Ruijie RG-EW3000GX Reyee Wi-Fi Router Installation Guide
RG-EW3000GX Quick Installation Guide
Managing the Router
Method 1: App-based Configuration
Scan the QR code to download the Ruijie Reyee APP to manage the router. You can check
the connection status and change the Wi-Fi name and password through Ruijie Reyee APP.
About the RG-EW3000GX Router
Ruijie Reyee APP
Method 2: Web-based Configuration
Connect the PC or phone to the SSID @Ruijie-sXXXX broadcast by the router. Access the
Web management IP address 192.168.110.1 by browser to perform configuration.
Installing a Single Router
RG-EW3000GX
1GE LAN Port
1GE Ethernet Port (WAN/LAN)
Reset Button
1GE WAN Port
Power Input Plug
Reyee Mesh LED
Reyee Mesh Button
Quick Installation Guide
Status
Solid on
Off
Description
Mesh pairing succeeds.
Mesh pairing is not performed./Mesh network is disconnected.
Mesh pairing is in progress.
Blinking
System Status LED
Status
Green
Description
Solid on
The router is functioning properly and is connected to the Internet.
Blinking The router is starting up, being reset, or upgrading.
System Status LED
Orange Solid on The signal strength of the mesh link is low (secondary router).
Red
Solid on The router is not connected to the Internet.
Nameplate
WAN Port
The nameplate contains product name, model, power parameters, and
default IP address.
Nameplate
Connect the
Connect the
After the system status LED
turns solid on, connect the PC or
phone to the SSID @Ruijie-sXXXX
broadcast by the router. You will be
redirected to the configuration page
automatically. Follow the prompts to
complete the configuration.
Ethernet cable.
power supply.
Packaging Contents
Check the router and all accessories after removing the packaging materials.
Router x 1, Power Adapter x 1, Quick Installation Guide x 1, Warranty Card x 1
*If the configuration page does not pop up,
access the Web management IP address
192.168.110.1 by browser to perform
configuration as prompted.
ISP Modem
1GE LAN Port
Power Supply
and Network cable x 1
1
2
Connecting Multiple Routers Through Reyee Mesh
2. Insert one end of the Ethernet cable into the WAN port (yellow) of the secondary
router and connect the other end to the LAN port of the primary router. Power on the
routers and wait for a few minutes until the system status LED turns solid green.
Press the Reyee Mesh button on the primary router to complete wired mesh pairing.
The Wi-Fi name and password of the secondary router are automatically synchro-
1. Connect the first router to the Internet and configure it as the primary router.
For the configuration steps, see the preceding section.
nized with those of the primary router.
Ensure that the secondary router is in its factory settings. Press and hold the Reset button using
a pin for about 10 seconds to restore the router to factory settings.
What can I do if I fail to log in to the Web management system (192.168.110.1) of the
router?
Reyee Mesh Button
(1) Ensure that the PC’s NIC is set to Obtain an IP address automatically.
(2) Make sure that the PC is connected to one of the LAN1/2/3/4 ports and the port status LED is on.
Otherwise, replace the Ethernet cable with a new one.
(3) Restart your browser (Google Chrome is recommended) and retry by entering 192.168.110.1 in
the address bar.
2. Place the secondary router 2 meters (6.56 in.) away from the primary router, and power
it on.
Wait for a few minutes until the system status LED on the secondary router turns from blinking
green to solid red, indicating that the router completes startup.
Ensure that the secondary router is in its factory settings. If the router has been configured before,
use a pin to press to restore the router to factory settings before performing step 3.
(4) Use other Web browsers.
(5) Replace the Ethernet cable or the PC.
3. Press the Reyee Mesh button on the primary router. Mesh pairing succeeds in 2 minutes.
Press and hold the Reset button using a pin for about 10 seconds to restore the router to factory
settings.
The Reyee Mesh LEDs on both routers blinks for about 2 minutes during mesh pairing. When both
LEDs stop blinking and turn solid on, mesh pairing succeeds. The Wi-Fi name and password of the
secondary router are automatically synchronized with those of the primary router.
What can I do if I cannot access the Internet after configuring the router?
(1) Check that the Ethernet cable is properly connected as instructed in the section Installing a
Single Router.
4. Place the secondary router where the Wi-Fi signal strength needs to be improved and
(2) Choose Internet on the web page to check the Internet access mode.
If your ISP has provided a broadband account and password, select PPPoE and enter the
account and password. If your ISP has provided IP address, subnet mask, gateway, and DNS
server, select Static IP and enter the parameters.
then power on the router.
There is no need to configure the secondary router after power-on. After the system status LED
turns solid green, you can connect to the SSID broadcast by the router for Internet access.
If the system status LED is solid orange or red, move the two routers to avoid a long distance,
or too many walls or other obstacles between them.
·
(3) If you still fail to access the Internet, contact your ISP for help.
If you have multiple routers, repeat steps 2 to 4 to connect them one by one. Up to six routers
are allowed for mesh networking, including one primary router and five secondary routers.
What can I do if I forget the management password?
Try to log in using the Wi-Fi password. If it does not work, restore the router to factory settings.
Connecting Multiple Routers with Ethernet Cables
1. Connect the first router to the Internet and configure it as the primary router.
How to restore the router to factory settings?
Use a pin to press and hold the Reset button for 10 seconds until the system status LED starts blinking,
and then release the button. After the system status LED turns solid on, the router will broadcast the SSID
@Ruijie-sXXXX, indicating that the router is restored to factory settings successfully.
Primary Router
Secondary Router
Connect the Internet
LAN Port
WAN Port
5
3
4
| General | Details |
|---|---|
| Name | Ruijie RG-EW3000GX Reyee Wi-Fi Router Installation Guide |
| Make | RuiJie |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.82 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Ruijie RG-EW3000GX Reyee Wi-Fi Router Installation Guide, please ask here and describe the problem in detail.
Ruijie EG105GWT Wi-Fi 5 1267Mbps Wireless All-in-One Router User Manual
Ruijie RG-EG105GW All-in-One Wireless Router User Manual
Ruijie EG105GWX All-In-One Wireless Router User Manual
Ruijie RG-EG105GW-X Wi-Fi High Performance Router User Manual
Ruijie 2AX5J-EG105GWX All-in-One Wireless Router User Manual
Ruijie RG-EG105G(V2) Cloud Managed Router User Guide
Ruijie RG-EW1800GX(PRO) Wi-Fi 6 Dual Band Router Installation Guide
RuiJie Reyee RG-EW Series Router User Guide
Ruijie E4 Networking Router Instruction Manual
Ruijie RG-EG310GH-P-E 10 Port Gigabit Router User Manual
TP-Link AX6600 Tri Band WiFi 6 Router Installation Guide
IMOU AX3000 Wi-Fi 6 Smart Router User Guide
ASUS ExpertWiFi EBM68 AX7800 Tri Band WiFi Router User Guide
airlive OLT-2XGS Wifi 6 MESH Router User Guide
ZYXEL NBG7510 Dual Band WiFi 6 AX1800 Router User Guide
zpe Nodegrid Virtual Services Router Owner’s Manual
LANCOM Systems 1793VA VDSL Voip VPN Router User Guide
TP-Link T150500-2-DT WiFi Router Instruction Manual
ASUS RT-AX58U AX3000 Dual Band Wi-Fi Router User Guide
IQ WiFi 6 Router Installation Guide