Home > LANCOM SYSTEMS > LANCOM Systems 1793VA VDSL Voip VPN Router User Guide
LANCOM Systems 1793VA VDSL Voip VPN Router User Guide
LANCOM 1793VA
Hardware
Power supply
12 V DC, external power adapter (230 V); bayonet connector to secure against disconnec-
tion
Gigabit Ethernet 10/100/1000
TE / NT
NT
Power consumption Max. 15 W
Environment
Housing
Temperature range 0–35 °C; humidity 0–95 %, non-condensing
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock;
dimensions 210 x 45 x 140 mm (W x H x D)
➀
➁ ➂
➃
➄
➅
➆➇
➈
VDSL / ADSL
ETH 4
ETH 3
ETH 2
ETH 1
Analog 2/4 Analog 1/3
Config (Com)
ISDN 1
ISDN 2
USB
DC 12 V
Number of fans
Interfaces
None; fanless design without rotating parts, high MTBF
➀ Power
➄ ISDN 1, 2
Off
Green, permanently D-channel active
Off
Device switched off
Interface deactivated
WAN: VDSL2
VDSL2 as per ITU G.993.2; profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a, 35b
VDSL Supervectoring as per ITU G.993.2 (Annex Q)
VDSL2 vectoring as per ITU G.993.5 (G.Vector)
Compatible with VDSL2 and U-R2 from Deutsche Telekom (1TR112)
ADSL2+ over ISDN as per ITU G.992.5 Annex B/J with DPBO, ITU G.992.3, and ITU G.992.1
ADSL2+ over POTS as per ITU G.992.5 Annex A/M with DPBO, ITU G.992.3, and
ITU.G.992.1
Green, permanently* Device operational, resp. device paired
/ claimed and LANCOM Management
Cloud (LMC) accessible
➀
➁
➂
➃
➄
➅
➆
Green, flickering
Red, flickering
ISDN data transfer
ISDN transfer error
Red / green blinking Configuration password not set.
Without a configuration password,
the configuration data in the device is
unprotected.
Red / orange, blinking ISDN hardware error
➅ ETH 1, 2, 3, 4
Supports just one virtual connection at a time in ATM (VPI-VCI pair)
Off
No networking device attached
VDSL / ADSL interface
Use the supplied DSL cable for the IP-based line to
connect the VDSL interface and the provider’s telephone
socket. For more information, please contact your Internet
service provider.
ISDN interfaces
ISDN 1:
Internal (NT) or external (TE) ISDN bus.
This feature is controlled by LCOS.
ISDN 2:
ETH
4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode.
Up to 3ꢀports can be operated as additional WAN ports. Ethernet ports can be electrically
disabled in the LCOS configuration.
➀
➄
Hardware Quick Reference
Red blinking
Charge or time limit reached
Green, permanently Connection to network device
operational, no data traffic
1x green inverse
blinking*
Connection to the LMC active, pairing
OK, device not claimed
USB
USB 2.0 hi-speed host port for connecting USB printers (USB print server),
serial devices (COM-port server) or USB drives (FAT file system)
Green, flickering
➆ VoIP
Off
Data transmission
2x green inverse
blinking*
Pairing error, resp. LMC activation code
not available
LANCOM 1793VA
ISDN 1 / ISDN 2
ISDN 1: Internal (NT) or external (TE) ISDN bus. This feature is controlled by LCOS. Accor-
ding to the settings, connect an ISDN cable either to the NTBA or the ISDN terminal device.
ISDN 2: Internal (NT) ISDN bus. Use an ISDN cable to connect the ISDN device to the ISDN
interface.
Internal (NT) ISDN bus.
3x green inverse
blinking*
LMC not accessible,
resp. communication error
No SIP accounts defined or VCM is off
Ethernet interfaces
Use an Ethernet cable to connect one of the interfaces
ETH 1 to ETH 4 to your PC or a LAN switch.
➁
➂
Green, permanently All defined and active SIP accounts
(outgoing) were successfully
registered
A 100-Ohm resistor for line termination is
switchable in LCOS.
➁ Online
Analog 1 / Analog 3 Use the cable of your analog devices to connect them with the analog interfaces. If
Analog 2 / Analog 4 necessary use the adapters from the LANCOM Analog Adapter Set.
Off
WAN connection inactive
Red, permanently
Not all defined and active SIP accounts
were registered (possibly still in
process)
Green, blinking
WAN connection is established (e.g.
PPP negotiation)
USB interface
You can use the USB interface to connect a USB
printer or a USB memory stick.
