Home > RuiJie > Ruijie RG-EG105G(V2) Cloud Managed Router User Guide

Ruijie RG-EG105G(V2) Cloud Managed Router User Guide

Installation Guide  
Table 6-2 Connections of the Twisted Pairs of the 100BASE-TX/10BASE-T  
Appendix  
Optical Fiber Connection  
For the optical fiber ports, select single-mode or multiple-mode optical fibers for connection according to the fiber  
module connected. The connection schematic diagram is shown in Table 6-3:  
Table 6-3 Optical Fiber Connections  
6.2 Cabling Recommendations in Installation  
When the device is installed in standard 19-inch cabinets, the cables are tied in the binding rack on the cabinet  
by the cabling rack, and top cabling or bottom cabling is adopted according to the actual situation in the  
equipment room. All cable connectors should be placed at the bottom of the cabinet in an orderly manner instead  
of outside the cabinet easy to touch. Power cables are routed beside the cabinet, and top cabling or bottom  
cabling is adopted according to the actual situation in the equipment room, such as the position of the DC power  
distribution box, AC socket, or lightning protection box.  
6.2.1 Requirement for the minimum cable bend radius  
The bend radius of a power cord, communication cable, and flat cable should be greater than five times their  
respective diameters. The bend radius of these cables that often bend or suffer removal/insertion should be  
greater than seven times their respective diameters.  
The bend radius of a common coaxial cable should be greater than seven times its diameter. The bend radius  
of this type of cables that often bend or suffer removal/insertion should be greater than 10 times its diameter.  
The bend radius of a high-speed cable (SFP cable, for example) should be greater than five times its diameter.  
The bend radius of this type of cables that often bend or suffer removal/insertion should be greater than 10  
times its diameter.  
6.2.2 Requirement for the minimum fiber bend radius  
The diameter of a fiber tray to hold fibers cannot be less than 25 times the diameter of the fiber.  
When moving an optical fiber, the bend radius of the fiber should be equal to or greater than 20 times the  
diameter of the fiber.  
21  
         
GeneralDetails
NameRuijie RG-EG105G(V2) Cloud Managed Router User Guide
MakeRuiJie
LanguageEnglish
FiletypePDF (Download)
File size0.36 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding Ruijie RG-EG105G(V2) Cloud Managed Router User Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

one × 5 =

Ruijie EG105GWT Wi-Fi 5 1267Mbps Wireless All-in-One Router User Manual
Ruijie EG105GWT Wi-Fi 5 1267Mbps Wireless All-in-One Router User Manual
Ruijie RG-EG105GW All-in-One Wireless Router User Manual
Ruijie RG-EG105GW All-in-One Wireless Router User Manual
Ruijie EG105GWX All-In-One Wireless Router User Manual
Ruijie EG105GWX All-In-One Wireless Router User Manual
Ruijie RG-EG105GW-X Wi-Fi High Performance Router User Manual
Ruijie RG-EG105GW-X Wi-Fi High Performance Router User Manual
Ruijie 2AX5J-EG105GWX All-in-One Wireless Router User Manual
Ruijie 2AX5J-EG105GWX All-in-One Wireless Router User Manual
Ruijie RG-EW1800GX(PRO) Wi-Fi 6 Dual Band Router Installation Guide
Ruijie RG-EW1800GX(PRO) Wi-Fi 6 Dual Band Router Installation Guide
RuiJie Reyee RG-EW Series Router User Guide
RuiJie Reyee RG-EW Series Router User Guide
Ruijie E4 Networking Router Instruction Manual
Ruijie E4 Networking Router Instruction Manual
Ruijie RG-EG310GH-P-E 10 Port Gigabit Router User Manual
Ruijie RG-EG310GH-P-E 10 Port Gigabit Router User Manual
Ruijie RG-EW300T N300 Wireless 4G LTE Router User Guide
Ruijie RG-EW300T N300 Wireless 4G LTE Router User Guide

Ruijie RG-EG105G(V2) Cloud Managed Router User Guide