NORDIC M1R-DH2-12 Corded Router User Manual
NORDIC
2.5 SERVICE
Your power tool should be serviced by a qualified specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
Special safety instructions for Router
•
In carrying out the works, hold the tool by the insulated handles. Contact with current- carrying conductor can result
in electric shock the operator.
•
•
•
•
•
•
•
•
In continuous operation, use hearing protection.
Handle cutters.
Carefully inspect the cutter for cracks and damage before starting work. Immediately replace the damaged items.
Avoid contact with the cutter on the nails. Before starting work, check the surface of the absence of nails.
Hold the paper mill with two hands.
Keep hands away from rotating parts.
Before switching on, make sure that the cutter does not touch the surface.
Before you start using the machine under load, allow it to run at maximum idle for at least 30 seconds in a safe
position. Immediately stop the machine with the appearance of extraneous sounds and vibrations that indicate
improper installation of the cutter.
•
•
•
•
•
Check the correct direction of rotation and feed mills.
Do not leave the tool running unattended. Operate the tool only when it is in their hands.
After turning off the router before removing it from the surface of the sample wait until the cutter.
Do not touch the cutter immediately after use, it can be very hot and cause burns.
Always place the cord in the direction of the machine to a power outlet.
OPERATING PROCEDURE
•
Install the unit on a flat surface. Release the lock lever and lower the motor housing so that it touches
the surface. Lock lever.
•
Rotate the quick feed counterclockwise, move the locking rack down until it touches the adjusting
bolt. Position the pointer on the depth of the division of the “0”. Milling depth will now register pointer
depth.
•
•
Press the fast forward feed, lift the locking rack to reach the selected depth. Fine adjustment is
achieved by turning the locking rack (1 mm per revolution).
Rotate the quick feed clockwise firmly secure the locking plate. Now, the preset cutting depth can be
obtained weakening buttons fast delivery and lowering the body until it touches the stopper router
rack adjustment bolt lock
4
| General | Details |
|---|---|
| Name | NORDIC M1R-DH2-12 Corded Router User Manual |
| Make | NORDIC |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.1 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding NORDIC M1R-DH2-12 Corded Router User Manual, please ask here and describe the problem in detail.
NETGEAR Nighthawk 6-Stream AX5200 WiFi Router RAX48 User Guide
netgate 8200 Secure Router User Manual
westermo 4400 Cellular Router User Guide
CEDARouter C3 5G Aggregation Router User Guide
ADVANTECH ICR-2431 LTE Router User Manual
TP-Link Archer BE550 Pro Tri-Band Wi-Fi 7 Router Instructions
NETGEAR Nighthawk AXE11000 Tri-Band WiFi 6E Router RAXE500 User Manual
Tenda 5G03 Wi-Fi 6 5G NR Router Installation Guide
TP-Link Archer C54 Dual Band Wi-Fi Router Installation Guide
GLiNet MT6000 Wireless Router User Guide