➅
➆
Config (Com) / V.24 Serial configuration interface/COM-port (8-pin mini-DIN): 9,600 - 115,200 baud, suitable
for optional connection of analog/GPRS modems. Supports internal COM-port server and
provides transparent asynchronous serial-data transfer via TCP.
Analog interfaces
Connect analog terminal devices to the analog interfaces
either directly via RJ11, or with the help of the enclosed
TAE adapters.
Green, permanently WAN connection active
Red or green,
inverse flashing
Number of currently used lines
(connecting or connected)
Red, permanently
➂ DSL
WAN connection error
WAN protocols
Power
➇ VPN
Further adapters are optionally available.
VDSL, ADSL,
Ethernet
PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without
DHCP), RIP-1, RIP-2, VLAN
After connecting the cable to the device, turn the bay-
onet connector 90° clockwise until it clicks into place.
Use only the supplied power adapter.
Off
Interface deactivated
Off
VPN connection inactive
Green, permanently DSL connection active
ISDN
DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD
Configuration interface
➃
Green, permanently VPN connection active
Green, flickering
Red, flickering
DSL data transfer
DSL transfer error
Use a serial configuration cable to connect the serial
interface (COM) to the serial interface of the device
you want to use for configuring / monitoring (separately
available).
Green, flashing
VPN connecting
Package content
➈ Reset
Cable
1 DSL cable for an IP-based line, 4.25 m
Red / orange, blinking DSL hardware error
Orange, blinking DSL training
Orange, permanently DSL sync
Adapters
Power adapter
2 TAE adapters (RJ11 - TAE)
Reset button
Operated e.g. with a paper clip
short press: Restart the device
long press: Reset the device
External power supply adapter (230 V), 12 V / 2 A DC/S; barrel / bayonet (EU),
LANCOM item no. 111303 (not for WW devices)
Green, blinking
➃ Analog 1, 2, 3, 4
Off
DSL connecting
Interface deactivated
Green, permanently Interface activated
Orange, blinking
Green, blinking
Incoming call
Connection active
Before initial startup, please make sure to take notice of the information
regarding the intended use in the enclosed installation guide!
Please observe the following when setting up the device
→The power plug of the device must be freely accessible.
i
→For devices to be operated on the desktop, please attach the adhesive rubber footpads
→Do not rest any objects on top of the device
Operate the device only with a professionally installed power supply at a
nearby power socket that is freely accessible at all times.
*) The additional power LED statuses are displayed in 5-seconds rotation if the device is configured to be managed by the LANCOM Manage-
ment Cloud.
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance
with Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU
Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
→Keep all ventilation slots on the side of the device clear of obstruction
→In case of wall mounting, use the drilling template as supplied
→Rack installation with the optional LANCOM Rack Mount (separately available)
This product contains separate open-source software components which are subject to their own licenses, in particular the General Public
License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License
information“. If the respective license demands, the source files for the corresponding software components will be made available on a down-
load server upon request.
Cloud-ready
| General | Details |
|---|---|
| Name | LANCOM Systems 1793VA VDSL Voip VPN Router User Guide |
| Make | LANCOM SYSTEMS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.09 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding LANCOM Systems 1793VA VDSL Voip VPN Router User Guide, please ask here and describe the problem in detail.
LANCOM SYSTEMS 1800EF-4G High Availability Networking Via Fiber Router Owner’s Manual
LANCOM SYSTEMS 1930EF Gigabit Ethernet Black Wired Router User Guide
LANCOM SYSTEMS 1790-4G+ High-Performance VPN Router Installation Guide
LANCOM SYSTEMS 1790VAW GmbH Performance Router User Guide
LANCOM SYSTEMS 1800EFW-5G Router Installation Guide
LANCOM Systems 1780EW-4G+ High Performance Mobile VPN Router User Guide
LANCOM SYSTEMS IAP-4G Plus LTE 4G Router User Guide
LANCOM SYSTEMS LANCOM OAP-830 Wireless Router User Guide
LANCOM SYSTEMS LANCOM 1790-4G Plus High-Performance VPN Router Instruction Manual
LANCOM SYSTEMS VPN 1900EF Router Instruction Manual
ZTE E1320 WiFi 6 Wireless Router User Manual
DrayTek VDSL2 Security Router User Guide
CalAmp LMU-5541 Telematics Router Installation Guide
peplink MAX BR1 Pro 5G Pepwave Router User Manual
rock space RSD0616 AX1800 Wi-Fi 6 WiFi Router Installation Guide
TP-Link AX6600 Tri Band WiFi 6 Router Installation Guide
AirLive Wireless Series Wi-Fi AP Router User Manual
TP-Link ER706W Wi-Fi Router User Guide
D-Link DIR-615 Wireless Router User Manual
advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide