → Improve Network Connections With Universal Plug And Play → Wi-fi Multimedia Quality Of Service → Enable Or Disable Ax Wifi → Enable Or Disable Smart Connect)
- 83. Enable Dynamic Qos (Optimize Performance)
- 84. Enable Or Disable The Automatic Qos Database Update (Manually Update The Dynamic Qos Database → Optimize Performance)
- 85. To Manually Update The Dynamic Qos Database: (Improve Network Connections With Universal Plug And Play → To Enable Universal Plug And Play: → Optimize Performance)
- 86. Advanced > Advanced Setup > Upnp (Turn Upnp On → Advertisement Period In Minutes → Advertisement Time To Live In Hops → Apply Button → Upnp Portmap Table → Wi-fi Multimedia Quality Of Service)
- 87. To Disable The Wmm Settings (Enable Or Disable Ax Wifi → Optimize Performance)
- 88. Enable Or Disable Ax Wifi (Enable Or Disable Smart Connect → Optimize Performance)
- 89. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Wireless Setup → Enable Smart Connect → Optimize Performance)
- 90. Manage Your Router (Update The Router Firmware → Change The Admin Password → Enable Admin Password Recovery → Recover The Admin Password → View Information About The Router And The Internet And Wifi Settings → Return The Router To Its Factory Default Settings)
- 91. Update The Router Firmware (Check For New Firmware And Update The Router → Manage Your Router)
- 92. Manually Upload Firmware To The Router (Note: We Recommend That You Connect A Computer To The Router Using An Ethernet Connection To Upload The Firmware. → Enter The Router Admin User Name And Password → Select Advanced > Administration > Router Update → Click The Browse Button → Click The Upload Button → Note: To Avoid The Risk Of Corrupting The Firmware, Do Not Interrupt The Update.)
- 93. Change The Admin Password (Enable Admin Password Recovery)
- 94. Enter The Router Admin User Name And Password (Select Advanced > Administration > Set Password → Select The Enable Password Recovery Check Box → Recover The Admin Password → Launch A Web Browser From A Computer Or Mobile Device → Enter The Serial Number Of The Router → Manage Your Router)
- 95. Manage Your Router (View Information About The Router And The Internet And Wifi Settings → Launch A Web Browser From A Computer Or Mobile Device → Enter Http://www.routerlogin.net → Enter The Router Admin User Name And Password → Click The Advanced Tab → The Information On This Page Uses The Following Color Coding)
- 96. Display The Statistics Of The Internet Port (Launch A Web Browser → Enter Http://www.routerlogin.net → Enter The Router Admin User Name And Password → Click The Advanced Tab → In The Internet Port Pane, Click The Show Statistics Button → Manage Your Router)
- 97. Check The Internet Connection Status (Manage Your Router)
- 98. View And Manage Logs Of Router Activity (To View And Manage Logs: → Manage Your Router)
- 99. Set Up Email Notifications (View Devices Currently On The Network → Monitor Internet Traffic → Manage Your Router)
- 100. Launch A Web Browser (Enter Router Login Url → Enter Router Admin User Name And Password → Select Advanced > Advanced Setup > Traffic Meter → Control The Volume Of Internet Traffic → Set The Traffic Counter → Specify Warning Message For Monthly Limit)
- 101. Manage The Router Configuration File (Back Up The Settings → Erase The Settings)
- 102. To Erase The Settings: (Restore The Settings → Manage Your Router)
- 103. Connect To Your Router With Anywhere Access (Update Your Routers Firmware → Download The Latest Nighthawk App → Disable Led Blinking Or Turn Off Leds → Manage Your Router)
- 104. Set Your Time Zone (Return The Router To Its Factory Default Settings → Manage Your Router)
- 105. Use The Reset Button (Erase The Settings → Manage Your Router)
- 106. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Advanced > Administration > Backup Settings → Backup Settings → Erase Button → Configuration Is Reset To Factory Default Settings → Warning: To Avoid The Risk Of Corrupting The Firmware, Do Not Interrupt The Reset. → Manage Your Router)
- 107. Usb Device Requirements (Connect A Usb Storage Device To The Router → Access A Storage Device Connected To The Router From A Windows-based Computer → Map A Usb Device To A Windows Network Drive → Access A Storage Device That Is Connected To The Router From A Mac → Enable Ftp Access Within Your Network → View Network Folders On A Storage Device)
