TELTONIKA OTD140 4G Outdoor Router User Guide
DATASHEET // OTD140
FEATURES
MOBILE
Mobile module
4G (LTE) - LTE Cat 4 150 Mbps DL, 50 Mbps UL; 3G - 21 Mbps DL, 5.76 Mbps UL; 2G - 236.8 kbps DL, 236.8 kbps UL
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail,
SIM idle protection
SIM switch
Status
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS,
scheduled SMS, SMS autoreply, SMPP
SMS
USSD
Supports sending and reading Unstructured Supplementary Service Data messages
Operator black/white list
Black/White list
Band management
APN
Band lock, Used band status display
Auto APN
Bridge
Direct connection (bridge) between mobile ISP and device on LAN
Router assigns its mobile WAN IP address to another device on LAN
Passthrough
ETHERNET
2 x ETH ports (can be configured as WAN), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports
auto MDI/MDIX crossover
LAN
POE IN
PoE ports
1 x PoE In
802.3af/at
PoE standards
POE OUT
PoE ports
1 x PoE Out
802.3af
PoE standards
PoE Max Power per Port (at PSE) 15 W (only available if device is powered by 802.3at PoE In)
NETWORK
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP,
Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
Network protocols
VoIP passthrough support
Connection monitoring
Firewall
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Port forward, traffic rules, custom rules
Firewall status page
View all your Firewall statistics, rules, and rule counters
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed,
and so on
Ports management
Network topology
DHCP
Visual representation of your network, showing which devices are connected to which other devices
Static and dynamic IP allocation, DHCP Relay
QoS / Smart Queue
Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS
Supported >25 service providers, others can be configured manually
VRRP, Wired options, each of which can be used as an automatic Failover
Network backup
Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden,
user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable
themes and option to upload and download customised hotspot themes
Hotspot
SSHFS
Possibility to mount remote file system via SSH protoco
3
Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
| General | Details |
|---|---|
| Name | TELTONIKA OTD140 4G Outdoor Router User Guide |
| Make | teltonika |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.25 MB |
If you have any questions regarding TELTONIKA OTD140 4G Outdoor Router User Guide, please ask here and describe the problem in detail.

TELTONIKA 4G LTE Wi-Fi Dual-SIM Router RUT950 User Guide

TELTONIKA RUTX09 Cellular IoT Router User Guide

TELTONIKA RUT850 E-mark approved LTE Router User Guide

TELTONIKA RUT955 LTE Router User Guide

TELTONIKA RUTX14 CAT12 Cellular IoT Router User Guide

TELTONIKA RUT950 CAT4 LTE Router User Guide

Teltonika RUT955 Dual SIM 4G LTE and WiFi Cellular Router User Guide

TELTONIKA RUT260 LTE Router User Manual

TELTONIKA RUT301 Router User Guide

Teltonika RUT241 LTE Router Owner’s Manual























