Roam-ON R10 MiFi 4G LTE WiFi Mobile Hotspot Router User Manual

1

2

R10 MANUAL  

ROAM-ON R10 APPEARANCE  

PRECAUTIONS  

Please read the following precautions before  

using:  

Handle with care, device should be kept  

cleanly.  

Do not put in place with wet, water or other  

liquids.  

Screen  

Power Button  

Do not put in place of extremely high or low  

temperatures.  

Do not drop, throw, bend or demolish.  

Do not put or install on top of car airbags.  

determines the applicable altitudes for using.  

Ambient Temperature: device can be normally  

used at the temperature of -10 ^oC ~ 60 ^oC.  

Micro SIM Card Slot  

Input Charging Port  

NETWORK STANDARDS  

BATTERY  

Support multi-bands of LTE FDD, bands of  

2,4,5,12,17,26 & LTE TDD, bands of 41  

Support HSPA + / UMTS (2100MHz  

/ 1900MHz / 1700MHz (AWS) /  

900MHz / 850MHz)  

Battery Capacity High-capacity lithium battery  

of 5000mAh  

Charging Voltage DC 5V 2A  

Full Charging 4 hours required  

Battery Life Standby for 24 hours. In using for  

Maximum downstream rate  

150Mbps  

Maximum upstream rate 50Mbps  

used.  

Note-1 The ambient temperature should be 0 ^o  

C

- 45 ^oC; 20% battery capacity would be lost after  

normal using for one year.  

Note-2 Do not over charge or discharge, users  

are highly recommended to: recharge every 2  

months if not in used.  

Maximum rate 300Mbps  

Support 802.11 b/g/n/a/ac  

Support band 2.4G/5.0G  

Support simultaneous connections  

for 5 devices  

FUNCTION DESCRIPTION  

SCREEN  

Power Button Long press the power  

button for 3 seconds to power on/off, short  

press to wake up device or switch screen.  

*Reset Device: Long press Power Button for  

15 seconds to reset & restart when Roam-ON  

device can’t be turned off properly.  

Interactive screen will be displayed after net-  

work successfully connected:  

Micro SIM Card Slot Insert SIM /  

USIM card here.  

Signal strength  

Network type (UMTS / H / H+ / LTE)  

Battery icon (means it is in charging)  

Country in using  

Input Charging Port Charge device  

through data cable.  

Screen Display of Roam-ON R10  

device information, network connection  

status, etc.  

Number of connections  

Short press the power button to switch to the  

second screen:  

INSTRUCTIONS  

SIM CARD SETTING  

How to Connect to Roam-ON:  

Roam-ON R10 provides a second using mode by  

enabling SIM Card, setting as follows:  

Reserve Internet Service To ensure internet  

access, please reserve internet service on  

Roam-ON.com  

Card under the power off status of Roam-ON  

Connect Network After power on, Roam-ON  

takes 2-3 minutes to connect and access  

to the preferred local network. Connecting  

details will be displayed in the screen.  

Surf Internet With Roam-ON R10 device on,  

short press the power button, WiFi hotspot  

name(SSID) and password(PWD) will be  

displayed in the screen, connect your smart  

R10 device.  

SIM card angle  

Orientation  

phone or pad to Roam-ON network by input  

By wireless connecting your Internet Equip-  

ment to Roam-ON R10 mobile hotspot.  

Set APN details from http://192.168.1.1/  

apn_set.html  

Roam-ON R10 hotspot name(SSID) and  

password(PWD)  

Roam-ON R10 version, if SIM Card inserted,  

the screen will display “SIM in using”  

R10  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Roam-ON R10 MiFi 4G LTE WiFi Mobile Hotspot Router User Manual
Make	Roam-ON
Language	English
Filetype	PDF (Download)
File size	0.19 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Roam-ON

Questions and Answers (0)

If you have any questions regarding Roam-ON R10 MiFi 4G LTE WiFi Mobile Hotspot Router User Manual, please ask here and describe the problem in detail.