- 108. Usb Device Requirements (Connect A Usb Storage Device To The Router → Share Usb Storage Devices Attached To The Router)
- 109. Access A Storage Device Connected To The Router From A Windows-based Computer (Map A Usb Device To A Windows Network Drive → Share Usb Storage Devices Attached To The Router)
- 110. Access A Storage Device That Is Connected To The Router From A Mac (Connect A Usb Storage Device To A Usb Port On Your Router → Enable Access Control To Allow Or Block Access To The Internet → Share Usb Storage Devices Attached To The Router)
- 111. Enableftpaccesswithinyournetwork (Viewnetworkfoldersonastoragedevice → Shareusbstoragedevicesattachedtotherouter)
- 112. Add A Network Folder On A Usb Storage Device (Share Usb Storage Devices Attached To The Router → Read Access And Write Access → Folder Name → Volume Name → Total Space And Free Space → Share Name)
- 113. Usb Device Menu (Share Name Field → Read Access Menu → Write Access Menu → Edit A Network Folder On A Usb Storage Device → Launch A Web Browser → Enter Router Admin User Name And Password)
- 114. Edit Network Folder (Safely Remove A Usb Storage Device → Share Usb Storage Devices)
- 115. Set Up And Manage Dynamic Dns (Set Up Ftp Access Through The Internet → Your Personal Ftp Server → Access Usb Storage Devices Through The Internet)
- 116. Set Up And Manage Dynamic Dns (Set Up Ftp Access Through The Internet → Use Dynamic Dns To Access Usb Storage Devices Through The Internet)
- 117. Set Up Your Personal Ftp Server (Set Up A New Dynamic Dns Account → Make Sure That Your Internet Connection Is Working → Connect A Storage Device To The Router → Set Up Ftp Access In The Router → Use Dynamic Dns To Access Usb Storage Devices Through The Internet)
- 118. Set Up A New Dynamic Dns Account (Specify A Dns Account That You Already Created → Use Dynamic Dns To Access Usb Storage Devices Through The Internet)
- 119. Enter The Router Admin User Name And Password (Select Advanced > Advanced Setup > Dynamic Dns → Use A Dynamic Dns Service → Specify The User Name Or Email Address For Your Account → Type The Password For Your Ddns Account → Verify That Your Dynamic Dns Service Is Enabled In The Router → Change The Dynamic Dns Settings)
- 120. Enter The Router Admin User Name And Password (Select Advanced > Advanced Setup > Dynamic Dns → Change Your Ddns Account Settings As Necessary → Access Usb Storage Devices Through The Internet → Use Dynamic Dns To Access Usb Storage Devices Through The Internet)
- 121. Use Vpn To Access Your Network (Set Up A Vpn Connection → Specify Vpn Service In The Router → Install Openvpn Software → Use A Vpn Tunnel On Your Windows Computer → Use Vpn To Access The Routers Usb Device And Media → Use Vpn To Access Your Internet Service At Home)
- 122. Set Up A Vpn Connection (Specify Vpn Service In The Router → Use Vpn To Access Your Network)
- 123. Install Openvpn Software (Install Openvpn Software On Your Windows Computer → Use Vpn To Access Your Network)
- 124. Windows Installer (Download And Install Open Vpn Software → License Agreement → Use Vpn To Access Your Network)
- 125. Installation Steps (Configuration Files → Vpn Client Installation → Modifying Vpn Interface Name → Accessing Network Settings)
- 126. Install Openvpn Software On Your Mac Computer (Enable Vpn Service → Specify Vpn Service Settings → Download The Openvpn Client Utility For Mac Os X → Use Vpn To Access Your Network)
- 127. Install Openvpn Software On An Ios Device (Install Openvpn Software On An Android Device → Use Vpn To Access Your Network)
- 128. Install Vpn Client Software On An Android Device (Enable Vpn Service → Specify Vpn Service Settings → Download Openvpn Configuration Files → Use A Vpn Tunnel On Your Windows Computer → Access Your Network Via Vpn)
- 129. Change The Lan Tcp/ip Settings (Open A Vpn Tunnel → Use Vpn To Access Your Network)
- 130. Use Vpn To Access The Routers Usb Device (Use Vpn To Access Your Internet Service At Home → Use Vpn To Access Your Network)
- 131. Set Up Vpn Client Internet Access In The Router (Block Vpn Client Internet Access In The Router → Use Vpn To Access Your Network)
- 132. Allow Vpn Clients To Access Only Your Home Network (Use A Vpn Tunnel To Access Your Internet Service → Set Up Vpn Client Internet Access In The Router)
- 133. Use Vpn To Access Your Network
