rock space RSD0616 AX1800 Wi-Fi6 WiFi Router Installation Guide

1

单黑 书纸 骑订（2个）  

页码出版麻烦调整下（包括右上角EN）  

Quick Installation Guide  

AX1800 Wi-Fi6 Smart WiFi Router  

RSD0616  

Quick Installation Guide  

Technical Support:  

Phone: 1-833-816-6558  

(EST: 9:00-17:00 / PDT: 06:00-14:00 Monday to Friday)  

Package contents  

Wireless router x 1  

24hour Online  

After-sales Service  

Power adapter x 1  

Ethernet cable x 1  

Quick installation guide x 1  

Email: techsupport@rockspace.cc  

Website: www.rockspace.cc  

24hour Online After-sales Service: https: //rockspace. afterservice. vip  

Scan QR To Visit  

https: //rockspace. afterservice. vip  

Website: www.rockspace.cc  

In the Password field, type the user name(admin)and password(admin)to log into the manage-  

Step 3: Select your Connection Type.  

4. Remove the original router.  

Note: PPPoE is used for illustration here. If you migrated your PPPoE user name and password  

from your original router, this router auto-fills the ISP User Name and ISP Password. Otherwise,  

you should enter your PPPoE user name and password and tap “Next”.  

Step 4: The wireless setting.  

Step 5: Finish setting.  

Step 6: Customize more functions.  

II. Connect your devices to the new router  

I. Connect your router  

Dual Band Setting  

ment interface.  

The router supports three connection types: PPPoE, Dynamic IP Address and Static IP Address.  

And the router will detect your internet connection type automatically. Set required parameters  

and click “Next”.  

Customize your Wi-Fi name (SSID) and Wi-Fi password. You can also hide the SSID, and click  

“Next”.  

Please log in to the management page again. The IP address is 192.168.1.1. You can customize  

the functions you need on this page.  

Power  

Confirm your network name and password and click ”Next”.  

Method 1: Connect your WiFi-enabled device (such as a smart phone) to the new router’s WiFi  

network using the SSID（WiFi name） labeled on the bottom of the router. There is no WiFi  

password by default.  

Hello, welcome to the Rock Space.  

Note:  

Please log in to the management page. The IP address is 192.168.1.1.  

LAN  

1.Click “Wireless”. You could customize your private network name and password here.  

Power  

If this is the first time you are using a router or you are not very proficient in router settings,  

please skip the Step 1 and start from Step 2.  

New router  

rockspace-WiFi6-2.4g  

If you are very proficient in router settings and know what is the PPPoE user name and password,  

you can refer to step 1 to copy them from your original router to AX1800 WiFi router. It will save  

you some time.  

WAN  

Original router  

rockspace-WiFi6-2.4g  

Step 1: Import your PPPoE user name and password from your original router.  

WIFI6-53B9_2.4G  

rockspace-WiFi6-2.4g  

1. Power on your original and new routers.  

rockspace-WiFi6-2.4g  

Ethernet cable  

2. Connect the WAN port of the original router to a LAN port of the new router using an Ethernet  

cable.  

Note: Both the user name and password is “admin”. The password you entered in this step is  

NOT the password for your extended network, it is the password for the extender's manage-  

ment interface. If you cannot log in to the web UI of the router, refer to Q1 in FAQ.  

rockspace-WiFi6-2.4g  

Method 2: Connect your wired device (such as a computer) to a LAN port of the router using an  

Ethernet cable. The LAN LED indicator lights up.  

Step 2: Connect your new router to the internet.  

3. When the WAN and LAN LED indicators of the new router turn solid on for 3 seconds after  

blinking fast, the PPPoE user name and password are imported to your new router successfully.  

Power  

rockspace-WiFi6-5g  

Step 2: Set up the time zone.  

Note: If your internet connection type is Dynamic IP, tap "Next”.  

Internet  

rockspace-WiFi6-5g  

Power  

Please select your region and time zone. Then click “Next”.  

WAN  

LAN  

Modem  

rockspace-WiFi6-5g  

Ethernet cable  

Ethernet cable  

Or  

Note: After this setting, the router will reboot again. Go to your WI-FI network list and find the  

SSID named by yourself. The WiFi-enabled devices can connect to the AX1800 router by entering  

the new password. And the wired devices connected to the router can access the internet  

directly now. If you want to modify the settings, please log in the management page (IP address  

is 192.168.1.1) again after completing the initial settings.  

III. Set up the new router for internet access  

Note: If your internet connection type is Static IP, enter your IP address and other information  

your ISP provides, and tap "Next".  

