Ruijie RG-EG105G(V2) Cloud Managed Router User Guide
Installation Guide
Installing the Router
3.3 Mounting the Router
3.3.1 Mounting the Router to a Standard 19-inch Cabinet
Please note that RG-EG105G V2 and RG-EG105G-P V2 can not be mounted to a cabinet.
3.3.2 Mounting the Router to a Workbench
Please place the router on a clean workbench. The operation is as follows:
Step 1: Attach the four rubber pads to the four corners on the bottom.
Step 2: Place the router on the workbench and ensure good ventilation condition around the router.
3.4 Installing Power Cables
RG-EG105G V2 router uses 2-conductor power cables. You are suggested to use a single-phase 2-conductor
outlet or a multifunction microcomputer outlet with neutral connector.
RG- EG105G-P V2 series router uses 3-conductor power cables. You are suggested to use a single-phase 3-
conductor outlet or a multifunction microcomputer outlet with neutral connector. The neutral point of the power
supply shall be securely grounded in the building. In most buildings, the neutral point of a power supply has been
grounded during the construction. You need to make sure the power supply is properly grounded.
Please take the following steps:
Plug one end of the power cable into the power socket of the router, and plug the other end into the AC power
supply outlet.
Check whether the power LED on the front panel of the router lights up or not. The LED indicator will light up
if the power supply is properly connected.
3.5 Connecting the External Port Cables
Step 1: Connect one end of the RJ45 connector to the Ethernet interface of the device board, and the other end
to the NMS or a control terminal.
Step 2: Insert the twisted pair with the RJ45 port into the appropriate interface according to the identification on
the panel of the module. Distinguish the crossover cable and straight-through cable.
3.6 Installation Verification
3.6.1 Verifying the Cabinet
Verify if the external power supply matches the distribution panel of the cabinet.
After equipment is installed, verify if the front/back cabinet doors can be closed.
Verify that the cabinet has been fastened completely, and does not move or tilt.
Verify that the equipment has been installed in the cabinet, and all the cables have been fastened to the
cabinet.
15
| General | Details |
|---|---|
| Name | Ruijie RG-EG105G(V2) Cloud Managed Router User Guide |
| Make | RuiJie |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.36 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Ruijie RG-EG105G(V2) Cloud Managed Router User Guide, please ask here and describe the problem in detail.
Ruijie EG105GWT Wi-Fi 5 1267Mbps Wireless All-in-One Router User Manual
Ruijie RG-EG105GW All-in-One Wireless Router User Manual
Ruijie EG105GWX All-In-One Wireless Router User Manual
Ruijie RG-EG105GW-X Wi-Fi High Performance Router User Manual
Ruijie 2AX5J-EG105GWX All-in-One Wireless Router User Manual
Ruijie RG-EW1800GX(PRO) Wi-Fi 6 Dual Band Router Installation Guide
RuiJie Reyee RG-EW Series Router User Guide
Ruijie E4 Networking Router Instruction Manual
Ruijie RG-EG310GH-P-E 10 Port Gigabit Router User Manual
Ruijie RG-EW300T N300 Wireless 4G LTE Router User Guide
NIRAD Networks N200-I-SDWAN-EDGE EDGE Router Installation Guide
ADVANTECH ICR-3200 Cellular Router Instruction Manual
PROSCEND M330 Series Cellular Router Installation Guide
UBIQUITI U-LTE-Backup Pro LTE Router Installation Guide
JUNIPer SSR120 Session Router User Guide
inseego FW2000e Wavemaker 5G Outdoor CPE Router Owner’s Manual
MERCUSYS MB110-4G Mbps Wireless N 4G LTE Router Installation Guide
cradlepoint E110 Enterprise Branch Router User Manual
FESTOOL OF 1400 EB Router User Manual
NETGEAR R6300 WiFi Router Instruction Manual