- 134. Manage Port Forwarding To A Local Server (Port Triggering)
- 135. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Set Up Port Forwarding To A Local Server → Manage Port Forwarding And Port Triggering)
- 136. Add A Custom Port Forwarding Service (Manage Port Forwarding And Port Triggering)
- 137. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Edit A Port Forwarding Service → Manage Port Forwarding And Port Triggering)
- 138. Delete A Port Forwarding Entry (Application Example: Make A Local Web Server Public → Manage Port Forwarding And Port Triggering)
- 139. How The Router Implements The Port Forwarding Rule (Port Triggering → Manage Port Forwarding And Port Triggering)
- 140. Add A Port Triggering Service (Manage Port Forwarding And Port Triggering)
- 141. Enable Port Triggering (Manage Port Forwarding And Port Triggering)
- 142. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Manage Port Forwarding And Port Triggering)
- 143. Troubleshooting (Quick Tips → Troubleshoot With The Leds → You Cannot Log In To The Router → You Cannot Access The Internet → Troubleshoot Internet Browsing → Troubleshoot Wifi Connectivity)
- 144. Sequence To Restart Your Network (Check The Power Adapter And Ethernet Cable Connections → Check The Wifi Settings → Check The Network Settings)
- 145. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Troubleshoot With The Leds → Standard Led Behavior When The Router Is Powered On → Power Led Is Off Or Blinking → Leds Never Turn Off)
- 146. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Cycle The Power To See If The Router Recovers. → Press And Hold The Reset Button To Return The Router To Its Factory Settings. → Internet Or Ethernet Lan Port Leds Are Off → Wifi Led Is Off → You Cannot Log In To The Router → Troubleshooting)
- 147. Nighthawk Ax4 4-stream Ax3000 Wifi Router (Make Sure That Java, Javascript, Or Activex Is Enabled In Your Browser → If Your Routers Ip Address Was Changed And You Do Not Know The Current Ip Address → If You Are Attempting To Set Up Your Netgear Router As A Replacement For An Adsl Gateway → You Cannot Access The Internet → To Check The Wan Ip Address)
- 148. Entering The Router Login (Router Admin User Name And Password → Checking Ip Address For Internet Port → Troubleshooting Ip Address Issues → Isp Login Requirements → Configuring Mac Address → Dns Server Address Configuration)
- 149. Troubleshoot Internet Browsing (Changes Are Not Saved)
- 150. Troubleshoot Wifi Connectivity (Troubleshoot Your Network Using The Ping Utility → Test The Lan Path To Your Router → Wifi Settings For The Router → Check The Wifi Led On The Router → Ssid Broadcast → Wifi Security Support)
- 151. To Ping The Router From A Windows-based Computer: (Wrong Physical Connections → Wrong Network Configuration → Test The Path From A Windows-based Computer To A Remote Device → Troubleshooting)
- 152. Internet Setup (Troubleshooting → Ip Configuration → Mac Address Configuration)
- 153. Factorysettings (Technicalspecifications)
- 154. Factory Settings (Router Login → User Name (case-sensitive) → Login Password (case-sensitive) → Wan Mac Address → Lan Ip → Dhcp Server)
- 155. Factory Default Settings (Technical Specifications → Data And Routing Protocols → Power Adapter → Dimensions → Operating Temperature → Operating Humidity)
- 156. Router Specifications (Wan → Wifi → Radio Data Rates → 11 Security → Maximum Computers Per Wireless Network → Data Encoding Standards)
×
NETGEAR RAX40v2 Nighthawk AX4 4-Stream AX3000 WiFi Router User Manual
Nighthawk AX4 4-Stream AX3000 WiFi Router
Change the admin password
The admin password is the one you specified the first time you logged in. You can
change this password.
Note: The ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
To change the password for the admin user name:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5. Type the old password in the Old Password field.
6. Type the new password in the Set Password and Repeat New Password fields.
7. Click the Apply button.
Your settings are saved.
Enable admin password recovery
The router admin password is used to log in to your router web interface. We recommend
that you enable password recovery so that you can recover the password if it is forgotten.
This recovery process is supported in Internet Explorer, Firefox, and Chrome browsers
but not in the Safari browser.
