Home > LANCOM SYSTEMS > LANCOM SYSTEMS VPN 1900EF Router Instruction Manual

LANCOM SYSTEMS VPN 1900EF Router Instruction Manual

Hardware  
Power supply  
Internal power supply unit (100–240 V, 50-60 Hz)  
Power consumption Max. 18 W  
POWER  
Environment  
Housing  
Temperature range 0–40 °C, humidity 0–95 %; non-condensing  
Robust metal housing, 1 HU with mounting brackets for 19“ installation,  
345 x 44 x 253 mm (W x H x D)  
POWER  
Number of fans  
Interfaces  
None; fanless design, no rotating parts, high MTBF  
WAN 1 / WAN 2  
WAN 1 SFP: Compatible with optional LANCOM SFP modules. Set as a WAN port ex-facto-  
ry, can be configured as a LAN port.  
VPN / POWER  
RESET  
WAN 1 / WAN 2 TP: 10 / 100 / 1000 Base-TX, autosensing full duplex (WAN 1) / autosensing  
(WAN 2), auto node hub  
Reset button  
short press > Restart the device  
long press > Reset the device  
VPN  
Off  
VPN connection inactive  
ETH1 - ETH 4  
4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode.  
Up to 3 ports can be operated as additional WAN ports. Ethernet ports can be electrically  
disabled in the LCOS configuration.  
Green, permanently VPN connection active  
WAN 1 / WAN 2  
Green, flashing  
VPN connecting  
Green, orange off  
No networking device connected  
POWER  
Config (Com) / V.24 Serial configuration interface / COM-port: 9,600 - 115,200 baud  
Green, permanently Connection to network device  
operational, no data traffic  
Hardware Quick Reference  
Off  
Device switched off  
USB  
USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices  
(COM-port server) or USB drives (FAT file system)  
Green, permanently* Device operational, resp. device paired  
/ claimed and LANCOM Management  
Cloud (LMC) accessible  
Green, flickering  
Orange off  
Data transmission  
1000 Mbps  
WAN protocols  
WAN 1 interfaces (SFP / TP combo port)  
Configuration interface  
LANCOM 1900EF  
Ethernet  
PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1,  
RIP-2, VLAN, GRE, EoGRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and  
IPv4/IPv6 dual stack session), IP(v6)oE (autoconfiguration, DHCPv6 or static)  
Orange,  
permanently  
10 / 100 Mbps  
Insert a suitable SFP module (e.g. 1000Base-SX or  
1000Base-LX) into the SFP port. Choose a cable  
compatible with the SFP module and connect it as  
described in the module’s documentation. SFP module  
and cable are not included.  
If desired, alternatively connect the WAN 1 TP interface  
to a WAN modem using the provided Ethernet cable with  
green connectors.  
To configure the device via the serial interface, a  
serial configuration cable is required  
(available as an accessory).  
Green / red, blinking No password set. Without a password  
the configuration data in the device is  
unprotected.  
ETH 1 - ETH 4  
Package content  
Red, blinking  
Charge or time limit reached  
Green, orange off  
No networking device connected  
USB interface  
You can use the USB interface to connect a USB  
printer or a USB storage device.  
Cables  
1 Ethernet cable, 3 m (kiwi colored connectors);  
1 Ethernet cable, 3 m (green connectors);  
1 IEC power cord 230 V (not for WW devices)  
1x green inverse  
blinking*  
Connection to the LMC active, pairing  
OK, device not claimed  
Green, permanently Connection to network device  
operational, no data traffic  
2x green inverse  
blinking*  
Pairing error, resp. LMC activation code  
not available  
Green, flickering  
Orange off  
Data transmission  
1000 Mbps  
Mounting brackets Two 19” brackets for rack mounting  
Power connector and grounding point  
(device back side)  
Supply power to the device via the power connector.  
Please use the IEC power cable supplied  
(separately available for WW devices).  
3x green inverse  
blinking*  
LMC not reachable resp.  
communication error  
WAN 2 interface (TP)  
Connect the WAN 2 interface to a WAN modem using the  
provided Ethernet cable with green connectors.  
Orange,  
permanently  
10 / 100 Mbps  
Warning! High touch current.  
Connect to earth before  
connecting the power supply.  
Ethernet interface  
Use the cable with the kiwi-colored connectors to  
connect one of the interfaces ETH 1 to ETH 4 to your PC  
or a LAN switch.  
ATTENTION: High touch current possible! Connect to  
earth before connecting the power supply.  
Before initial startup, please make sure to take notice of the information  
regarding the intended use in the enclosed installation guide!  
Please observe the following when setting up the device  
The mains plug of the device must be freely accessible.  
i
For devices to be operated on the desktop, please attach the adhesive rubber footpads  
Do not rest any objects on top of the device and do not stack multiple devices  
Keep all ventilation slots of the device clear of obstruction  
Operate the device only with a professionally installed power supply at a  
nearby power socket that is freely accessible at all times.  
*) The additional power LED statuses are displayed in 5-seconds rotation if the device is configured to be managed by the LANCOM Management  
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance  
with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of  
Conformity is available at the following Internet address: www.lancom-systems.com/doc/  
Cloud.  
Mount the device into a 19” unit in a server cabinet using the provided screws and mounting  
brackets. Pay attention to the “R” and “L” marks on the brackets for accurate mounting.  
Cloud-ready  
GeneralDetails
NameLANCOM SYSTEMS VPN 1900EF Router Instruction Manual
MakeLANCOM SYSTEMS
LanguageEnglish
FiletypePDF (Download)
File size0.1 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding LANCOM SYSTEMS VPN 1900EF Router Instruction Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