Step 1: Enter the IP address.  

Note: The router will reboot after changing the network name and password, please  

reconnect by applying the new network name(SSID) and password.  

Note: If you have hidden one or two network name, you should follow the instructions below  

after finishing the setup.  

Ethernet jack  

After the connection with your client device is established, the setup page will automatically pop  

up.  

1. Power on the new router.  

Turn on the smart phone. Then click “Settings>WLAN>Add Network”. And fill in the network  

name you have hidden. Such as ”rockspace-WiFi6-2.4g”. Click “Connect”, and enter the new  

password. You will connect the network successfully.  

3.Turn on the smart phone. Then click “Settings>WLAN>Add Network”. And fill in the  

network name you have hidden. Such as ”rockspace-WiFi6-2.4g”. Click “Connect”, and enter  

the new password. You will connect the network successfully.  

2. Connect the WAN port of the new router to the LAN port of your modem or the Ethernet jack  

using an Ethernet cable. The WAN LED indicator lights on.  

If the setup page doesn't pop up automatically, open your browser on your device and enter  

192.168.1.1 in the address bar and press “Start” on the start page.  

2.Select “Hide SSID”. You could hide the 2.4GHZ Network or the 5GHZ Network and click  

”Save”.  

Note: If the PPPoE user name and password are imported to your new router successfully, this  

router will auto-fill the ISP User Name and ISP Password when you select PPPoE connection type.  

Note: Any questions, you can refer to FAQ firstly.  

1

2

3

4

5

6

V:FAQ  

11. Q: How can I turn on DHCP Server?  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Advanced  

Settings>Network>DHCP Server”. In this interface, you can add a new virtual server.  

12. Q: How can I turn on UPnP?  

2. You can turn on one of the ‘’2.4GHz Guest Network” and ‘’5GHz Guest Network” or both of  

them. Customize your guest network name and password and click “Save”.  

1. Q: Why can't I log in to the web UI of the router?  

Guest Network  

Parental Control  

Access Control  

More features  

A: Step 1: Please confirm your devices connect to the WIFI6-53B9_2.4G.  

Step 2: Please confirm if your IP address is 192.168.1.1.  

LED  

Description  

In addition to some of the settings described above,there are more functions.  

Including Virtual Server, DHCP, UPnP, DMZ, DNS and Firewall Security.  

Please log in to the management page. The IP address is 192.168.1.1.  

Please log in to the management page. The IP address is 192.168.1.1.  

Please log in to the management page. The IP address is 192.168.1.1.  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Advanced  

Settings> UPnP”. In this interface, you can turn on UPnP.  

Step 3: Please confirm both the user name and password is “admin”.  

1. Click “Advanced Settings> Network Control>Parental Control”. In this interface, you can add  

the device that you want to set a parental control.  

1. Click “Advanced Settings> Guest Network”. In this interface, you can set your guest network.  

Power  

Solid green：The device is ready.  

Off：The device does not start or is not powered.  

1. Click “Advanced Settings> Network Control>Access Control”. In this interface, you can add the  

device that you want to set a access control.  

2. Q: How can I reset the router?  

13. Q: How can I turn on DNS?  

Note: Any questions, you can refer to FAQ firstly.  

A: Method 1: Keep pressing the Reset button for about 8 seconds to restore factory settings.  

Method 2: Please log in to the management page and click the “Reboot”. In this interface, you can  

turn on WPS.  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Advanced  

Settings> DNS”. In this interface, you can turn on DNS.  

IV:LED indicators  

14. Q: How can I update the firmware?  

2.4G  

5G  

Solid green: 2.4GHz Wi-Fi is connected.  

Off: 2.4G Wi-Fi is not connected.  

Blinking green: 2.4G Wi-Fi is sending or receiving traffic.  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Advanced  

Settings> System Tools>Firmware Upgrade”. In this interface, you can add the firmware file  

path and upgrade the firmware.  

3. Q: How can I turn on WPS?  

A: Method 1: Keep pressing the WPS button for about 3 seconds to start the WPS .  

Method 2: Please log in to the management page and click the “Advanced Settings>Wireless>WPS”.  

Jack/Port/Button  

USB  

Description  

rockspace-WiFi6-2.4g  

15. Q: How can I turn on DMZ?  

4. Q: How to change my admin password?  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Advanced  

Settings>Net Forwarding>DMZ”. In this interface, you can turn on DMZ.  