To enable password recovery:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
Manage Your Router
93
User Manual
| General | Details |
|---|---|
| Name | NETGEAR RAX40v2 Nighthawk AX4 4-Stream AX3000 WiFi Router User Manual |
| Make | NETGEAR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.33 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding NETGEAR RAX40v2 Nighthawk AX4 4-Stream AX3000 WiFi Router User Manual, please ask here and describe the problem in detail.
NETGEAR RAX10 AX1800 WiFi 6 Router User Guide
NETGEAR XR1000v2 Nighthawk WiFi 6 Pro Gaming Router User Guide
NETGEAR PR60X Pro 10G Multi Gigabit Dual WAN Pro Router Installation Guide
NETGEAR AC2600 Wi-Fi Router User Guide
NETGEAR AX6 Stream Wi-Fi Router User Manual
NETGEAR MR6110 M6 5G WiFi 6 Mobile Router User Manual
NETGEAR RBR20 Orbi Mesh WiFi Router User Guide
NETGEAR RS280S Nighthawk WiFi 7 Tri-Band Router Owner’s Manual
NETGEAR BE9200 WiFi 7 Router Instruction Manual
NETGEAR RS600 Tri Band WiFi 7 Router User Guide
ASUS RT-BE96U BE19000 Tri Band WiFi Router User Guide
HERCULES HE042 Compact Trim Router Owner’s Manual
TP-Link Archer AX72 AX5400 Multi-Gigabit Wi-Fi 6 Router Installation Guide
ZTE U30 Air 5g Portable WiFi Mobile WiFi Router User Guide
peplink MAX BR1 Pro 5G Cellular WiFi Router User Manual
TP-Link ER605 Omada VPN Router Installation Guide
ASUS GT-AX11000 Pro ROG Rapture Tri-band Gaming Router User Guide
Wi-Tek WI-LTE300 Wireless 4G LTE Router Installation Guide
D-Link M30 AQUILA PRO AI AX3000 Wi-Fi 6 Mesh Router User Manual
D-Link DPN-BE7212GR Wi-Fi 7 Router Instruction Manual
Table of Contents
- 1. Nighthawk Ax4 4-stream Ax3000 Wifi Router Model Rax40v2 Netg... →
- 2. Support And Community - Regulatory And Legal →
- 3. Hardware Setup - Connect To The Network And Access The Route... →
- 4. Change The Mtu Size - Enable Access Control To Allow Or Bloc... →
- 5. Deleteastaticroute - Enableordisableimpli... →
- 6. Access A Storage Device Connected To The Router From A Windo... →
- 7. How The Router Implements The Port Forwarding Rule - Port Tr... →
- 8. Hardware Setup - Unpack Your Router →
- 9. Unpack Your Router - Top Panel Leds And Buttons →
- 10. Hardware Setup - Led Descriptions →
- 11. Rear Panel - Hardware Setup →
- 12. Router Label - Position Your Router →
- 13. Cable Your Router - Hardware Setup →
- 14. Connect The Power Adapter To Your Router And Plug The Power ... →
- 15. Connectto The Router Network - Typesof Logins →
- 16. Connect To The Router Network - Connect To The Router Using ... →
- 17. To Use Wps To Connect To The Wifi Network: - Types Of Logins →
- 18. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Isp Configuratio... →
- 19. Log In To The Router - Install And Manage Your Router With T... →
- 20. To Install Your Router Using The Nighthawk App: - Change The... →
- 21. Specify Your Internet Settings - Use The Internet Setup Wiza... →
- 22. Use The Internet Setup Wizard - Manually Set Up The Internet... →
- 23. Enter The Router Admin User Name And Password. - Select Inte... →
- 24. Specify An Internet Connection That Uses A Login - To View O... →
- 25. Getdynamicallyfromis... - Usestaticipaddress →
- 26. Requirements For Entering Ipv6 Addresses - Use Auto Detect F... →
- 27. Connection Type - Routers Ipv6 Address On Wan →
- 28. To Set Up An Ipv6 Internet Connection By Using A 6to4 Tunnel... →
- 29. Set Up An Ipv6 Pass-through Internet Connection - Set Up An ... →
- 30. Enter The Router Admin User Name And Password - Select Advan... →
- 31. Set Up An Ipv6 Dhcp Internet Connection - Launch A Web Brows... →
- 32. Set Up An Ipv6 Pppoe Internet Connection - Specify Your Inte... →
- 33. Internet Connection Type - Login →
- 34. Use Auto Config For An Ipv6 Internet Connection - Specify Yo... →
- 35. Dhcp Domain Name (if Required) - Ip Address Assignment →
- 36. Auto Detect Mode - Manual Mode →
- 37. Select An Ip Address Assignment Radio Button - (optional) Se... →