4 × 5 =

LANCOM SYSTEMS 1800EF-4G High Availability Networking Via Fiber Router Owner’s Manual
LANCOM SYSTEMS 1800EF-4G High Availability Networking Via Fiber Router Owner’s Manual
LANCOM SYSTEMS 1930EF Gigabit Ethernet Black Wired Router User Guide
LANCOM SYSTEMS 1930EF Gigabit Ethernet Black Wired Router User Guide
LANCOM SYSTEMS 1790-4G+ High-Performance VPN Router Installation Guide
LANCOM SYSTEMS 1790-4G+ High-Performance VPN Router Installation Guide
LANCOM SYSTEMS 1790VAW GmbH Performance Router User Guide
LANCOM SYSTEMS 1790VAW GmbH Performance Router User Guide
LANCOM SYSTEMS 1800EFW-5G Router Installation Guide
LANCOM SYSTEMS 1800EFW-5G Router Installation Guide
LANCOM Systems 1780EW-4G+ High Performance Mobile VPN Router User Guide
LANCOM Systems 1780EW-4G+ High Performance Mobile VPN Router User Guide
LANCOM Systems 1793VA VDSL Voip VPN Router User Guide
LANCOM Systems 1793VA VDSL Voip VPN Router User Guide
LANCOM SYSTEMS IAP-4G Plus LTE 4G Router User Guide
LANCOM SYSTEMS IAP-4G Plus LTE 4G Router User Guide
LANCOM SYSTEMS LANCOM OAP-830 Wireless Router User Guide
LANCOM SYSTEMS LANCOM OAP-830 Wireless Router User Guide
LANCOM SYSTEMS LANCOM 1790-4G Plus High-Performance VPN Router Instruction Manual
LANCOM SYSTEMS LANCOM 1790-4G Plus High-Performance VPN Router Instruction Manual

LANCOM SYSTEMS VPN 1900EF Router Instruction Manual
Get PDF manual for the LANCOM SYSTEMS VPN 1900EF Router Instruction Manual for free. Access setup steps, installation & Wi-Fi configuration, and troubleshooting tips. 👉 View user guide online or download now!