2. Turn on ‘’Parental Control” and click “Add”. You could enter the device name, MAC Address,  

access time restriction and choose the repeat mode.  

Solid green: 5GHz Wi-Fi is connected.  

Off: 5G Wi-Fi is not connected.  

Blinking green: 5G Wi-Fi is sending or receiving traffic.  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Advanced  

Settings>System Tools>Admin Password”. In this interface, you can change the admin password.  

2. Turn on ‘’Access Control”, choose “Blacklist” or “Whitelist” and click “Add”. You could enter the  

device name and MAC Address.  

The USB port is used to connect devices that support  

USB 3.0, and can also support USB 2.0.  

rockspace-WiFi6-2.4g  

FCC Statement  

This equipment has been tested and found to comply with the limits for a Class B digital device,  

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  

against harmful interference in a residential installation. This equipment generates, uses and can  

radiate radio frequency energy and, if not installed and used in accordance with the instructions,  

may cause harmful interference to radio communications. However, there is no guarantee that  

interference will not occur in a particular installation. If this equipment does cause harmful  

5. Q: How to change my network name and password?  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Wireless”. In this  

interface, you can change the network name and password.  

Reset/WPS  

Reset : Keep pressing the Reset button for 8 seconds  

to start the Reset, the product will restore factory  

settings.  

WPS  

Blinking green: WPS is turned on, waiting for terminal  

device to access.  

rockspace-WiFi6-5g  

interference to radio or television reception, which can be determined by turning the equipment off  

and on, the user is encouraged to try to correct the interference by one or more of the following  

measures:  

6. Q: What if I forget the network password of the router?  

Off: WPS is turned off.  

A: Please reset the router and login in the router to set it up again”.  

WPS : Keep pressing the WPS button for 3 seconds to  

start the WPS, the product can quickly connect to  

other devices that support WPS terminals.  

—Reorient or relocate the receiving antenna.  

—Increase the separation between the equipment and receiver.  

—Connect the equipment into an outlet on a circuit different from that to which the receiver is  

connected.  

rockspace-WiFi6-5g  

7. Q: How can I select my connection type?  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Internet”. In this  

interface, you can choose your connection type.  

—Consult the dealer or an experienced radio/TV technician for help.  

FCC Radiation Exposure Statement  

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment  

and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated  

in accordance with provided instructions and the antenna(s) used for this transmitter must be  

installed to provide a separation distance of at least 20 cm from all persons and must not be  

co-located or operating in conjunction with any other antenna or transmitter. End-users and  

installers must be provided with antenna installation instructions and consider removing the  

no-collocation statement.  

8. Q: What is the function of USB 3.0?  

LAN 1/2/3/4  

The LAN ports can connect wired devices such as  

computers or switches.  

A: First, the router will charge your smart phone. Besides, the USB 3.0 port can connect a USB storage  

device, which can be either a USB drive or a portal hard disk. The USB storage device connected can  

function as a FTP or Samba server for file sharing and be accessed with a computer. You can also  

manage the resources on the USB storage device with a computer.  

WAN  

The WAN port can connect this router to the internet.  

The Power port can connect the power.  

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  

conditions:  

(1) this device may not cause harmful interference, and  

(2) this device must accept any interference received, including interference that may cause  

undesired operation.  

9. Q: How can I select the time zone?  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Advanced  

Settings> System Tools>Time Settings”. In this interface, you can choose the time zone.  

Power  

Note: Click the “Network Map>Wireless Clients”, and you will find all the device name and MAC  

Address. After this setting, the router will reboot again. Please reconnect to the router.  

Note: Click the “Network Map>Wireless Clients”, and you will find all the device name and MAC  

Address. After this setting, the router will reboot again. Please reconnect to the router.  

Note: After this setting, the router will reboot again. Please reconnect to the router.  

10. Q: How can I add a Virtual Server?  

Caution!  

Any changes or modifications not expressly approved by the party responsible for compliance could  

void the user's authority to operate the equipment.  

A: Please log in to the management page(IP address is 192.168.1.1.) and click the “Advanced  

Settings> Nat Forwarding>Virtual Servers”. In this interface, you can add a new virtual server.  

7

8

9

10  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	rock space RSD0616 AX1800 Wi-Fi6 WiFi Router Installation Guide
Make	rock space
Language	English
Filetype	PDF (Download)
File size	0.45 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• rock space

Questions and Answers (0)

If you have any questions regarding rock space RSD0616 AX1800 Wi-Fi6 WiFi Router Installation Guide, please ask here and describe the problem in detail.