- 38. Change The Mtu Size - Specify Your Internet Settings →
- 39. Advanced > Setup > Wan Setup - Mtu Size →
- 40. Control Access To The Internet - Enable Access Control To Al... →
- 41. Enable Access Control To Allow Or Block Access To The Intern... →
- 42. Allowing Wifi-enabled Devices - Blocking Internet Sites →
- 43. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Control Access T... →
- 44. Block Services From The Internet - To Block Services →
- 45. Delete Keywords From The Blocked List - Control Access To Th... →
- 46. Preventblockingonatrustedcomputer - Manage Network Access Co... →
- 47. Access Control - Schedule Blocking →
- 48. Set Up Security Event Email Notifications - Control Access T... →
- 49. Nighthawk Ax4 4-stream Ax3000 Wifi Router - My Mail Server R... →
- 50. Manage Network Settings - View Or Change The Wan Settings →
- 51. View Or Change The Wan Settings - Disable Port Scan And Dos ... →
- 52. Disablesipalg - Setupadefaultdmzserv... →
- 53. Change The Routers Device Name - Change The Lan Tcp/ip Setti... →
- 54. Change Lan Tcp/ip Settings - Select Advanced > Setup > Lan S... →
- 55. Specify The Ip Addresses That The Router Assigns - Launch A ... →
- 56. Specifythe Range Of Ip Addresses That The Router Assigns - D... →
- 57. Manage Reserved Lan Ip Addresses - Reserve An Ip Address →
- 58. Edit A Reserved Ip Address - Delete A Reserved Ip Address En... →
- 59. Basic Home Page - Advanced > Setup > Lan Setup →
- 60. Specify Basic Wifi Settings - Manage Network Settings →
- 61. Change The Wifi Mode - Manage Network Settings →
- 62. Change The Wifi Mode If Ax Wifi Is Enabled - To Change The W... →
- 63. Change The Wifi Mode If Ax Wifi Is Disabled - Launch A Web B... →
- 64. Select A Wifi Mode From The Mode Menu - Change The Transmiss... →
- 65. Change The Wifi Password Or The Wifi Security - Manage Netwo... →
- 66. Change Wifi Security - Set Up A Guest Wifi Network →
- 67. To Set Up A Guest Wifi Network: - Enable Guest Network →
- 68. Wpa2-personal [aes] - Wpa-personal [tkip] + Wpa2-personal [a... →
- 69. Control The Wifi Radios - Use The Wifi On/off Button →
- 70. Turn On The Wifi Radio - Set Up A Wifi Schedule →
- 71. Set Up The Router As A Wifi Access Point - To Set Up The Rou... →
- 72. Set Up A Bridge For A Port Group Or Vlan Tag - Set Up A Brid... →
- 73. Wired Ports - Wireless →
- 74. Enablevlan/bridgeset... - Byvlantaggroup →
- 75. To Configure An Iptv Port: - Manage Custom Static Routes →
- 76. Set Up A Static Route - Manage Network Settings →
- 77. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Edit A Static Ro... →
- 78. Delete A Static Route - Enable Or Disable Implicit Beamformi... →
- 79. Enter The Router Admin User Name And Password - Select Advan... →
- 80. Enable Or Disable Mu-mimo - Enable Or Disable Pmf →
- 81. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Specify Readydln... →
- 82. Optimize Performance - Usedynamicqos To Optimize Internet Tr... →
- 83. Enable Dynamic Qos - Optimize Performance →
- 84. Enable Or Disable The Automatic Qos Database Update - Manual... →
- 85. To Manually Update The Dynamic Qos Database: - Improve Netwo... →
- 86. Advanced > Advanced Setup > Upnp - Turn Upnp On →
- 87. To Disable The Wmm Settings - Enable Or Disable Ax Wifi →
- 88. Enable Or Disable Ax Wifi - Enable Or Disable Smart Connect →
- 89. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Wireless Setup →
- 90. Manage Your Router - Update The Router Firmware →
- 91. Update The Router Firmware - Check For New Firmware And Upda... →
- 92. Manually Upload Firmware To The Router - Note: We Recommend ... →
- 93. Change The Admin Password - Enable Admin Password Recovery →
- 94. Enter The Router Admin User Name And Password - Select Advan... →
- 95. Manage Your Router - View Information About The Router And T... →
- 96. Display The Statistics Of The Internet Port - Launch A Web B... →
- 97. Check The Internet Connection Status - Manage Your Router →
- 98. View And Manage Logs Of Router Activity - To View And Manage... →
- 99. Set Up Email Notifications - View Devices Currently On The N... →
- 100. Launch A Web Browser - Enter Router Login Url →
- 101. Manage The Router Configuration File - Back Up The Settings →
- 102. To Erase The Settings: - Restore The Settings →
- 103. Connect To Your Router With Anywhere Access - Update Your Ro... →
- 104. Set Your Time Zone - Return The Router To Its Factory Defaul... →
- 105. Use The Reset Button - Erase The Settings →
- 106. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Advanced > Admin... →
- 107. Usb Device Requirements - Connect A Usb Storage Device To Th... →
- 108. Usb Device Requirements - Connect A Usb Storage Device To Th... →
- 109. Access A Storage Device Connected To The Router From A Windo... →
- 110. Access A Storage Device That Is Connected To The Router From... →
- 111. Enableftpaccesswithinyournetwork - Viewnetworkfoldersonastor... →
- 112. Add A Network Folder On A Usb Storage Device - Share Usb Sto... →
- 113. Usb Device Menu - Share Name Field →
- 114. Edit Network Folder - Safely Remove A Usb Storage Device →
- 115. Set Up And Manage Dynamic Dns - Set Up Ftp Access Through Th... →
- 116. Set Up And Manage Dynamic Dns - Set Up Ftp Access Through Th... →
- 117. Set Up Your Personal Ftp Server - Set Up A New Dynamic Dns A... →
- 118. Set Up A New Dynamic Dns Account - Specify A Dns Account Tha... →
- 119. Enter The Router Admin User Name And Password - Select Advan... →
- 120. Enter The Router Admin User Name And Password - Select Advan... →
- 121. Use Vpn To Access Your Network - Set Up A Vpn Connection →
- 122. Set Up A Vpn Connection - Specify Vpn Service In The Router →
- 123. Install Openvpn Software - Install Openvpn Software On Your ... →
- 124. Windows Installer - Download And Install Open Vpn Software →
- 125. Installation Steps - Configuration Files →
- 126. Install Openvpn Software On Your Mac Computer - Enable Vpn S... →
- 127. Install Openvpn Software On An Ios Device - Install Openvpn ... →
- 128. Install Vpn Client Software On An Android Device - Enable Vp... →
- 129. Change The Lan Tcp/ip Settings - Open A Vpn Tunnel →
- 130. Use Vpn To Access The Routers Usb Device - Use Vpn To Access... →
- 131. Set Up Vpn Client Internet Access In The Router - Block Vpn ... →
- 132. Allow Vpn Clients To Access Only Your Home Network - Use A V... →
- 133. Use Vpn To Access Your Network →
- 134. Manage Port Forwarding To A Local Server - Port Triggering →
- 135. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Set Up Port Forw... →
- 136. Add A Custom Port Forwarding Service - Manage Port Forwardin... →
- 137. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Edit A Port Forw... →
- 138. Delete A Port Forwarding Entry - Application Example: Make A... →
- 139. How The Router Implements The Port Forwarding Rule - Port Tr... →
- 140. Add A Port Triggering Service - Manage Port Forwarding And P... →
- 141. Enable Port Triggering - Manage Port Forwarding And Port Tri... →
- 142. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Manage Port Forw... →
- 143. Troubleshooting - Quick Tips →
- 144. Sequence To Restart Your Network - Check The Power Adapter A... →
- 145. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Troubleshoot Wit... →
- 146. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Cycle The Power ... →
- 147. Nighthawk Ax4 4-stream Ax3000 Wifi Router - Make Sure That J... →
- 148. Entering The Router Login - Router Admin User Name And Passw... →
- 149. Troubleshoot Internet Browsing - Changes Are Not Saved →
- 150. Troubleshoot Wifi Connectivity - Troubleshoot Your Network U... →
- 151. To Ping The Router From A Windows-based Computer: - Wrong Ph... →
- 152. Internet Setup - Troubleshooting →
- 153. Factorysettings - Technicalspecificati... →
- 154. Factory Settings - Router Login →
- 155. Factory Default Settings - Technical Specifications →
- 156. Router Specifications - Wan →